Lucent Stinger Manuale utente
Stinger®
ADSL 24-Port Line Interface Module (LIM) Guide
For software version 9.2-167
December 2001
Lucent Technologies
Copyright © 2000, 2001 Lucent Technologies Inc. All rights reserved.
This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in any fashion by any
entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or licensing, without the express
written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to [email protected].
Notice
Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is subject to change.
European Community (EC) RTTE Compliance
Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential requirements and other
relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE)
Directive 1999/5/EC.
To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation library at
http://www.lucentdocs.com/ins.
Safety, Compliance, and Warranty Information
Before handling any Lucent Access Networks hardware product, read the Edge Access Safety and Compliance Guide included in your product package. See
that guide also to determine how products comply with the electromagnetic interference (EMI) and network compatibility requirements of your country. See
the warranty card included in your product package for the limited warranty that Lucent Technologies provides for its products.
Security Statement
In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.
Trademarks
Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other brand and
product names are trademarks of their respective holders.
Ordering Information
You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.
Feedback
Lucent Technologies appreciates customer comments about this manual. Please send them to [email protected].
Stinger® ADSL 24-Port LIM Guide iii
Customer Service
Product and service information, and software upgrades, are available 24 hours a day.
Technical assistance options accommodate varying levels of urgency.
Finding information and software
To obtain software upgrades, release notes, and addenda for this product, log in to Lucent
OnLine Customer Support at http://www.lucent.com/support.
Lucent OnLine Customer Support also provides technical information, product information,
and descriptions of available services. The site is open 24 hours a day, seven days a week. Log
in and select a service.
Obtaining technical assistance
The Lucent OnLine Customer Support at http://www.lucent.com/support
provides easy access to technical support. You can obtain technical assistance through email or
the Internet, or by telephone. If you need assistance, make sure that you have the following
information available:
•Active service or maintenance contract number, entitlement ID, or site ID
•Product name, model, and serial number
•Software version
•Software and hardware options
•If supplied by your carrier, service profile identifiers (SPIDs) associated with your line
•Your local telephone company’s switch type and operating mode, such as AT&T 5ESS
Custom or Northern Telecom National ISDN-1
•Whether you are routing or bridging with your Lucent product
•Type of computer you are using
•Description of the problem
Obtaining assistance through email or the Internet
If your services agreement allows, you can communicate directly with a technical engineer
through Email Technical Support or a Live Chat. Select one of these sites when you log in to
http://www.lucent.com/support.
Calling the technical assistance center (TAC)
If you cannot find an answer through the tools and information of Lucent OnLine Customer
Support or if you have a very urgent need, contact TAC. Access Lucent OnLine Customer
Support at http://www.lucent.com/support and click Contact Us for a list of
telephone numbers inside and outside the United States.
Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North America for
a menu of Lucent services. Or call +1 510-769-6001 for an operator. If you do not have an
active services agreement or contract, you will be charged for time and materials.
Stinger®ADSL 24-Port LIM Guide v
Contents
Customer Service..................................................................................................................... iii
About This Guide.............................................................................. xi
What is in this guide.................................................................................................................. xi
What you should know ............................................................................................................. xi
Documentation conventions...................................................................................................... xi
Stinger documentation set.......................................................................................................xii
Chapter 1 Configuring an ADSL 24-Port Line Interface Module (LIM)......... 1-1
Installing an ADSL 24-port LIM .......................................................................................... 1-1
Module specifications ............................................................................................................ 1-2
Status indicators..................................................................................................................... 1-2
Interpreting ADSL 24-port LIM status lights................................................................. 1-4
Configuring ATM ADSL-DMT interfaces............................................................................ 1-4
Overview of the AL-DMT profile parameters................................................................ 1-5
ADSL protocol support................................................................................................... 1-5
Line activation and DMT parameters............................................................................. 1-6
Rate-adaptive mode parameters...................................................................................... 1-8
Power-level parameters and Power Spectral Density (PSD).......................................... 1-9
Fast and interleaved bit-rate parameters....................................................................... 1-10
Interleaving delay parameters....................................................................................... 1-12
Noise margin parameters.............................................................................................. 1-12
Dynamic rate-adaptive noise margin parameters.......................................................... 1-14
Configuring call-control....................................................................................................... 1-15
Modifying call control to support dual latency.................................................................... 1-17
Provisioning a dual latency deployment....................................................................... 1-17
Examples of ADSL-DMT interface configuration .............................................................. 1-21
Checking status of ADSL-DMT interface ........................................................................... 1-22
Checking status of the physical interface ..................................................................... 1-23
Displaying ADSL-DMT port status and nailed groups ................................................ 1-25
Obtaining statistics about operations............................................................................ 1-25
Chapter 2 Configuring LIM and LIM Port Redundancy................................. 2-1
Overview of LIM and LIM port redundancy......................................................................... 2-1
Configuring LIM redundancy................................................................................................ 2-1
Overview of the LIM-Sparing-Config profile ................................................................ 2-2
Manual LIM redundancy................................................................................................ 2-4
Automatic LIM redundancy............................................................................................ 2-4
LIM redundancy with IRMs and LPM-Rs...................................................................... 2-7
Checking LIM redundancy status................................................................................... 2-8
Checking status with the Rearslot command.................................................................. 2-9
vi Stinger®ADSL 24-Port LIM Guide
Contents
Configuring LIM port redundancy....................................................................................... 2-10
Enabling LIM port redundancy..................................................................................... 2-11
Manual LIM port redundancy....................................................................................... 2-12
Automatic LIM port redundancy.................................................................................. 2-12
Checking the status of extended LIM port redundancy................................................ 2-13
Stinger®ADSL 24-Port LIM Guide vii
Figures
Figure 1-1 ADSL 24-port LIM....................................................................................... 1-3
Figure 1-2 Relationship between noise margin parameters and power adjustments.... 1-12
Figure 1-3 Future support: Noise margins and dynamic rate adaptation relationship . 1-14
Figure 1-4 ADSL ATM LIM configuration................................................................. 1-21
Figure 2-1 LIM redundancy in a Stinger FS unit........................................................... 2-2
Figure 2-2 LIM port redundancy on a Stinger FS unit................................................. 2-11
Altri manuali per Stinger
1
Indice
Altri manuali Lucent Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
