Lite-Check INSPECTOR 930 Manuale utente
LITE-CHECK INSPECTOR 930
1
INSPECTOR MODEL 930
OPERATIONS MANUAL
LITE-CHECK VEHICLE TESTER
FOR
AIR BRAKES, ELECTRICAL AND ABS
REV 1.0.1 – Feb 9, 2023
“One Tool, One Person, One Process”
®
LITE-CHECK Fleet Solutions, Inc
301 N. Havana
Spokane, WA 99202
(800) 343-8579 or (509) 535-7512
LITE-CHECK INSPECTOR 930
2
REVISION HISTORY
REVISION DATE DONE BY
Tuesday July 12 2022 Bill H.
Thursday February 9 2023 Bill H.
1.0.0
1.0.1
LITE-CHECK INSPECTOR 930
3
Contents
Cautions........................................................................................................5
Introduction..................................................................................................6
Key Features of the Inspector 930.............................................................7
Overview.......................................................................................................8
Keyboard layout...........................................................................................9
Equipment and Setup................................................................................11
LITE-CHECK INSPECTOR 930 Accessories............................................12
Set-Up Procedures.....................................................................................13
Important Reminders.................................................................................13
Operations..................................................................................................14
Reading the Digital Display..................................................................................................................................14
7-Way Pin Numbers and Circuits..........................................................................................................................16
Remote Control.....................................................................................................................................................16
Power Supply........................................................................................................................................................17
7-Way Cable Test..................................................................................................................................................18
Trailer Test Procedures..........................................................................................................................................18
Air Brake Testing..................................................................................................................................................19
Inspecting for Trailer Electrical Faults..................................................................................................................20
ABS Test Procedures..................................................................................................................................................22
Tractor Testing......................................................................................................................................................28
Appendix.....................................................................................................29
Definition of Terms...............................................................................................................................................32
Accessories............................................................................................................................................................33
Inspector Trailer Interface and Tablet Setup...........................................34
LITE-CHECK INSPECTOR 930
4
Tablet Diagnostic Mode Features.............................................................38
Lite-Check Recommended Operation Procedures.................................38
Lite-Check Cloud........................................................................................41
Troubleshooting - Trailer Interface and Tablet........................................42
Warranty, Contact and Service Information............................................44
Shipping LITE-CHECK Products..............................................................44
LITE-CHECK INSPECTOR 930
5
Cautions
ØBlock vehicle wheels from movement before releasing brakes.
ØThe antenna must be fully exposed for a clear radio signal.
ØDo not weld while the tester is connected to the trailer. The 930 tester
is grounded to the chassis and will be damaged.
ØDo not hook up electrical devices on the same trailer that the tester is
diagnosing. The tester needs a clean power supply.
ØDo not lengthen the existing power cord on the tester. Attach the
tester power cord directly to a 12-volt battery or a regulated power
supply. Lengthening the power cord will cause a power drop.
ØBe aware of voltage spikes. The tester will only operate on regulated
power. Use a 12-volt battery or LITE-CHECK 325S Regulated Power
Supply.
ØDo not charge a battery while using the tester, except mobile
installations using a vehicle alternator. Using a battery charger as a
power source will damage the tester.
ØThe tester will not operate efficiently
below 11.0 volts and will indicate “LOW
BATTERY VOLTAGE”.
ØThe tester may shut down if the voltage drops below 9.0 volts.
ØIf operating gasoline motors near the tester, be sure that they have
static suppression on the engine. Static can cause radio interference.
ØThe emergency air must be applied before the service brakes will
operate.
LITE-CHECK INSPECTOR 930
6
LITE-CHECK INSPECTOR 930
Diagnostic Tester
Introduction
The LITE-CHECK INSPECTOR 930 Diagnostic Test System will perform vital
diagnostics of electrical and air systems on both tractors and trailers. The INSPECTOR
software puts trailer ABS inspection, fault identification and troubleshooting support at
the fingertips of inspectors and mechanics. The LITE-CHECK INSPECTOR 930
provides your facility with an efficient tool for safety assurance and maintenance of your
heavy-duty fleet.
