Lightolier Arco Oval Series Guida

LIGHTOLIER a GENLYTE company.

631 Airport Road, Fall River, MA 02720

Read and understand these instructions before installing fixture.

This fixture is intended for installation in accordance with the National Electrical Code and local or Federal

code specifications. To prevent electric shock, turn off electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

IS:4511

0995

Instructions for Installation of ArcoOval Series Fixtures.

Page 1 of 2

NOTE:

This instruction sheet covers both compact fluorescent and incandescent fixtures. Although illustration shows compact fluorescent, the

incandescent version assembles and installs in the same manner.

NOTE:

The Backplate is provided with (4) Auxiliary Mounting Knockout

holes for direct mounting to wall surfaces. These can be used for

added security or where direct Outlet Box mounting is not

available. To remove plug in Knockout holes, follow steps 1 through

3 below. This Backplate can be mounted horizontally of vertically.

See Fig 1 below for proper orientation for type of Lens Assembly

and desired position.

1. Position blunt ended punch or awl in center of Knockout hole and

firmly hit with hammer to punch plug through. Repeat for remaining

Knockouts (Fig. 1).

Caution: Always wear eye protection (safety goggles) when

removing Auxiliary Mounting Knock-Outs.

2. Position Backplate in desired position over Outlet Box and mark

location of (4) Auxiliary Holes on wall surface.

3. Determine the appropriate mounting hardware required for type of

wall material fixture is being mounted to (i.e. toggle bolts or molly

screws for plaster or gysum board walls, wood screws, etc.)

4. Thread Crossbar Mounting Screws into Crossbar as shown in

Fig. 1.

5. Using appropriate slots in Crossbar, secure Crossbar to Outlet

Box using Outlet Box Screws (provided with Outlet Box).

6. While supporting Backplate make connections: black fixture lead

or fixture without tracer marks to hot (black) supply lead; white

fixture lead or fixture lead with tracer markers to neutral (white)

supply lead. Un-insulated wire is a ground wire and must be

connected to grounding terminals or ground lead inside Outlet Box.

Use Wire Nuts (local hardware item). Push connections back into

Outlet Box.

FIG.1

AX.

Wire Nut

Outlet Box

Crossbar

Outlet Box Screws

Ground Wire

Backplate

Gasket

Mounting Hole

Safety Cable

Battery Nut

Loop

Mounting Screw

Lens Assembly

Crossbar Mounting

Screws

Auxiliary Mounting

Knock-out

Position this edge of Backplate up for

horizontal mounting of these Lens Assemblies.

Position this edge

of Backplate up

for vertical

mounting of this

Lens Assembly

LIGHTOLIER a GENLYTE company.

631 Airport Road, Fall River, MA 02720

7. Position Backplate over Crossbar allowing Crossbar Mounting

Screws to come through Holes in Backplate. Secure Backplate

in position by installing (2) Battery Nuts over Crossbar Mounting

Screws and tighten.

8. If using Auxiliary Mounting Knockout, install the appropriate

hardware determined in step 3.

9. Position Screw through Loop in Safety Cable and thread Screw

into Mounting Boss on inside of Lens Assembly (Fig. 2).

10. Install recommended lamp(s).

11. Position Lens Assembly over Backplate making certain the

Safety Cable does not interfere with the Gasket (fig. 1).

12. Secure Lens Assembly in place by tightening the (2) Mounting

Screws on the face of Lens Assembly.

CAUTION: Maximum wattage as marked on fixture must not

be exceeded.

WARNING--(Risk of Fire) most dwellings built before 1985

have supply wire rated for 60° C. Consult a qualified

electrician before installing.

CAUTION: For wet locations, in accordance with

Underwriters Laboratories requirements, a line of caulking

compound such as acrylic latex or silicone must be placed

around the perimeter of Backplate to seal water away from

the outlet box and back openings.

IS:4511

0995 Page 2 of 2

Instructions for Installation of ArcoOval Series Fixtures.

Glass

Mounting Boss

Lens Assembly

Loop

Mounting

Screw

Safty

Cable

FIG. 2

Inside Lens Assembly

Questo manuale è adatto per i seguenti modelli

Altri manuali Lightolier Apparecchio di illuminazione

Lightolier

Lightolier Calculite C6T6VN Manuale utente

Lightolier

Lightolier Calculite Evolution Non-IC Airseal C3ALV Manuale utente

Lightolier

Lightolier Lytespan 8103 Manuale utente

Lightolier

Lightolier WA Series 232 Manuale utente

Lightolier

Lightolier LOW VOLTAGE FRAME-IN KIT Manuale utente

Lightolier

Lightolier 1104F2632ES Manuale utente

Lightolier

Lightolier Calculite ProSpec PA1P3075 Manuale utente

Lightolier

Lightolier Lytecaster 304PX Manuale utente

Lightolier

Lightolier UniFrame 1101FDL Manuale utente

Lightolier

Lightolier QHE1GPFOP128 Manuale utente

Lightolier

Lightolier Lytecaster 1000LVNT Manuale utente

Lightolier

Lightolier C6CW SERIES Manuale utente

Lightolier

Lightolier Calculite 8068 Manuale utente

Lightolier

Lightolier Lytespan 22SS3 Manuale utente

Lightolier

Lightolier Lytespan LCAWTSX Manuale utente

Lightolier

Lightolier Soli ADA Series Manuale utente

Lightolier

Lightolier BI-LYTER Manuale utente

Lightolier

Lightolier C4AICLV Manuale utente

Lightolier

Lightolier SC4WC232 Manuale utente

Lightolier

Lightolier Linear PerfLyte series Guida

Lightolier

Lightolier PRISMALYTE plus PRA2GRFVA432 Manuale utente

Lightolier

Lightolier Calculite CLW7P56D Manuale utente

Lightolier

Lightolier Lytespan 8292F3E Manuale utente

Lightolier

Lightolier Lytecel LL4MF8LR254 Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

ArtFox

ArtFox Beam 15R extreme Manuale utente

GLG

GLG multispot 330 Manuale utente

Home Accents Holiday

Home Accents Holiday TY052-1924-1 Manuale utente

SELF Electronics

SELF Electronics FLEX Manuale utente