LSIS XBC-DR20SU Manuale utente

BEHA OTOMASYON

PLC XGB-XBC SERİLERİ

KULLANIM KILAVUZU

www.behaotomasyon.com

Right choice for ultimate yield

LSIS strives to maximize customers' profit in gratitude of choosing us for your partner.

Programmable Logic Controller

XBC Standard/Economic Type Main Unit

User’s Manual



Read this manual carefully before

installing, wiring, operating, servicing

or inspecting this equipment.

Keep this manual within easy reach

for quick reference.

XBC-DR10E

XBC-DN10E

XBC-DP10E

XBC-DR14E

XBC-DN14E

XBC-DP14E

XBC-DR20E

XBC-DN20E

XBC-DP20E

XBC-DR30E

XBC-DN30E

XBC-DP30E

XGT Series

http://eng.lsis.biz

Main unit

XBC-DR20SU

XBC-DN20S(U)

XBC-DP20SU

XBC-DR30SU

XBC-DN30S(U)

XBC-DP30SU

XBC-DR40SU

XBC-DN40SU

XBC-DP40SU

XBC-DR60SU

XBC-DN60SU

XBC-DP60SU

www.behaotomasyon.com

Safety Instruction

Before using the product …

For your safety and effective operation, please read the safety instructions

thoroughly before using the product.

►Safety Instructions should always be observed in order to prevent accident

or risk with the safe and proper use the product.

►Instructions are separated into “Warning”and “Caution”, and the meaning of

the terms is as follows;

This symbol indicates the possibility of serious injury

or death if some applicable instruction is violated

This symbol indicates the possibility of slight injury

or damage to products if some applicable instruction

is violated

►The marks displayed on the product and in the user’s manual have the

following meanings.

Be careful! Danger may be expected.

Be careful! Electric shock may occur.

►The user’s manual even after read shall be kept available and accessible to

any user of the product.

Warning

Caution

www.behaotomasyon.com

Safety Instruction

Safety Instructions when designing

Please, install protection circuit on the exterior of PLC to protect

the whole control system from any error in external power or PLC

module. Any abnormal output or operation may cause serious problem

in safety of the whole system.

- Install applicable protection unit on the exterior of PLC to protect

the system from physical damage such as emergent stop switch,

protection circuit, the upper/lowest limit switch, forward/reverse

operation interlock circuit, etc.

- If any system error (watch-dog timer error, module installation error,

etc.) is detected during CPU operation in PLC, the whole output is

designed to be turned off and stopped for system safety. However,

in case CPU error if caused on output device itself such as relay or

TR can not be detected, the output may be kept on, which may

cause serious problems. Thus, you are recommended to install an

addition circuit to monitor the output status.

Never connect the overload than rated to the output module nor

allow the output circuit to have a short circuit, which may cause a

fire.

Never let the external power of the output circuit be designed to

be On earlier than PLC power, which may cause abnormal output or

operation.

In case of data exchange between computer or other external

equipment and PLC through communication or any operation of

PLC (e.g. operation mode change), please install interlock in the

sequence program to protect the system from any error. If not, it

may cause abnormal output or operation.

Warning

www.behaotomasyon.com

Safety Instruction

Safety Instructions when designing

I/O signal or communication line shall be wired at least 100mm

away from a high-voltage cable or power line. If not, it may cause

abnormal output or operation.

Caution

Use PLC only in the environment specified in PLC manual or

general standard of data sheet. If not, electric shock, fire, abnormal

operation of the product or flames may be caused.

Before installing the module, be sure PLC power is off. If not,

electric shock or damage on the product may be caused.

Be sure that each module of PLC is correctly secured. If the

product is installed loosely or incorrectly, abnormal operation, error or

dropping may be caused.

Be sure that I/O or extension connecter is correctly secured. If

not, electric shock, fire or abnormal operation may be caused.

If lots of vibration is expected in the installation environment,

don’t let PLC directly vibrated. Electric shock, fire or abnormal

operation may be caused.

Don’t let any metallic foreign materials inside the product, which

may cause electric shock, fire or abnormal operation..

Caution

www.behaotomasyon.com

Safety Instruction

Safety Instructions when wiring

Prior to wiring, be sure that power of PLC and external power is

turned off. If not, electric shock or damage on the product may be

caused.

Before PLC system is powered on, be sure that all the covers of

the terminal are securely closed. If not, electric shock may be caused

Warning

Let the wiring installed correctly after checking the voltage rated

of each product and the arrangement of terminals. If not, fire,

electric shock or abnormal operation may be caused.

Secure the screws of terminals tightly with specified torque when

wiring. If the screws of terminals get loose, short circuit, fire or abnormal

operation may be caused.

Surely use the ground wire of Class 3 for FG terminals, which is

exclusively used for PLC. If the terminals not grounded correctly,

abnormal operation may be caused.

Don’t let any foreign materials such as wiring waste inside the

module while wiring, which may cause fire, damage on the product

or abnormal operation.

Caution

www.behaotomasyon.com

Safety Instruction

Safety Instructions for test-operation or repair

Safety Instructions for waste disposal

Don’t touch the terminal when powered. Electric shock or abnormal

operation may occur.

Prior to cleaning or tightening the terminal screws, let all the

external power off including PLC power. If not, electric shock or

abnormal operation may occur.

Don’t let the battery recharged, disassembled, heated, short or

soldered. Heat, explosion or ignition may cause injuries or fire.

Warning

Don’t remove PCB from the module case nor remodel the module.

Fire, electric shock or abnormal operation may occur.

Prior to installing or disassembling the module, let all the external

power off including PLC power. If not, electric shock or abnormal

operation may occur.

Keep any wireless installations or cell phone at least 30cm away

from PLC. If not, abnormal operation may be caused.

Caution

Product or battery waste shall be processed as industrial waste.

The waste may discharge toxic materials or explode itself.

Caution

www.behaotomasyon.com

Revision History

ersion

Date Remark Page

V 1.0 2010.3 1. First Edition -

V 1.1 2010.12

1. XGB output module added

(XBC-RY08B, XBE-DC16B)

2. Error fixed

3. Sequence diagram on troubleshooting fixed

V 1.2 2010.12

1. XGB SU type added

(XBC-DN20SU, XBC-DN30SU)

2. RTC option board added (XBO-RTCA)

Chapter 9

V 1.3 2011.06

1. XGB SU type added

(XBC-DN40SU, XBC-DN60SU, XBC-DR40SU, XBC-DR60SU)

2. XGB option module added

(XBO-DC04A, XBC-TN04A, XBO-M2MB)

Ch10, Ch11,

Ch12

V1.4 2012.01

1. XGB E type added

(XBC-DN10E, XBC-DN14E, XBC-DN20E, XBC-DN30E,

XBC-DP10E, XBC-DP14E, XBC-DP20E, XBC-DP30E)

V1.5 2013.01

1. XGB SU type added

(XBC-DP20SU, XBC-DP30SU, XBC-DP40SU, XBC-DP60SU)

2. Data Backup time modified

4-14

※The number of User’s manual is indicated the right side of the back cover.

www.behaotomasyon.com

About User’s Manual

Congratulations on purchasing PLC of LSIS Co.,Ltd.

Before use, make sure to carefully read and understand the User’s Manual about the functions,

performances, installation and programming of the product you purchased in order for correct use and

importantly, let the end user and maintenance administrator to be provided with the User’s Manual.

The Use’s Manual describes the product. If necessary, you may refer to the following description and order

accordingly. In addition, you may connect our website(http://eng.lsis.biz/) and download the information as a

PDF file.

Relevant User’s Manual

Title

Description

No. of User

Manual

XG5000 User’s

Manual

It describes how to use XG5000 software especially about

online functions such as programming, printing, monitoring

and debugging by using XGT series products.

10310000512

XGK/XGB Series

Instruction &

Programming

It describes how to use the instructions for programming

using XGK/XGB series.

10310000510

XGB Analog

User’s Manual

It describes how to use the specification of analog

input/analog output/temperature input module, system

configuration and built-in PID control for XGB main unit.

10310000920

XGB Cnet I/F

User’s Manual

It describes how to use built-in communication function for

XGB main unit and external Cnet I/F module.

10310000816

XGB Fast Ethernet I/F

User’s Manual

It describes how to use XGB FEnet I/F module.

10310000873

www.behaotomasyon.com

◎Contents ◎

Chapter 1 Introduction .............................................................................................1-1~1-5

1.1 Guide to Use This Manual.............................................................................................1-1

1.2 Features ........................................................................................................................1-2

1.3 Terminology...................................................................................................................1-4

Chapter 2 System Configuration............................................................................... 2-1~2-14

2.1 XGB System Configuration .........................................................................................2-1

2.2 Product List ..................................................................................................................2-3

2.3 Classification and Type of Product Name ...................................................................2-5

2.3.1 Classification and type of basic unit .........................................................................2-5

2.3.2 Classification and type of expansion module ...........................................................2-7

2.3.3 Classification and type of special module ................................................................2-8

2.3.4 Classification and type of communication module.....................................................2-9

2.4 System Configuration ................................................................................................2-11

2.4.1 Cnet I/F system........................................................................................................2-11

2.4.2 Ethernet system .......................................................................................................2-14

Chapter 3 General Specifications ......................................................................................3-1

3.1 General Specifications ..................................................................................................3-1

Chapter 4 CPU Specifications................................................................................... 4-1~4-14

4.1 Performance Specifications .........................................................................................4-1

4.2 Names of Part and Function ........................................................................................4-7

4.3 Power Supply Specifications .....................................................................................4-10

4.4 Calculating Example of Consumption Current/Voltage .............................................4-13

4.5 Data Backup Time .....................................................................................................4-14

www.behaotomasyon.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LSIS Controllori

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente

3M MicroTouch EX113 Manuale utente