LITE-CHECK INSPECTOR 930
7
Key Features of the Inspector 930
ØRemote control operation of electrical and air systems.
ØDynamic monitoring of electrical faults.
ØMicroprocessor-driven monitoring of all 7-way circuits allows direct
identification of circuit conditions including: shorts, opens, open
grounds, and chassis shorts.
ØDigital display provides fault information at the tester. Unique audible
alarms assist in troubleshooting and repair activities at various
locations around the trailer and tractor.
ØRegulated “Service Air” for consistent brake application and inspection.
ØPerforms one-step air-systems leak testing with a built-in 60 second
timer.
ØAutomatic cable test.
Ø“One-Button ABS” feature with direct access to faults present in ABS
controllers.
LITE-CHECK INSPECTOR 930
8
Overview
The LITE-CHECK INSPECTOR 930 has the following components:
ITEM DESCRIPTION
REMOTE CCONTROL ANTENNA Antenna for use with the remote control.
BLUETOOTH ANTENNA
Antenna used with a Bluetooth enabled tablet.
DIGITAL DISPLAY Displays messages on the tester status and results.
KEYPAD See page 7 for individual buttons
ALARM SPEAKER Speaker sounds different alarms for test failure.
EMERGENCY AIR CONNECTOR Port for connecting emergency air to the tester.
SERVICE AIR CONNECTOR Port for connecting Service air to the tester.
7-WAY CABLE SOCKET Cable socket for 7-way cable
SIDE 7-WAY CABLE SOCKET Cable socket for 7-way cable. (Used for cable testing)
ALARM SPEAKER
KEYPAD
EMERGENCY AIR CONNECTOR SERVICE AIR CONNECTOR
7-WAY CABLE SOCKET
DIGITAL DISPLAY
REMOTE CONTROL ANTENNA BLUETOOTH ANTENNA
SIDE 7-WAY SOCKET
LITE-CHECK INSPECTOR 930
9
The chart below provides a brief description of each button on the keyboard panel and
on the remote control.
Keyboard layout
Graphic Panel Button Remote Button Function
EMER EMER
Operates emergency
air
SERVICE SERVICE
Operates service air (if
emergency is
pressurized)
AIR LEAK TEST AIR LEAK TEST
Blocks air source for
vehicle air leak
BRAKE BRAKE
Operates brake
electrical circuit
MARKER MARKER
Operates marker
(clearance) circuit
AUXIL AUXIL
Operates auxiliary
circuit (ABS power)
LEFT LEFT
Operates Left turn
circuit
TAIL TAIL Operates tail circuit
EMER
SERVIC
AIR
LEAK
TEST
BRAKE
MARKER
AUX
LEFT
TAIL
LITE-CHECK INSPECTOR 930
10
Graphic Panel Button Remote Button Function
RIGHT RIGHT
Operates right turn
circuit
ABS BACK ABS BACK
ABS Test - Initiates the
ABS test routine (30 to
45 seconds)
SELECT* HELP SELECT* HELP
ABS Select - Enter
selected option or view
on screen
DOWN DOWN
Moves display cursor
down
UP UP
Moves display cursor
up
(NO TEXT) N/A
Non Functional - for
future use
ALARM MUTE N/A
Turns alarm off during
electrical test
TRACTOR
OUTPUT/CABLE TEST
N/A
Tractor output test/
cable test
RIGHT
ABS
BACK
SELECT
HELP
DOWN
UP
ALARM
MUTE
TRACTOR
OUTPUT
TEST
CABLE TEST
Multiple circuits can be activated at the same time by using the “SELECT” button
on the tester or on the remote. In this mode, multiple circuits can be switched on
and off, with the display indicating the total current draw of all the circuits. Pressing
the “SELECT” button once again will exit this mode.
*SELECT Detail:
Indice
Altri manuali Lite-Check Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
