Lynx CPS Series Manuale utente
USER MANUAL
Lynx Pro Audio S.L.
CPS series
CPS-214
CPS-18S
V.23.06
Manufacturer
CE CERTIFICACTION, EUROPEAN PRODUCT
CPS-214
LYNX Pro Audio S.L.
Calle 1 - Pol. Ind. Picassent
E-46220 Picassent (Valencia)
This user guide is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly
prohibited. Copyright 2020. All rights reserved.
CPS-18S
CPS Series User Manual
Lynx Pro Audio S.L 3www.lynxproaudio.com
INTRODUCTION
This manual describes the recommended installation procedure for the coaxial point source CPS-214 in
combination with the subwoofer CPS-18S.
The CPS (Coaxial Point Source) Series is our new high power, point source system.
There is one full range cabinet available, CPS-214 together with one sub-bass unit, CPS-18S. Extreme care
has been taken to select and customize the most advanced components on the market, including coaxial
Mid/high drivers together with full electronic synergy through the coupling of the system amplication &
integrated DSP technology.
Total system control is also achieved through our 3D prediction software (Rainbow 3D) working together
with our remote system management platform (OCS). These cutting edge softwares together with the CPS
technology provides the most optimum and precise listening experience to every ear in the audience.
CONTENTS
• SAFETY PRECAUTIONS 4
• SYSTEM OVERVIEW
CPS-214 5
CPS-18S 6
BACK PANEL 7
CONNECTORS AND CONNECTIONS 9
• CONFIGURING THE DIGITAL SIGNAL PROCESSOR 10
• ONLINE CONTROL SYSTEM 12
• RAINBOW 3D ACOUSTIC SIMULATION SOFTWARE 13
• HARDWARE AND ACCESSORIES 14
• CABINET INSTALLATION 15
• HOW TO USE THE FLYING FRAME SV-CPS 17
• HOW TO USE THE TRANSPORT DOLLY 20
• HOW TO USE THE UBRACKET FOR HORIZONTAL MOUNTING 22
• HOW TO USE THE UBRACKET FOR VERTICAL MOUNTING 25
• APPLICATION EXAMPLES FOR CPS-214 AND CPS-18S 28
• CERTIFICATIONS AND GUARANTEE 30
CPS Series User Manual
Lynx Pro Audio S.L 4www.lynxproaudio.com
Before starting to use this device, please read this instruction manual carefully.
Keep these instructions in the place where the equipment will be used and with easy access to them.
• Electrical appliance
The exclamation mark within a triangle identies the presence of electricity. Use the system carefully without
wet hands or feet. Avoid installing the speaker in wet or excesivelly humid places. Do not place material that
contains liquid on or near the unit. Avoid dripping or splashing water or any liquid over the unit. Regularly check
the condition of the cables and make sure these are not being walked on or pinched. Connect the speaker to
bipolar, earthed mains. The mains plug must be connected to the appropriate protection (fuse or breaker).
Connection to any other type of mains could result in an electrical shock and violate local electrical codes.
CAUTION: DO NOT CONNECT OR DISCONNECT THE AC POWER CONNECTORS UNDER LOAD.
•Heavy equipment
Apply back protection when using the system. Avoid loading and unloading at heights.
•Electrical shock risk
The diagonal mark within a triangle identies the presence of dangerous voltage.
Do not open or handle the interior of the box. These parts are not to be adjusted by the user. For maintenance
and/or repair please go to an authorized service centre.In order to reduce the risk of electric shock, disconnect
from AC before plug in or unplugging Audio signal cables. Reconnect to AC only if all signal connections are
made and secured. Never manipulate the ground type plug provided.
The AC mains plugs should always remain accessible for operation.
Unplug the loudspeaker during storms or when it’s being used for a long time.
•Hearing damage risk
These systems can reproduce large quantities of sound pressure which can damage hearing. Take precautions
if you are going to be near them for extended amounts of time and do not get too close.
•Hanging / Flying
Do not hang the cabinets from the handles or from any other part other than the designated hanging point.
When ying this system please observe the technical and “Rainbow” software data carefully. Never exceed
the maximum safe working loads or ignore the instructions included within this manual. Use Only ying
accessories provided by Lynx Pro Audio S.L. Rigging must be always carried out by professionals.
•Delicate Material
Please ensure no foreign object or water enters the speaker. Only clean the unit with dry cloths. Do not use solvents.
•Overheating / Fire risk
To reduce the risk of the speaker over heating, avoid direct contact with sunlight. Avoid placing the unit close
to heat inducing objects such as radiators. Do not cover the equipment in use and do not block any ventilation
openings. Do not put naked ame, such as lighted candles, close or on top of the unit.
•Electromagnetic and interferente emissions
Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile phones, lap
tops, magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)
EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.
•IMPORTANT NOTE
This Equipment must be used in accordance with these instructions and by trained professional personnel
only. This equipment should not be used in places with extreme tropical climates. Don’t expose this apparatus
to extreme humidity and or temperature values.
CPS Series User Manual
Lynx Pro Audio S.L 5www.lynxproaudio.com
SYSTEM OVERVIEW
• Technical Data:
Components:
• LF: 2 x 14” (4” voice coil), neodymium magnet, 2000W (AES)
• MF/HF: MF: 3.5” (90 mm) voice coil, 150W (AES)
HF: 1.5” (44,4 mm) voice coil, 80W (AES)
Frequency range: 55 Hz – 22 KHz (-6dB)
Max SPL / Peak: Low: 137 dB / 143 dB - Mid/ High: 139.5 dB / 142.6 dB
Coverage angle: Rotatable 60ºH x 40ºV
Power amplier: 6000 W Class D with switching power supply & PFC
Amp: 3000W @4 Ohm
MF/HF Amp: 3000 W @4 Ohm
Processing: 96 KHz / 64 bit double-precision, DSP with FIR lter linear phase
Crossover: Digital: FIR lter 550 Hz / Passive: 6.3 KHz
Control: User control interface with 2.8” IPS screen and multifunction joystick controller
Control connections: USB (DSP programming) / Dual Ethernet port
Input: BAL/UNBAL XLR connectors analog input
AES/EBU digital input optional
Nominal voltage: 100 – 240V AC @ 50-60 Hz
Operating voltage: 85 – 264V AC
AC Connectors: 16A Neutrik powerCON TRUE1 TOP with looping output
Finish: Polyurea coating, high grade resistant paint
Material: 18 mm Premium birch plywood
Dimensions: 900 x 420 x 515 mm (H x W x D)
Weight: 49 Kg (108 lbs)
•CPS-214
Extremely compact & powerful 3-way, self-powered (6000 W Class-D with PFC), DSP integrated
coaxial point source element. Dual high power 14” neodymium transducers and a unique 2” Exit throat
(HF 1.75” voice coil/ MF 3.5” voice coil) coaxial neodymium compression driver.
• CPS-214 measurements
CPS Series User Manual
Lynx Pro Audio S.L 6www.lynxproaudio.com
• CPS-18S
CPS-18S is a compact & extremely powerful, self-powered (3000W Class-D with PFC), DSP integrated
subwoofer unit in 6th order band pass conguration. 18” (4” voice coil). Max SPL 138 dB.
• Technical Data:
Components:
• LF: LF: 1 x 18” (4” QUATTRO in/out copper voice coil), waterproof cone with
treatment for both sides
Frequency range: 35 Hz – 100 Hz (-6dB)
Max SPL / Peak: 132 dB / 138 dB
Coverage: QUASI Omnidirectional
Power amplier: 3000 W Class D with switching power supply & PFC
Processing: 96 KHz / 64 bit double-precision, DSP with FIR lter linear phase
Conguration: 6th Order Band Pass Subwoofer
Control: User control interface with 2.8” IPS screen and multifunction joystick controller
Control connections: USB (DSP programming) / Dual Ethernet port
Input: BAL/UNBAL XLR connectors analog input
AES/EBU digital input optional
Nominal voltage: 100 – 240V AC @ 50-60 Hz
Operating voltage: 85 – 264V AC
AC Connectors: 16A Neutrik powerCON TRUE1 TOP with looping output
Finish: Polyurea coating, high grade resistant paint
Material: 15 mm Premium birch plywood
Dimensions: 600 x 900 x 750 mm (H x W x D)
Weight: 62 Kg (136.6 lbs)
• CPS-18S measurements
CPS Series User Manual
Lynx Pro Audio S.L 7www.lynxproaudio.com
CPS BACK PANEL panel
CPS-214 back panel:
IPS display &
digital control
digital
INPUT
Ethernet
USB
connection
Multifunction
joystick control
digital
Through
analog
INPUT
analog
Through
Main Link
Main input
CPS Series User Manual
Lynx Pro Audio S.L 8www.lynxproaudio.com
CPS BACK PANEL panel
CPS-18S back panel:
IPS display &
digital control
digital
INPUT
Ethernet
USB
connection
Multifunction
joystick control
digital
Through
analog
INPUT
analog
Through
Main Link
Main input
CPS Series User Manual
Lynx Pro Audio S.L 9www.lynxproaudio.com
XLR AEREAL CONNECTORS
OUTPUTS
1.- EARTH
2.- LIVE (+)
3.- LIVE (-)
INPUTS
1.- EARTH
2.- LIVE (+)
3.- LIVE (-)
XLR SOCKET CONNECTORS
CONNECTORS AND CONNECTIONS
SOCKET POWERCON TRUE1
CAUTION: Do not connect
or disconnect the AC Power
connectors under load.
NAC3FX-W
NAC3MX-W
CPS Series User Manual
Lynx Pro Audio S.L 10www.lynxproaudio.com
FIR FILTERS
Finite Impulse Response (FIR) lters are used in the signal processing of the cabinets. FIR is a type of digital lter with
linear phase characteristics. This frees system designers from the constraints of phase anomalies associated with
analogue lters or their digital versions (IIR, Innite Impulse Response). When properly used, FIR ltering can audibly
improve a system’s impulse response and reduce crossover interference.
CONFIGURING THE CABINET DSP OPTIONS
On the back pannel of the cabinet you will nd the digital control area. From the compact joystick located below the
screen you are able to congure the Basic adjustment functions of the internal DSP. Just move the joystick to select
the icons on the left of the screen. You can enter into the following functions:
Please note that you must apply the desired conguration in each one cabinet and requires electrical power to work.
If changes are not made the display will automatically dim to avoid unnecessary light in situations where light is not
wanted. To re-activate the light simply press the joystick.
CONFIGURATION PANEL
On the main screen you can see the cabinet’s input and output.
• Input:
You can see a vumeter with the input level and a clip signal.
• Output:
You have a vumeter with the output level (0 dBu is the amp’s
maximum level) You can check the compressor and control the
dynamic activity.
On the second screen you can modify some parameters.
• Gain
• Mute
• Polarity
• Delay
• High Pass Filter: You can setup a High Pass lter selecting
type, frequency and order.
Home Settings Folder Conguration Information
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Lynx Altoparlanti
Lynx
Lynx KR Series Manuale utente
Lynx
Lynx pro-audio GR-18S Manuale utente
Lynx
Lynx ADP-15M Manuale utente
Lynx
Lynx Ionic Series Manuale utente
Lynx
Lynx GR-12 Manuale utente
Lynx
Lynx Ionic Series Manuale utente
Lynx
Lynx CPS-210 Manuale utente
Lynx
Lynx LX-V8 Manuale utente
Lynx
Lynx LX-212S Manuale utente
Lynx
Lynx Ionic Series Manuale utente
