Lund Interceptor Manuale utente

Grill mounting nuts

I-819A

Thank you for purchasing a LUND accessory; designed, engineered and built specifically for your vehicle. We have made

every effort to ensure that this hood deflector is top quality in terms of fit, durability, finish and ease of installation.

®

™

Package Contains: 1 Shield Tools Needed: 8mm (5/16”) socket and ratchet

Applications: Dodge Ram, Dodge Dakota

Installation Instructions

Please read carefully and completely before starting.

1. Clean hood of vehicle using hot soapy water, rinse

and dry thoroughly.

RAM: grill support mounts

2. RAM: Open hood and loosen the grill mounting nuts and

the grill support mounting screws. Allow 1/4” to 3/8” gap

between hood and grill.

DAKOTA: Open hood and remove the grill mounting nuts.

Allow 1/4” to 3/8” gap between hood and grill.

3. RAM, DAKOTA: Gently slide shield between hood and grill.

Make sure that the shield is centered left to right on the hood.

4. RAM: Tighten the grill mounting nuts and grill support mount

screws. (NOTE: adjustment of the grill support may be required

to ensure even spacing between the grill and fender. This

adjustment is required for proper fit of the Lund fender shields.)

DAKOTA: Reinstall and tighten grill mounting nuts.

5. RAM, DAKOTA: Inspect fit to make sure shield is aligned

properly with grill. Loosen grill mounts and adjust shield

placement if necessary.

RAM: adjust for even spacing

Proper Alignment

I-819A

®

™

Care & Cleaning

1. Avoid the use of automatic “brush-style” car washes.

2. Do not use cleaning solvents of any kind.

3. To wash, use only a mild soap and dry with a clean cloth or sponge.

4. Do not pull on shield to close the hood.

If painting of the shield is desired:

CHECK FIT BEFORE PAINTING. LUND WILL NOT WARRANT PAINTING ON MISFITTING SHIELDS

1. Prep shield by cleaning with mild soap and water, rinse and dry thoroughly.

DO NOT USE ANY SOLVENTS TO PREP SHIELD!

2. Use only an Acrylic Based Enamel.

3. Apply several light coats of paint as opposed to one thick coat.

4. Let dry for 24 hours.

Altri manuali per Interceptor

7

Altri manuali Lund Accessori per automobili

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente