Linksys FGW5500 Manuale utente

Linksys 5G WiFi 6 Router

Quick Start Guide

FGW5500

5G WiFi 6 Router

LED Indicators

LED Indication

Color

Status

Description

Bottom LED -

5G/LTE/3G/Ethernet

Wan/Alarm

Blue

5G (SA/NSA) On

Device connects to 5G network

Green

LTE/3G On

Device connects to LTE/3G network

Orange

Ethernet WAN

Device connects to Internet via Ethernet WAN

Red

Alarm

System Alarm ON

• No SIM card detect

• No Internet available

• Failed to boot up system

OFF

Power OFF

Middle LED –

WiFi/WPS enabled

Blue

• LED ON for either 2.4GHz, 5GHz, or Both have been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the WiFi

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the WiFi LED color is Green.

• Blinking, WiFi WPS process, (1 sec on, 1 sec off)

Blinking

Green

Blinking

OFF

Both 2.4GHz AND 5GHz are disabled

Top LED – Voice SIP or

VoLTE enabled

Blue

• LED ON for either SIP or VoLTE has been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the Voice

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the Voice LED color is Green.

• Blinking, SMS/Missed process. (2 sec on, 2 sec off)

Blinking

Green

Blinking

OFF

Both Voice SIP AND VoLTE didn’t register

Booting

Blue

• 10 seconds initial setup on bottom LED with solid BLUE

• Then 2 mins 40 sec for LED chasing on 3 LEDs chasing with BLUE

Firmware Upgrade

Blue

All LEDs in Chasing Pattern with blue color

Reset

Blue

All LEDs in Blinking with blue color

Product Overview

○

1 Power Input

○2 Power on/off Switch

○3 2.5GbE LAN Port

○4 1GbE LAN Port

○5 USB Port (Reserve)

○

6 FXS Port

○7 WPS button

○8 SIM Slot

○9 Reset button (press 5 sec for

reset to default)

Installation

Please follow the steps below to install the router:

Step1: Insert SIM card into the router with direction shown below until it clicks.

Step2: Connect one of the LAN ports (any will do) on the router to your PC with a RJ-45 Ethernet cable

provided.

Step3: Insert the power cord into the DC-12V power jack of the router; and insert the correct plug into

your home’s power outlet.

Step4: Switch ON the power. The router will start the booting process. After a few seconds, the LED

lights will start blinking with blue color.

Step5: When the router has booted up, you will see the following LED lights on in solid color: the LTE

(Green) or 5G (Blue). You can now connect your devices to the router via Ethernet or over WiFi.

The WiFi network name SSID and Key can be found on the label underneath the router.

Note:

1. To remove the SIM card, please press the card in until it clicks, and it will pop out automatically.

2. Do not remove the SIM card when the router is operating.

Advanced Setup

If you would like to change any of the router default settings, such as the WiFi network name SSID or Key,

please access the browser on a device that is connected to the router.

Step 1. Open the Web browser and enter the default IP address of FGW5500:

https://192.168.15.1

Step 2. Enter username/password to access the web management interface.

Username: user

Password: the Password mentioned on the bottom of the unit

The page displays in your browser after logging in. You can then configure the settings by following

installation wizard accordingly.

Step 3. For more features setup, please refer to user manual on https://www.linksys.com/linksys-

support

LNKPG-00978 Rev. A00

Altri manuali per FGW5500

Indice

Altri manuali Linksys Router di rete

Linksys

Linksys EA8500-EU Manuale utente

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Manuale utente

Linksys

Linksys SLM2024 Manuale utente

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys WAG120N Manuale utente

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Manuale di istruzioni

Linksys

Linksys EA6350 Istruzioni operative e di sicurezza

Linksys

Linksys PC22224 - ProConnect II 2224 Ethernet Switch Manuale utente

Linksys

Linksys Instant PowerLine PLEBR10 Manuale utente

Linksys

Linksys HPRO200 Manuale utente

Linksys

Linksys E8400 Manuale utente

Linksys

Linksys VELOP LN1100 Series Manuale utente

Linksys

Linksys WT54GV22 Manuale utente

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manuale utente

Linksys

Linksys RVL200 Istruzioni per l’uso

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Istruzioni operative originali

Linksys

Linksys WRT54GL - Wireless-G Broadband Router... Manuale utente

Linksys

Linksys SLM2048 Manuale utente

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys E7350 Manuale utente

Linksys

Linksys MR8300 Manuale utente

Linksys

Linksys WET200 - Wireless-G Business Ethernet Bridge Manuale utente

Linksys

Linksys EF3508 Manuale utente

Linksys

Linksys EA4500 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza