Lightspeed Redcat media Manuale utente

User Manual

Classroom Audio System

Table of Contents

MAINTENANCE & TROUBLESHOOTING

31 Flexmike Battery Replacement

32 Sharemike Battery Replacement

33 Redcat Battery Replacement

34 Troubleshooting

WARRANTY, SAFETY & SPECIFICATIONS

35 Five-Year Limited Warranty

36 Safety Warnings and Certifications

42 System Components

43 System Specifications

OVERVIEW

3Important Safety Instructions

5System Components and Unpacking

6Optional Accessories

7Controls and Connections

9Flexmike Controls and Connections

SET-UP & USE / OPERATION

11 Determine Set-Up Location

15 Connecting the Power Supply

16 Audio Integration

17 Charging the Flexmike

18 Operating the Flexmike

19 Output to Assistive Listening Device (ALD)

20 Using Flexmike as Wireless Audio Link

OPTIONAL ACCESSORIES

22 Sharemike Controls and Connections

23 Sharemike: Charging

24 Sharemike: Initial Set-Up

25 Media Connector Controls and Indicators

27 Using The Media Connector

28 Audio Integration with Media Connector

29 Activate System with Pods for Small Group Instruction

30 Battery Pack for Redcat

OVERVIEW

Important Safety Instructions

OVERVIEW

1. Do not use the apparatus near water.

2. Clean only with dry cloth.

3. Do not block any ventilation openings.

4. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

5. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding- type plug has two blades

and a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the

outlet.

6. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

7. Unplug this apparatus during lightning storms or when unused

for long periods of time.

8. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

9. When the mains plug or appliance coupler is used as the

disconnect device, it shall remain readily operable.

10. Please keep the unit in a good ventilation environment.

11. WARNING: To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

12. Apparatus shall not be exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall be placed on the

apparatus.

13. WARNING: Battery pack shall not be exposed to excessive heat

such as sunshine, fire or the like.

OVERVIEW

To avoid potential equipment damage and/or serious injury, READ AND FOLLOW

all safety precautions when installing the TOPCAT. WARNINGS are included

throughout the procedural steps in this guide, and are repeated below for

emphasis.

•USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The TOPCAT

system uses standard 100 – 240VAC power. Obtain the services of a licensed

electrician when supplying and connecting power to the ceiling enclosure. BE

SURE electrical installation complies with local building codes. Improperly

installing and/or connecting power to the system may result in EQUIPMENT

DAMAGE, serious INJURY and/or DEATH.

•DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs

(9 kg), and requires at least two people to install. DO NOT install alone.

•USE SUITABLE LADDERS. use proper ladders or support platforms when

installing the TOPCAT enclosure. DO NOT stand on chairs, tables, or other

unsuitable surfaces.

•SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full

weight of the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling

enclosure is designed to be suspended at TWO POINTS by suspension wires

(secured to raers or other suitable building structure) and to rest LIGHTLY on

the tile grid.

The lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure, that may be suicient magnitude to

constitute a risk of electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Important Safety Instructions (cont.)

System Components and Unpacking

The standard configuration of the Redcat will contain:

Cradle Charger

and Power Supply

Flexmike

FCC ID:ORV-LSFMN

Classroom Microphone

Redcat

FCC ID:ORV-LSRCN

Receiver/Amplifier and Power

Supply

OVERVIEW

PLEASE NOTE: Redcat and any wireless components (microphones, Activate Station, Media Connector, Pods) are paired together at the factory. Please keep all

components together as a system. Moving them from one system or room to another will result in the need to re-pair them to function.

Optional Accessories

Media Connector

FCC ID:ORV-LSMCN

with power adaptor and cable

Wall Mounting

power supply bracket

Sharemike

FCC ID:ORV-LSSMN

Handheld Microphone

Security Bracket

Redcat Battery Pack

Activate System

FCC ID:ORV-LSACT

ACT-6P add-on speaker pods

For further information on Activate

for small group instruction, please

visit www.lightspeed-tek.com

OVERVIEW

Audio

Input

Audio

Output

Tone

Level

Push

StatusPower

Media Connector

PowerLink

InputOutputMic

Activate

Controls and Connections

OVERVIEW

REAR PANEL

FRONT PANEL

1. CARRYING HANDLE INSET

2. CABLE MANAGEMENT AND STRAIN RELIEF

3. WALL MOUNTING SLOTS

4. SECURITY BRACKET SLOT

5. COMPARTMENT FOR OPTIONAL BATTERY PACK

1. STATUS LIGHT: Microphone link and pair indicators

Solid white: Audio link has been established

Solid blue: Indicates fixed part mode

Alternating blue/white: Registration in process

Solid white: Indicates portable part mode

O: Unregistered or nothing linked

2. POWER LIGHT

Solid white: Indicates power on

3 3

Push

Level

Tone

Input

Power

24V/1.75A

Charge

5V/500mA

Output

Side Panel Controls and Connections

OVERVIEW

1. POWER BUTTON / VOLUME ADJUSTMENT: Press this button to turn the system power on

or o. This also functions as an adjustment knob for the volume and tone depending on the

mode selected (see 5,6,7 below).

2. TONE SELECTOR: Selects Tone as the mode for the adjustment knob (1) for the microphone.

This adjusts the bass or treble that is heard through the classroom speaker.

3. AUDIO INPUT VOLUME SELECTOR: Selects Volume as the mode for the adjustment knob (1)

for the audio sources connected to the audio input jack below.

4. AUDIO INPUT JACK: 3.5mm stereo connector for connecting to a computer or mobile device

as an audio source.

5. AUDIO OUTPUT VOLUME SELECTOR: Selects Volume as the mode for the adjustment knob

(1) for the audio device connected to the audio output jack below.

6. AUDIO OUTPUT JACK: 3.5mm stereo connector for connecting to an assisted listening

device (ALD) or to a computer for recording.

7. EXTERNAL DEVICE/POWER PORT: Charge for external device.

8. POWER: Plug the power supply (24V/1.75A) into this jack.

Flexmike Controls and Connections

1. POWER/MUTE SWITCH: Press and hold to power on, press to mute, press

and hold to power o. Blue light indicates mute, white light indicates talk.

2. MIC 1 STATUS: Lighted to indicate microphone is registered as MIC 1

Solid white: Normal operation

Flashing white: Linking in progress

3. MIC 2 STATUS: When using a second microphone, this LED is lighted to

indicate microphone is registered as MIC 2 (same behavior as MIC 1 status

light above)

4. EARBUD/MIC CONNECTION: Connect the earbud for monitoring for use

with Pods only, also for use with optional EMA (earset) and LMA (lapel)

microphones.

5. CHARGING/LOW BATTERY INDICATOR: Lights red when charging, green

when fully charged. When in operation, turns red to indicate low battery.

White, normal operation.

6. MICROPHONE VOLUME UP/DOWN

7. USB INPUT: Connect audio source to send to 975.

8. LANYARD INTERFACE: \Insert the lanyard into this hook to wear the

Flexmike.

9. BATTERY: Remove the battery to replace the rechargeable battery pack

RIGHT SIDE

LEFT SIDE

BACK

OVERVIEW

Flexmike/Sharemike Cradle Charger

DC POWER PORT:

Connect the 5V/1.0A

DC power cord here.

OVERVIEW

Altri manuali per Redcat media

Indice

Altri manuali Lightspeed Impianto stereo

Lightspeed

Lightspeed Redcat media Manuale utente

Lightspeed

Lightspeed 880iR Manuale utente

Lightspeed

Lightspeed 975 Manuale utente

Lightspeed

Lightspeed Redcat media Manuale utente

Lightspeed

Lightspeed flexcat Manuale utente

Lightspeed

Lightspeed 975 Manuale utente

Lightspeed

Lightspeed Redcat media Manuale utente

Lightspeed

Lightspeed 955Access Manuale utente

Lightspeed

Lightspeed Lightspeed Manuale utente

Lightspeed

Lightspeed 955 Access Manuale utente

Lightspeed

Lightspeed TOPCAT Manuale utente

Lightspeed

Lightspeed 820iR Manuale utente

Lightspeed

Lightspeed Mobile PA Manuale utente

Lightspeed

Lightspeed Redcat media Manuale utente

Lightspeed

Lightspeed Active Manuale utente

Lightspeed

Lightspeed TOPCAT Manuale utente

Lightspeed

Lightspeed RedcatAccess Manuale utente

Lightspeed

Lightspeed Redcat media Manuale utente

Lightspeed

Lightspeed 800 Series Manuale utente

Lightspeed

Lightspeed Mobile PA Manuale utente

Lightspeed

Lightspeed CAT 860 Manuale utente

Lightspeed

Lightspeed CAT 860 Manuale utente

Lightspeed

Lightspeed Cat 885 Manuale utente

Lightspeed

Lightspeed Redcat media Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente