M-system R5 Series Manuale utente

R5 Series Remote I/O

R5X PC CONFIGURATOR

Model: R5CON

Users Manual

http://www.m-system.co.jp/

5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPA N

Te l: +81-6-6659-8201 Fax: +81-6-6659-8510

E-mail: info@m-system.co.jp

2R5CON USERS MANUAL EM-9272 Rev.10

CONTENTS

1. GENERAL .............................................................................................3

1.1. FEATURES OF R5CON .....................................................................................................3

1.2. HARDWARE REQUIREMENTS.........................................................................................3

1.3. INSTALLING THE R5CON .................................................................................................3

1.4. UNINSTALLING THE R5CON ............................................................................................4

2. BASIC OPERATIONS ...........................................................................5

2.1. STARTING / QUITTING THE R5CON ................................................................................5

2.2. VIEW COMPONENTS AND FUNCTIONS .........................................................................6

2.3. CONNECTING/DISCONNECTING THE COMMUNICATION LINE....................................8

3. VIEWS & FUNCTIONS PARTICULAR TO MODULES .........................9

3.1. ANALOG I/O MODULE ......................................................................................................9

3.2. THERMOCOUPLE & RTD INPUT MODULE ................................................................... 10

3.3. CT & PT : AC CURRENT / VOLTAGE INPUT MODULE................................................... 11

3.4. DISCRETE INPUT MODULE ...........................................................................................12

3.5. DISCRETE OUTPUT MODULE .......................................................................................12

3.6. TOTALIZED PULSE I/O MODULE.................................................................................... 13

4. NETWORK MODULE..........................................................................14

4.1. ETHERNET SETTINGS ................................................................................................... 14

4.2. COMMUNICATION TIMEOUT .......................................................................................... 14

5. SAVING & READING PARAMETERS ................................................15

5.1. SAVING PARAMETERS ...................................................................................................15

5.2. READING PARAMETERS................................................................................................ 15

3R5CON USERS MANUAL EM-9272 Rev.10

1. GENERAL

In this manual, user is assumed that he/she is already familiar with operating Windows 7 or Windows 10 and terminology

used in these operating systems.

If you need to know about particular operation or terminology on Windows, please refer to manuals provided with the system.

1.1 FEATURES OF R5CON

The R5 Series are isolated, modular I/Os with open ﬁeld networking capabilities, such for DeviceNet and Proﬁbus. These

network modules can be directly connected to a Windows PC via PC Conﬁgurator Cable.

The R5CON software is used to help you program various parameters such as I/O scaling, zero/span adjustments to match

the users’ needs.

General functions of the R5CON are as follows:

■PARAMETERS CONFIGURATION FOR EACH CHANNEL

I/O range scaling and zero/span adjustments are available for each I/O module.

For temperature input modules, actual temperature range can be also programmed per each command.

For T/C input of the model R5(T)-TS (Ver 1.00 or higher), overrange limits (0% and 100% of the scaled range) can be applied.

When the input goes below 0% or above 100%, 0% and 100% data respectively are sent to the host PLC or PC.

■FILE MANAGING

The parameter conﬁguration for each module can be saved as a ﬁle on the PC. Therefore, you can conﬁgure a set of param-

eters without actually connecting the R5x to your PC.

Reading (downloading) parameter ﬁles to the network module and each I/O module helps you to conﬁgure multiple modules

easily and accurately.

■MONITORING

You can check analog I/O data using conﬁgured data.

For discrete I/O modules, ON/OFF status of each channel can be monitored.

1.2 HARDWARE REQUIREMENTS

•DOS/V compatible PC with Windows 7 (32-bit, 64-bit) or Windows 10 (32-bit, 64-bit) appropriately installed.

•PC conﬁgurator cable, model MCN-CON or COP-US

1.3 INSTALLING THE R5CON

(1) Start up Windows.

(2) Go to M-System’s web site (http://www.m-system.co.jp). Download and save the R5CON archive in your PC’s local hard

disk.

(3) Conﬁrm the size and version number of the downloaded archive (‘x’ in the ﬁle name as shown below). R5CON_Rx.exe or

R5CON_Rx.zip

(4) Double-click the ﬁle’s icon and locate ‘R5CON_Rx’ folder.

(5) Start up setup.exe in the folder and follow instructions on the screen. Now the R5CON program has been installed.

CAUTION !

If you have already the R5CON program installed in your PC, remove it following the procedure explained in “1.4

UNINSTALLING THE R5CON” before installing a new one.

4R5CON USERS MANUAL EM-9272 Rev.10

1.4 UNINSTALLING THE R5CON

(1) Click ‘Start’ on the task bar and choose Control Panel from Settings menu. (Double-click My Computer icon on the desktop

and choose Control Panel.)

>> Control Panel appears on the display.

(2) Double-click ‘Uninstall a program’ or ‘Program and feature’.

>> ‘Property’ dialog box of Programs and feature appears on the display.

(3) Choose ‘R5CON’ among the list of installed applications.

(4) Choose ‘Add/Remove’.

(5)‘Remove Programs From Your Computer’ dialog box appears on the display. Click OK.

>> All ﬁles installed with the R5CON are removed.

For Windows 10

(1) Click on START button at the lower left of the display to show a list of programs.

(2) Locate R5CON on the list, and right-click on it, then select Uninstall.

5R5CON USERS MANUAL EM-9272 Rev.10

2. BASIC OPERATIONS

Connect the R5 network module to the PC with PC conﬁgurator cable. Conﬁrm the hardware connection in order to write the

setting data to the network module and each I/O module.

2.1 STARTING / QUITTING THE R5CON

Display images shown in this manual may change in detail when the software version is updated.

■STARTING THE R5CON

Press [Start] on the task bar and choose [R5CON] from [Program] menu. The main view appears on the screen as shown

below.

■QUITTING THE R5CON

Choose [Exit] from [File] menu to quit the program.

CAUTION !

Clicking [X] button at the right end of the title bar does not end the program.

6R5CON USERS MANUAL EM-9272 Rev.10

2.2 VIEW COMPONENTS AND FUNCTIONS

The R5CON view is composed of the menu bar at the top, the control panels below it and on the left, and the main frame

including various pop-up windows.

In this section, functions of menu bar and various buttons, and of each frame are explained.

■MENU BAR

Menu Submenu Function

File Open Reading the speciﬁed ﬁle and displaying its contents.

Save Saving the parameters as a ﬁle.

Exit Quitting the R5CON program.

Connect Connect Connecting to the communication line.

Disconnect Disconnecting from the communication line.

■CONTROL PANEL

[Card No.] list Shows the selectable card numbers. Click the arrow at the right to choose a card number in

order to switch the main frame from Overview to the detail view for the selected card (module).

<OverView> button Shows the hardware conﬁguration. Click this button to switch the main frame back to Overview

from each card’s detail view.

<Upload> button Starts uploading I/O module’s information.

<Download> button Starts downloading I/O module’s information to the network module.

<Start> button Starts monitoring of the system.

<Stop> button Stops monitoring of the system.

<Setting> button Opens up the Com. card Settings view.

<Ethernet Setting> button Opens up the Ethernet Settings view for the R5-NE1 module. (Available only when the R5-NE1

module is connected.)

7R5CON USERS MANUAL EM-9272 Rev.10

■OVERVIEW

Item Function Selection Detail

No. Slot No. (1 to 16) ---- ----

In/Out Input or Output IN Input card (module)

OUT Output card (module)

IN/OUT 1 input / 1 re-transmitted output card (module)

Ver. No. Software version ---- ----

Input Type

Type of thermocouple and RTD

---- ----

Type I/O Card (Module) Type None No card mounted

Model No. One of the Model No. mounted

Ch. 1 Value

Ch. 2 Value

Analog I/O value for Ch. 1

Analog I/O value for Ch. 2

Decimal data Shows data sent to the host PLC.

Refer to the relevant descriptions in the data sheet of respective

modules. Scaled range if speciﬁed so.

Indicators Discrete I/O status Green OFF

Ch. 1 (left) to Ch. 16 (right) Red ON

8R5CON USERS MANUAL EM-9272 Rev.10

2.3 CONNECTING/DISCONNECTING THE COMMUNICATION LINE

■CONNECTING

Connecting the R5 network module to the communication line.

Choose [Connect] from [Connect] on the menu bar and the COM Port Setting window pops up on the screen.

Conﬁrm that the power is supplied to the R5 modules and that the conﬁgurator jack of the R5 network module and the COM

port of the PC is ﬁrmly connected with the attached cable.

Choose an appropriate COM port No. (COM1 through COM8) and click OK.

With the communication line established, the communication status lamp turns to green and the COM port No. is shown.

• ➔➔➔

■DISCONNECTING

Choose [Disconnect] from [Connect] on the menu bar.

9R5CON USERS MANUAL EM-9272 Rev.10

3. VIEWS & FUNCTIONS PARTICULAR TO MODULES

3.1 ANALOG I/O MODULE

<Upload> button Uploading the current setting for the I/O module to the window.

<Download> button Downloading the setting on the current display to the R5 module.

Item Function Selectable Range

(must be used within this range)

Card No. Shows Slot No.

Card Type Shows I/O module hardware type

Version No. Shows ﬁrmware version No.

Zero Scale Enter 0% scaling value -32000 to 32000

Full Scale Enter 100% scaling value -32000 to 32000

Bias [Zero Adj.] Enter ﬁne 0% adjustment value (bias) -320.00 to 320.00

Gain [Span Adj.] Enter ﬁne 100% adjustment value (gain) -3.2000 to 3.2000

Zero Base Shows 0% input value in engineering unit Selected range

Full Base Shows 100% input value in engineering unit Selected range

Value Shows the current uploaded value of the scaled range.

10R5CON USERS MANUAL EM-9272 Rev.10

3.2 THERMOCOUPLE & RTD INPUT MODULE

<Upload> button Uploading the current setting for the I/O module to the window.

<Download> button Downloading the setting on the current display to the R5 module.

Item Function Selectable Range

(must be used within this range)

Card No. Shows Slot No.

Card Type Shows I/O module hardware type

Version No. Shows ﬁrmware version No.

Input Type Shows T/C or RTD input type setting

Burnout Shows the burnout type setting

Zero Scale Enter 0% scaling value -32000 to 32000

Full Scale Enter 100% scaling value -32000 to 32000

Bias [Zero Adj.] Enter ﬁne 0% adjustment value (bias) -320.00 to 320.00

Gain [Span Adj.] Enter ﬁne 100% adjustment value (gain) -3.2000 to 3.2000

Zero Base Enter 0% temperature. (factory setting = 0) As shown on the display

Full Base Enter 100% temperature. (factory setting = 0) As shown on the display

Value Shows the current uploaded temperature value.

Limit

(R5-TS V1.00 or higher)

Check the box to limit the input range within Zero Scale and Full Scale

when scaling is set. When no scaling is set and/or when the check box is

not selected, the input range is limited within -15 to +115%.

CAUTION !

Scaling is disabled when both Zero Scale is set to ‘0’ and Full Scale is set to ‘10000.’ The input module will send multiplied

raw data: with °C temperature unit, raw data is multiplied by 10 (e.g. 25.5°C is converted into 255), and with °F temperature

unit, the integer section of raw data is directly converted into the data (e.g. 135.4°F is converted into 135).

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali M-system Sistema I/O

M-system

M-system R3-SV4C Manuale utente

M-system

M-system R3-AS8 Manuale utente

M-system

M-system R7M-MS4-R Manuale utente

M-system

M-system JC-ECT Manuale utente

M-system

M-system R7 Series Manuale utente

M-system

M-system R7F4HC-DAC32C-K Manuale utente

M-system

M-system R7L-DAC16 Manuale utente

M-system

M-system R30MS4 Manuale utente

M-system

M-system R7ML-YS2-R Manuale utente

M-system

M-system R7D-DC8C Manuale utente

M-system

M-system R1M-P4 Manuale utente

M-system

M-system R3-PD16C Manuale utente

M-system

M-system R7M-TS4-R Manuale utente

M-system

M-system R7 Series Manuale utente

M-system

M-system R7 Series Manuale utente

M-system

M-system R7D-RS4 Manuale utente

M-system

M-system R7 Series Manuale utente

M-system

M-system R7ML-DA16 Manuale utente

M-system

M-system R7 Series Manuale utente

M-system

M-system MDR-8 Manuale utente

M-system

M-system R7E-PA8-R Manuale utente

M-system

M-system Devicenet R7F4DD-DA16B-C Manuale utente

M-system

M-system R7HL-YV2 Manuale utente

M-system

M-system R7E-YV2 Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente

WAGO

WAGO I/O-SYSTEM 750 Manuale utente