MAC TOOLS MB427UCFD Manuale utente

MB427UCFD/BK/BL/LG/OR

1 02/18/18

ASSEMBLY INSTRUCTIONS

FIG. 1

Mount the push handle (#9) to the same side of the

cart as the locking casters, using the four bolts

provided.

• Lock lid and drawers before moving. • Apply brake on locking casters anytime cart

is in place. • Do not pull cart. Push from handle on end to move. • Units can tip

or fall causing damage or personal injury. • Cart is designed to roll easily on ﬂat

surfaces and should not be used on uneven or inclined surfaces. • Do not open

more than one loaded drawer at a time. • Do not stand on or step in drawers. • Keep

children away from unit. • Wear gloves when lifting edges. • Before connecting to

a power supply, always check to make sure the power supply corresponds to the

voltage required on the product. • Fully insert plug to reduce the risk of electric

shock. • Always unplug when not in use. • Disconnect power before installing or

servicing. • Do not try to plug in unit or product when hands are wet or damp, or if

standing on a wet or damp surface or in water. • Never attempt to pick up unit or

plugged in product that should fall in standing water. • This unit is not waterproof

and is intended for general use indoors. • Do not use in potentially dangerous

locations, such as ﬂammable or explosive atmospheres. • Keep cord away from

heat, oil, sharp edges or moving parts. • Handling the brass parts of this product

will expose you to lead, a chemical known to the State of California to cause birth

defects and other reproductive harm. Wash hands after handling. • This product

may contain one or more chemicals known to the State of California to cause cancer

and birth defects or other reproductive harm. Wash hands thoroughly after handling.

• Failure to heed these warnings may result in personal injury and/or property damage.

WARNING

Read and understand all instructions. Failure to follow all instructions listed below, may

result in electric shock, fire, explosion and/or serious personal injury. It is the responsibility

of the owner to make sure all personnel read this manual prior to using the tool. It is also the

responsibility of the tool owner to keep this manual intact and in a convenient location for all

to see and read. If the manual or product labels are lost or not legible, contact Mac Tools for

replacements. If the operator is not fluent in English, the product and safety instructions shall

be read and discussed with the operator in the operator's native language by the purchaser/

owner or his designee, making sure that the operator comprehends its contents.

MB427UCFD/BK/BL/LG/OR

Deluxe 42" 7 Drawer Cart

SERVICE CART WEIGHT CAPACITY

Maximum Total Net Load ........................... 750 LBS

Top Lid of Cart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 LBS

Top Compartment of Cart ........................... 150 LBS

3" Drawer ................................... 100 LBS each

4" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 LBS each

7" Drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 LBS each

PLEASE NOTE: Loading cart beyond rated capacity may cause structural

damage to the cart as well as personal and /or property damage. Please

educate your customers to the dangers of overloading. Do not attempt to

push cart with items on the top lid.

WARNING

Fig 1.

MB427UCFD/BK/BL/LG/OR

2 02/18/18

TROUBLESHOOTING

MB427UCFD/BK/BL/LG/OR

Deluxe 42" 7 Drawer Cart

PARTS LIST AND PARTS DRAWING

Item No.Part No. No. Req'd Description

1 RS327RCP 1 Cord Rubber Protector

2 RS327PSK 1 Power Strip Kit

3 MB427LIDR 1 Lid - Red

MB427LIDBK 1 Lid - Black

MB427LIDBL 1 Lid - Blue

MB427LIDLG 1 Lid - Lime Green

MB427LIDOR 1 Lid - Orange

4 RS427LMR 1 Lock Mechanism - Red

RS427LMBK 1 Lock Mechanism - Black

RS427LMBL 1 Lock Mechanism - Blue

RS427LMLG 1 Lock Mechanism - Lime Green

RS427LMOR 1 Lock Mechanism - Orange

5 RS427TML 1 PVC Top Mat

6 RS427GPC 2 Gas Piston - Chrome

RS427GPBK 2 Gas Piston - Black

7 RS190UCPBT 3 Pry Bar Holder

8 ** 1 PVC Liner for Top Compartment

9 RS327PHKS 1 Push Handle w/Hardware - Silver

RS327PHKBK 1 Push Handle w/Hardware - Black

10 1 Cart Frame

11 RSSWLCSBK 2 5"x2" Swivel Locking Caster - Black

RSSWLCS 2 5"x2" Swivel Locking Caster - Chrome Plated

12 * 16 Spacer (8.5x1.5)

13 * 16 Spring Spacer (8.5x1.5)

14 * 16 Hex Screw (M8x16)

15 RS403UCLB 1 Safety Bumper (4pc Set)

16 RS32718RBS 8 Roller Bearing Slides (18") (pair)

17 RSSWCSBK 2 5"x2" Swivel Non-Locking Caster - Black

RSSWCS 2 5"x2" Swivel Non-Locking Caster - Chrome Plated

18 MB4277DR 1 7" Drawer - Red

MB4277DBK 1 7" Drawer - Black

MB4277DBL 1 7" Drawer - Blue

MB4277DLG 1 7" Drawer - Lime Green

MB4277DOR 1 7" Drawer - Orange

19 MB4274DR 4 4" Drawer - Red

MB4274DBK 4 4" Drawer - Black

MB4274DBL 4 4" Drawer - Blue

MB4274DLG 4 4" Drawer - Lime Green

MB4274DOR 4 4" Drawer - Orange

20 RS427ADPBK 7 Alum Drawer Pull - Black

RS427ADPS 7 Alum Drawer Pull - Silver

21 ** 7 PVC Drawer Liners

22 MB4273DR 2 3" Drawer - Red

MB4273DBK 2 3" Drawer - Black

MB4273DBL 2 3" Drawer - Blue

MB4273DLG 2 3" Drawer - Lime Green

MB4273DOR 2 3" Drawer - Orange

23 RS327LKBK 1 Lock with Keys- Black

RS327LKS 1 Lock with Keys - Silver

Only item number's identified by part number are available separately.

Also Available:

RSMB427UCFDPLK Product Label Kit

* RS89UCCB Caster Hardware Kit Chrome (16 each hex bolts M8x16,

spring washers, flat washers)

RS89UCCBBK Caster Hardware Kit Black (16 each hex bolts M8x16,

spring washers, flat washers)

** RS4278LK 8pc PVC Liner Kit (incl #8 & #21)

Problem: Drawers appear not to fit, do not slide in accurately and bump the cart sides.

Solution: The roller bearing slides must be fully engaged into the mounting slots on all drawers. They potentially could fall out of position in shipment or

during assembly. Remove the drawer that is out of position. The drawer is removed by the two clips on the roller bearing slides.

Simply push the roller bearing slide back down into position.

Insert the drawer back onto the roller bearing slides.

Questo manuale è adatto per i seguenti modelli

Altri manuali MAC TOOLS Deposito attrezzi

MAC TOOLS

MAC TOOLS MBUCSS155 Manuale utente

Manuali Deposito attrezzi popolari di altre marche

Ryobi

Ryobi RWB03 Manuale utente

Husky

Husky H27CH5TR4BGK Manuale utente

Scheppach

Scheppach ts 2100 Manuale utente

Cornwell Tools

Cornwell Tools CTB360AKBK Manuale utente

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuale utente

Cassese

Cassese CS200 CART Manuale utente

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuale utente

Lista

Lista Align Istruzioni per il montaggio

Workzone

Workzone 99609 Manuale utente

Stanley

Stanley STST83800-1 Manuale utente

Homak

Homak PROFESSIONAL Series Manuale del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuale utente

Husky

Husky H5CH2R Manuale utente

BGS technic

BGS technic 4107 Manuale utente

Clarke

Clarke CWB1250 Manuale utente

Ryobi

Ryobi RWB02 Manuale utente

Husky

Husky H52CH6HDV3WHT Manuale utente

Sealey

Sealey PTB66004 Manuale utente