Linksys WAP2000 Manuale operativo

BUSINESS SERIES

PRODUCT DATA

Model: WAP2000

Wireless-G Access Point

with Power over Ethernet

RangeBooster Wireless Access Point

Solution

The WAP2000 is a Wireless Access Point ideal for small businesses that want to

expand their existing wired networks or create new wireless networks for the

workforce or guests. It features RangeBooster technology that is compatible to

standard 802.11g but with a range up to two times farther and throughput by up to

35% faster. Unlike ordinary wireless technologies that are hampered by wireless signals

that reflect off walls, ceilings, and other objects, RangeBooster uses these multiple

signals with two smart receivers at each end (router or access point and client adapter)

to boost range and throughput speeds. As a result, a RangeBooster solution reduces or

eliminates wireless signal deadspots in offices and other buildings so users can connect

to the network in more areas. The WAP2000 comes with 3 dBi antennas for increased

power, also helping to extend the range of the Access Point.

Advanced security features like Wi-Fi Protected Access™ (WPA2 Enterprise), make this

solution ideal for your business. Integrated Quality of Service (QoS) features provide

consistent voice and video quality on both the wired and wireless networks, enabling your

workforce to communicate or view video content without disruptions and delay.

The WAP2000 can be powered from its included AC adapter or from a Power over Ethernet

(PoE) Switch via Ethernet cabling enabling mounting in ceilings or high on walls where

power outlets may not be available.

Additional features like Multiple BSSIDs, Wireless Roaming, Auto-Channel Selection, and Load

Balancing give your business added flexibility to keep employees and guests connected. The

WAP2000 also features dual firmware images so it remains functional if a firmware upgrade

process is disrupted.

Linksys Business Series WAP2000 Access Point is Linksys One Ready. That means it includes the

necessary firmware to be seamlessly integrated into a Linksys One data or data/voice network.

Once connected, a Linksys One Service Router will discover the WAP2000 device, automatically

configure it and make it available to other users on the network. Linksys One technology is

automatic and self-configuring.

Standards-based PoE (IEEE

802.3af) or External DC

power

RangeBooster technology

for up to twice the range,

reduced dead spots,

and up to 35% more

throughput than standard

802.11g.

Advanced wireless security

using Wi-Fi Protected

Access™ (WPA2) with up

to 256-bit encryption

and Support for WMM

provides improved QoS

over wireless connections

for better video and voice

performance.

Linksys One Ready for

instant integration into a

Linksys One network.

WAP2000

PRODUCT DATA

BUSINESS SERIES

Features

10BASE-T/100 BASE-TX

Ethernet Port, Autosensing

half/full duplex & MDI/MDI-X

Full backwards compatibility

with 802.11b

Easy installation and

configuration Web Interface

Dual images for resilient

firmware upgrades

Supports WEP,WPA-PSK,

WPA2-PSK,WPA-ENT, WPA2-

ENT authentication (802.11i

ready)

SMA detachable Dipole

antennae with 1x2 MIMO to

increase coverage

Supports Power over

Ethernet (PoE) or external

DC power

Supports 4 BSSID and

802.1Q VLAN to SSID

mapping

Supports SNMP and

intuitive Web-based

interface

WMM wireless QoS support

- upgradeable to 802.11e

Supports wireless roaming

based on 802.11F (IAPP)

Supports AP, Bridge Mode

and Repeater mode

Supports wireless client

isolation

Metal casing

3 year limited warranty

Linksys One Ready - Simple,

one-step automated

installation and initial

configuration

•

Wireless-G Access Point with Power over Ethernet

Specifications

Model WAP2000

Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,

IEEE802.3af (Power over Ethernet), 802.1p (QoS priority), 802.1Q (VLAN),

802.1X (Security Authentication), 802.11i - Ready (Security WPA2),

802.11e - Ready (Wireless QoS), 802.11F (Wireless Roaming)

Ports 10BASE-T/100BASE-TX Ethernet, 12VDC Power

Buttons Reset

Cabling Type UTP CAT 5

LEDs Power, PoE, Wireless, Ethernet

Operating System Linux

Setup/Config

WebUI Built-In Web UI for Easy Browser-Based Configuration (HTTP/HTTPS)

Management

SNMP Version SNMP Version 1, 2c, 3

Event Logging E-Mail Notification

Remote Syslog

Web F/W upgrade Firmware Upgradeable Through Web-Browser

Diags: Flash, etc. Diags: Flash, RAM, LAN, WLAN

DHCP DHCP Client

Operating Modes

Access Point Access Point Mode, Point-to-Point Bridge Mode,

Point-to-Multipoint Bridge Mode, Repeater Mode

Wireless

Spec/Modulation Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM

Channels Operating Channels: 11 North America, 13 Most of Europe

(ETSI and Japan)

# of Internal Ant. None

# of External Ant. 2 (Omnidirectional) 3dBi SMA Detachable

Transmit Power Transmit Power (Adjustable) @ Normal Temp Range:

11b - 18 dBm; 11g - 16 dBm

Antenna Gain in dBi 3

Receiver Sensitivity 11.g: 54Mbps@ -72dBm, 11.b: 11Mbps@ -85dBM

Security

WEP/WPA/WPA2 WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT

Access Control Wireless Connection Control: MAC-Based

SSID Broadcast SSID Broadcast Enable/Disable

802.1X IEEE 802.1X Support

Wireless Client Isolation Wireless Client Devices can be Isolated from Each Other Either Within an

SSID or Between Two SSIDs

Quality of Service

QoS 4 Queues

WMM Wireless Priority

General

Wireless Roaming based on IAPP

Load Balancing

Auto-Channel Selection

PRODUCT DATA

BUSINESS SERIES

Linksys

A Division of Cisco Systems, Inc.

121 Theory

Irvine, CA 92617 USA

E-mail: [email protected]

[email protected]

Web: www.linksys.com

Linksys products are available in more

than 50 countries, supported by

12 Linksys Regional Offices throughout

the world. For a complete list of local

Linksys Sales and Technical Support

contacts, visit our worldwide website

at www.linksys.com

Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or

and product names are trademarks or registered trademarks of their respective holders.

7081610NC-RR Model: WAP2000

Environmental

Dimensions 8.66" x 6.69" x 1.50" (220 x 170 x 38 mm)

Weight 1.69 lb (0.765 kg)

Power 12V 1A DC input, and IEEE802.3af Compliant PoE

Max Power Draw: 3.48W

Certification FCC, ICES-003, CE

Operating Temp. 14 to 131ºF (-10 to 55ºC)

Storage Temp. -22 to 158ºF (-30 to 70ºC)

Operating Humidity 10 to 90%, Noncondensing

Storage Humidity 5 to 95%, Noncondensing

Package Contents

Wireless-G Access Point with Power over Ethernet

2 x SMA Detachable Dipole Antenna (3 dBi)

User Guide on CD-ROM

Quick Installation Guide

Ethernet Network Cable

Power Adapter

Registration Card

Minimum Requirements

802.11b, 802.11g Wireless Adapter with TCP/IP Protocol Installed Per PC

Switch/Router with Power over Ethernet (PoE) Support Or PoE Injector when used with PoE

Web-Based Configuration: Java-Enabled Web Browser

•

Altri manuali per WAP2000

Indice

Altri manuali Linksys Punto di accesso wireless

Linksys

Linksys WAP11 v.2.6 Manuale utente

Linksys

Linksys WAP4400N Manuale utente

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Manuale utente

Linksys

Linksys EtherFast Instant Broadband BEFW11S4 Manuale utente

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Manuale utente

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuale utente

Linksys

Linksys WAP11 - Instant Wireless Network Access... Istruzioni operative originali

Linksys

Linksys WAP54GX Manuale operativo

Linksys

Linksys WAP54G - Wireless-G Access Point Manuale utente

Linksys

Linksys WAP4410N Manuale utente

Linksys

Linksys WAP55AG - Wireless A+G Access Point Istruzioni operative originali

Linksys

Linksys WAP55AG - Wireless A+G Access Point Manuale utente

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuale utente

Linksys

Linksys WAP54G - Wireless-G Access Point Manuale utente

Linksys

Linksys WAP54GPE - Wireless-G Exterior Access Point Manuale operativo

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuale utente

Linksys

Linksys WAP54A - Instant Wireless - Access Point Manuale utente

Linksys

Linksys WPG54G Istruzioni operative originali

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuale utente

Linksys

Linksys WAP55AG - Wireless A+G Access Point Manuale utente

Linksys

Linksys WAP2000 Manuale utente

Linksys

Linksys SPA400 Guida rapida alla configurazione

Linksys

Linksys WAP11 - Instant Wireless Network Access... Manuale utente

Linksys

Linksys WAP54A - Instant Wireless - Access Point Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente