Lilin CMD2182 Manuale utente
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
INSTRUCTION MANUAL
CMD2182/2186 Series
66-CMD218CSE
ATR 700TVL COLOR DOME CAMERA
CMD02182X/2186X Series
D/N ATR 700TVL VARI-FOCAL DOME CAMERA
IMPORTANT SAFEGUARDS
GRAPHIC SYMBOL EXPLANATION
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
shock to persons.
accompanying the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
CAUTION
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat
sources.
Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.
Do not cover cloth or to install this unit in poorly ventilated
places.
Do not continue to operate if there appears to be fault.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Sensitive electronics inside are vulnerable to excessive shock.
Excessive heat could damage this unit.
Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.
This may lead to overheating.
If the unit ceases to function, contact qualified service
personnel for help.
Risk of short circuit or electric shock.
Risk of fire or shock circuit.
CONGRATULATIONS
Thank you for purchasing this ATR 700TVL Color Dome Camera.
You now own one of the many fine CCTV products we
manufactured. This product has been carefully inspected under
rigid quality control and should reach you in perfect condition.
With reasonable care, it will provide years of reliable performance.
We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.
Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.
When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.
DO NOT
NSTALL OR OPERATE THIS PRODUCT
WARRANTY INFORMATION
Please complete the following product purchase information. The
factory will requests this information when contacted for technical
support, or warranty repair. It is also valuable in case of loss or
theft.
Purchase Date
Serial Number
Model Number
PART DESCRIPTION & DIMENSION
1
VIDEO OUTPUT JACK
DC POWER INPUT (DC12V 10%) JACK
DC12V (NON-POLARITY INPUT) OR AC24V POWER INPUT
BASE
FIX RING
INSIDE COVER
DOME COVER
LENS
Unit : mm
120
102
98
55
2
BRACKET
PAN
AZIMUTH
TILT
(CMD2182/2186)
OSD SETTING
PAN
AZIMUTH
TILT
(CMD2182X/2186X)
OSD SETTING
BRACKET
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
A. (UP): Push up to move the cursor upwards or to select items.
B. (LEFT): Push left to move the cursor to the left and to select or adjust
the parameters of the selected item. The parameters changes
each time this button is pushed.
C. (RIGHT): Push right to move the cursor to the right and to select or
adjust the parameters of the selected item. The parameters
changes each time this button is pushed.
D. (DOWN): Push down to move the cursor downwards or to select items.
E. SET: Press to executes selections and displays a submenu for an item
with the mark.
OSD SETTING
RIGHT
LEFT
UP
DOWN
SET
3
CONFIGURATION OF THE MENU
SETUP
MENU
LENS
SHUTTER/
AGC
AUTO
AUTO
MANUAL
MANUAL
HIGH LUMINANCE
LOW LUMINANCE
MODE SHUT+AGC
SHUTTER 1/60(1/50) 1/100(1/120) 1/250~1/10000//
AGC 6.00 12.00 18.00 24.00 30.00 36.00 42.00 44.80///////
MODE
MODE AGC OFF
/
BRIGHTNESS(000~255)
BRIGHTNESS x0.25 x0.50 x0.75 x1.00
///
AUTO IRIS
SHUT+AUTO IRIS
MODE AUTO OPEN CLOSE//
SPEED(000~255)
TYPE DC
WHITE BAL
ATR
PICT ADJUST
BACKLIGHT BLC HLC OFF
//
ATW
OFF
MIRROR OFF/ ON
B-GAIN(000~255)
B-GAIN(000~255)
LUMINANCE LOW MID HIGH
//
SPEED(000~255)
PUSH
ON
BRIGHTNESS(000~255)
CONTRAST(000~255)
SHARPNESS(000~255)
HUE(000~255)
GAIN(000~255)
R-GAIN(000~255)
R-GAIN(000~255)
CONTRAST LOW MIDLOW MID MIDHIGH HIGH
/// /
DELAY CNT(000~255)
USER 1
USER 2
ANTI CR
MANUAL LEVEL(000~255)
PUSH LOCK
ATW FRAME x0.50 x1.00 x1.50 x2.00
///
ENVIRONMENT INDOOR OUTDOOR/
4
PRIVACY OFF
AREA SEL 1/8~8/8
ON
TOP [000~244(NTSC), 000~288(PAL)]
BOTTOM [000~244(NTSC), 000~288(PAL)]
LEFT [000~474(NTSC), 000~468(PAL)]
RIGHT [000~474(NTSC), 000~468(PAL)]
COLOR(1~8)
TRANSP 0.00 0.50 0.75 1.00
///
MOSAIC OFF ON/
NR NR MODE Y/C OFF/ Y/ C
/
Y LEVEL(000~015)
C LEVEL(000~015)
CAMERA ID
SYNC INT
LANGUAGE ENGLISH// / / / /
/
DEUTSCH FRANCAIS PYCCK PORTUGUES
ESPANOL
OFF
ON
NN
^
^
CAMERA RESET
5
SETTING MENU AND FUNCTION
TO Open and Exit the Menu screen
1. Press "SET" button.
The Menu screen appears on the monitor. Check the current settings on
the menu.
2. Push or button to select the options then use or button to select a
mode.
NEXT: To the next setup menu.
BACK: Return to the previous.
RETURN: Return to the previous.
SAVE ALL: Used to save the various setting of the internal OSD menu
in the EEPROM together.
EXIT: Exit the setup menu.
SETUP MENU
AUTO
AUTO
ATW
BLC
OFF
OFF
LENS
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
ATR
PRIVACY
NEXT
EXIT SAVE ALL
SETUP MENU
OFF
INT
ENGLISH
NR
CAMERA ID
SYNC
LANGUAGE
CAMERA RESET
BACK
EXIT SAVE ALL
1. Without LENS option in the CMR2182/2186N/P .
2. Only DC mode on the TYPE option. Because a DC auto iris lens is used with the
CMD2182/2186X3.6N/P.
3. Please select AUTO mode on the SHUTTER/AGC option. If you select MANUAL
mode, the over exposure may occur.
NOTES
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Lilin Telecamera di sicurezza
Lilin
Lilin Z2R8852AX Manuale utente
Lilin
Lilin PIH-2422 Manuale utente
Lilin
Lilin PIH - 7000 Manuale utente
Lilin
Lilin IPD2322ESX Manuale utente
Lilin
Lilin IPD112ESX3 Manuale utente
Lilin
Lilin iMegapro IPR7722ESX Manuale utente
Lilin
Lilin Z2R8852AXK Manuale utente
Lilin
Lilin ImegaPro IPS6224M Manuale utente
Lilin
Lilin CMG176 Series Manuale utente
Lilin
Lilin IPR722-IVS Manuale utente
Lilin
Lilin IPS 8264 Manuale utente
Lilin
Lilin SP3034 series Manuale utente
Lilin
Lilin PIH - 7625 Manuale utente
Lilin
Lilin SP9364 Manuale utente
Lilin
Lilin MR8322 Manuale utente
Lilin
Lilin PIH-2222 Manuale utente
Lilin
Lilin PIH-8176/8178 Manuale utente
Lilin
Lilin IPR424ESX Manuale utente
Lilin
Lilin CMR7582N/P3.6 Manuale utente
Lilin
Lilin CMR6082X Manuale utente
