Lippert Components SolidStep 3.0 Premium Step Manuale utente

SolidStep®3.0

Premium Step

OWNER'S MANUAL

(FOR SYSTEMS INSTALLED AFTER MAY 2019)

Rev: 07.06.21 Page 2 CCD-0004367

TABLE OF CONTENTS

Introduction 2

Safety 2

Operation 3

Release Steps 3

Storage of Steps 4

Adjust Leg extension 4

Adjust Transport Lock 4

Notes 5

Introduction

The SolidStep® 3.0 Premium Step is a trailer entry step assembly that can be mounted to the side of any

trailer, providing an ease of entry, regardless of level ground.

Additional information about this product can be obtained from lci1.com/support or the myLCI app is

available for free on Apple App Store® for iPhone® and iPad® and also on Google Play™ for Android™ users.

App Store® and iPad® are registered trademarks of Apple Inc.

Google Play™ and Android™ are trademarks of Google Inc.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/steps-support-solidstep.

NOTE: Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause

death or serious personal injury if not performed safely and within the parameters set forth in this

manual.

Failure to follow instructions provided in this manual may result in death, serious personal injury

and/or severe product and property damage, including voiding of the component warranty.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.

This manual provides general instructions. Many variables can change the circumstances of the instructions,

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This

manual cannot begin to plot out instructions for every possibility, but provides the general instructions,

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the

provided instructions may result in death, serious personal injury, severe product and/or property damage,

including voiding of the LCI limited warranty.

Rev: 07.06.21 Page 3 CCD-0004367

Always wear eye protection when performing service, maintenance or installation procedures.

Other safety equipment to consider would be hearing protection, gloves and possibly a full face

shield, depending on the nature of the task.

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth

in this manual.

Moving parts can pinch, crush or cut. Keep clear and use caution.

No repairs should be attempted by anyone other than a qualied professional. The deployment

and retraction of the step assembly can cause injury if proper precautions are not taken. The step

assembly was designed for an operational weight rating of 400 lbs.

Operation

Release Steps

1. Disengage transport lock (Fig. 1).

2. Firmly grasp and pull out the vertically-stored SolidStep® and firmly rest it on the ground.

3. Adjust leg extensions as needed, see Adjust Leg Extension section.

Fig. 1

Transport Lock

Rev: 07.06.21 Page 4 CCD-0004367

Storage of Steps

1. Retract leg extensions, if desired.

2. Lift up SolidStep® to its stored position and make sure the transport lock has been engaged.

Adjust Leg extension

The leg extension is secured with a quick release clevis pin. Adjustments can be made to the leg extensions

in 1" increments by extending or retracting the inner leg for the optimal angle and to adjust for the ground

surface angle.

1. To extend the inner leg (Fig. 2B):

A. Remove the quick-release clevis pin (Fig. 2A) from the tube and the slot in the angle.

B. Extend the inner leg to the ground and at an angle so the step treads are parallel to the ground

and level.

C. Reinsert the quick release clevis pin into the tube and slot closest to where the inner leg and tube

(Fig. 2C) meet.

2. To retract the inner leg:

A. Remove the quick-release clevis pin from the tube and slot.

B. Retract the inner leg.

C. Reinsert the quick-release clevis pin into the tube and slot.

Fig. 2

Adjust Transport Lock

1. If transport lock adjustment is required, loosen the 3 bolts (Fig.3A) on either side of the adjustable

transport lock. This allows adjustment side-to-side in the latch mechanism.

Fig. 3

Rev: 07.06.21 Page 5 CCD-0004367

2. Once the latch mechanism is in the correct position, tighten the bolts.

NOTE: To ensure control of the SolidStep, keep a firm hold on the steps while testing the functionality.

3. Once the transport lock has been adjusted, test its functionality by shaking the step assembly to

simulate road vibration.

4. Engage and disengage the transport lock (Fig.4A) to ensure the latch flanges do not scrape against the

doorframe.

Do NOT over-tighten the bolts. Over-tightening the bolts may damage the threads or cause the bolt

heads to break o.

Notes

The contents of this manual are proprietary and copyright protected by Lippert Components, Inc. (LCI).

LCI prohibits the copying or dissemination of portions of this manual unless prior written consent from an

authorized LCI representative has been provided. Any unauthorized use shall void any applicable warranty.

The information contained in this manual is subject to change without notice and at the sole discretion of LCI.

Revised editions are available for free download from lci1.com.

Please recycle all obsolete materials.

For all concerns or questions, please contact

Lippert Components, Inc.

Ph: (574) 537-8900 | Web: lci1.com | Email: [email protected]

Indice

Altri manuali Lippert Components Accessori per automobili

Lippert Components

Lippert Components Vela Manuale utente

Lippert Components

Lippert Components X-Trek Manuale utente

Lippert Components

Lippert Components Happijack FT-DR2 Manuale utente

Lippert Components

Lippert Components SOLERA SLIDER Manuale utente

Lippert Components

Lippert Components SolidStep XF Manuale utente

Lippert Components

Lippert Components Innolight Sliding Istruzioni per l'installazione

Lippert Components

Lippert Components Alumi-Tread series Manuale utente

Lippert Components

Lippert Components SURESHADE POWER BIMINI Manuale utente

Lippert Components

Lippert Components SolidStep Istruzioni per l'installazione

Lippert Components

Lippert Components 432223 Manuale utente

Lippert Components

Lippert Components Solera Power Awning Manuale per l'uso e la cura

Lippert Components

Lippert Components A-Frame Coupler Istruzioni per l'installazione

Lippert Components

Lippert Components Solera Manuale utente

Lippert Components

Lippert Components Curt Rota-Flex Pin Box Manuale utente

Lippert Components

Lippert Components Kwikee Revolution Step Series Manuale utente

Lippert Components

Lippert Components ground control TT Istruzioni per l'installazione

Lippert Components

Lippert Components ground control 3.0 Guida

Lippert Components

Lippert Components Solera Power Awning Manuale per l'uso e la cura

Lippert Components

Lippert Components Ground Control 2.0 Manuale utente

Lippert Components

Lippert Components Edge Manuale utente

Lippert Components

Lippert Components In-Wall Slide-Out Winnebago Istruzioni operative

Lippert Components

Lippert Components Sway Command Manuale

Lippert Components

Lippert Components Levelegs Manuale del proprietario

Lippert Components

Lippert Components Solera Istruzioni per l'installazione

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente