M5Stack AtomU Manuale utente

AtomU

2021

CONTENTS

1. OUTLINE ............................................................................................................................. 3

1.1. ESP32 PICO ................................................................................................................................ 3

2. SPECIFICATIONS ............................................................................................................. 5

3. QUICK START.................................................................................................................... 6

3.1. ARDUINO IDE ............................................................................................................................ 6

3.2. BLUETOOTH SERIAL....................................................................................................................... 6

3.3. WIFI SCANNING ............................................................................................................................ 8

1.OUTLINE

AtomU is a very small and flexible IoT speech recognition development board,

using Espressif's `ESP32` main control chip, equipped with two low-power `Xtensa®

32-bit LX6` microprocessors, main frequency Up to `240MHz`. It has the characteristics

of compact size, strong performance and low power consumption. Integrated USB-A

interface, plug and play, easy to upload, download and debug the program. Integrated

`Wi-Fi` and `Bluetooth` modules, with built-in digital microphone SPM1423 (I2S), can

achieve clear audio recording, suitable for various IoT human-computer interaction,

voice input recognition scenarios (STT)

1.1.ESP32 PICO

•The ESP32-PICO-D4 is a System-in-Package (SiP) module that is based on ESP32, providing

complete Wi-Fi and Bluetooth functionalities. The module has a size as small as (7.000±0.100)

mm × (7.000±0.100) mm × (0.940±0.100) mm, thus requiring minimal PCB area. The module

integrates a 4-MB SPI flash. At the core of this module is the ESP32 chip*, which is a single 2.4

GHz Wi-Fi and Bluetooth combo chip designed with TSMC’s 40 nm ultra-low power

technology. ESP32-PICO-D4 integrates all peripheral components seamlessly, including a

crystal oscillator, flash, filter capacitors and RF matching links in one single package. Given

that no other peripheral components are involved, module welding and testing is not required

either. As such, ESP32-PICO-D4 reduces the complexity of supply chain and improves control

efficiency. With its ultra-small size, robust performance and low-energy consumption, ESP32-

PICO-D4 is well suited for any space-limited or battery-operated applications, such as

wearable electronics, medical equipment, sensors and other IoT products.

2. SPECIFICATIONS

Resources

Parameter

ESP32-PICO-D4

240MHz dual core, 600 DMIPS, 520KB SRAM, 2.4GHz

Wi-Fi, dual mode Bluetooth

Flash

4MB

Input voltage

5V @ 500mA

button

Programmable buttons x 1

Programmable

RGB LED

SK6812 x 1

Antenna

2.4GHz 3D Antenna

Operating

temperature

32°F to 104°F ( 0°C to 40°C )

3.QUICK START

3.1.ARDUINO IDE

Visit Arduino's official website(https://www.arduino.cc/en/Main/Software),Select the installation

package for your own operating system to download.

>1.Open up Arduino IDE, navigate to `File`->`Peferences`->`Settings`

>2.Copy the following M5Stack Boards Manager url to `Additional Boards Manager URLs:`

https://raw.githubusercontent.com/espressif/arduino-esp32/gh-

pages/package_esp32_dev_index.json

>3.Navigate to `Tools`->`Board:`->`Boards Manager...`

>4.Search `ESP32` in the pop-up window, find it and click `Install`

>5.select `Tools`->`Board:`->`ESP32-Arduino-ESP32 DEV Module

>6Please install FTDI driver before use: https://docs.m5stack.com/en/download

3.2.BLUETOOTH SERIAL

Open the Arduino IDE and open the example program

`File`->`Examples`->`BluetoothSerial`->`SerialToSerialBT`. Connect the device to the computer

and select the corresponding port to burn. After completion, the device will automatically run

Bluetooth, and the device name is `ESP32test`. At this time, use the Bluetooth serial port sending

tool on the PC to realize the transparent transmission of Bluetooth serial data.

#include "BluetoothSerial.h"

#if !defined(CONFIG_BT_ENABLED)|| !defined(CONFIG_BLUEDROID_ENABLED)

#error Bluetooth is not enabled! Please run `make menuconfig` to and en

able it

#endif

BluetoothSerial SerialBT;

void setup() {

Serial.begin(115200);

SerialBT.begin("ESP32test"); //Bluetooth device name

Serial.println("The device started, now you can pair it with bluetoot

h!");

}

void loop() {

if (Serial.available()) {

SerialBT.write(Serial.read());

}

if (SerialBT.available()) {

Serial.write(SerialBT.read());

}

delay(20);

}

3.3.WIFI SCANNING

Open the Arduino IDE and open the example program `File`->`Examples`->`WiFi`->`WiFiScan`.

Connect the device to the computer and select the corresponding port to burn. After

completion, the device will automatically run the WiFi scan, and the current WiFi scan result can

be obtained through the serial port monitor that comes with the Arduino.

#include "WiFi.h"

void setup()

{

Serial.begin(115200);

// Set WiFi to station mode and disconnect from an AP if it was pre

viously connected

WiFi.mode(WIFI_STA);

WiFi.disconnect();

delay(100);

Serial.println("Setup done");

}

void loop()

{

Serial.println("scan start");

// WiFi.scanNetworks will return the number of networks found

int n =WiFi.scanNetworks();

Serial.println("scan done");

if (n == 0){

Serial.println("no networks found");

}else {

Serial.print(n);

Serial.println(" networks found");

for (int i =0;i <n;++i){

// Print SSID and RSSI for each network found

Serial.print(i +1);

Serial.print(": ");

Serial.print(WiFi.SSID(i));

Serial.print(" (");

Serial.print(WiFi.RSSI(i));

Serial.print(")");

Serial.println((WiFi.encryptionType(i)== WIFI_AUTH_OPEN)?"

":"*");

delay(10);

}

Serial.println("");

// Wait a bit before scanning again

delay(5000);

}

Federal Communications Commission (FCC) Statement

You are cautioned that changes or modifications not expressly

approved by the part responsible for compliance could void the

user’s authority to operate the equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for

help.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including

interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

The product comply with the FCC portable RF exposure limit set

forth for an uncontrolled environment and are safe for intended

operation as described in this manual. The further RF exposure

reduction can be achieved if the product can be kept as far as

possible from the user body.

Indice

Altri manuali M5Stack Scheda madre

M5Stack

M5Stack M5StickC Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente