Mace Screena Manuale utente
1 | P a g e
Operators manual
Screena
MANUFACTURERS ORIGINAL INSTRUCTIONS MCE-SCREENA-21-A1.2
2 | P a g e
Table of Contents
CONTENTS............................................................................................................................... 2
IMPORTANT.............................................................................................................................. 3
SAFETY RULES........................................................................................................................ 4
Explosion and Fire Hazards................................................................................................. 5
ELECTROCUTION HAZARD..................................................................................................... 5
SETUP HAZARD....................................................................................................................... 6
Bodily Injury Hazard............................................................................................................. 6
COMPONENT DAMAGE HAZARD............................................................................................ 7
Damaged Machine Hazard ................................................................................................... 7
LEGEND.................................................................................................................................... 8
PRE-OPERATION INSPECTION............................................................................................... 9
Fundamentals......................................................................................................................10
MAINTENANCE........................................................................................................................12
Observe and Obey...............................................................................................................12
Maintenance symbols legend.............................................................................................12
Check mesh tension: ..........................................................................................................13
Check all fasteners for tightness:......................................................................................14
Scheduled Maintenance......................................................................................................14
FUNCTION TESTS...................................................................................................................15
WORKPLACE INSPECTION ....................................................................................................18
Fundamentals......................................................................................................................19
OPERATING INSTRUCTIONS.................................................................................................20
Fundamentals......................................................................................................................21
Instructions..........................................................................................................................22
TRANSPORT INSTRUCTIONS................................................................................................24
SPECIFICATIONS....................................................................................................................25
CONTENTS
3 | P a g e
Important
Read, understand and obey these safety rules and operating instructions
before operating this machine.
Only trained and authorized personnel shall be permitted to operate this
machine. This manual should be considered a permanent part of your
machine and should remain with the machine at all times. If you have any
questions, please call Mace Industries.
Contact us
Mace Industries Limited
Units 1-3 Macadam Road
Earlstrees Industrial Estate
Corby
NN17 4JN
Web: www.maceindustries.co.uk
Tel: 01536 206 600
Fax: 01536 206173
IMPORTANT
4 | P a g e
Danger
Failure to obey the instructions and safety rules in this
manual will result in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe machine operation contained in this
operator's manual.
1 Avoid hazardous situations.
Know and understand the safety rules before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey:
Manufacturer's instructions and safety rules—safety and operator's manuals and
machine decals employer's safety rules and worksite regulations applicable to
governmental regulations.
SAFETY RULES
5 | P a g e
Electrocution Hazards
This machine is not electrically insulated and will not provide protection from contact
with or proximity to electrical current.
Do not operate the machine during lightning or storms.
Do not use the machine as a ground for welding.
Ensure safe routing of power cable to minimise risk of electrocution.
Keep away from the machine if it contacts energized power lines. Personnel must
not operate or move the machine until energized power lines are shut off.
Explosion and Fire Hazards
Do not operate the machine in hazardous locations or locations where potentially
flammable or explosive gases or particles may be present.
ELECTROCUTION
HAZARD
6 | P a g e
Setup Hazards
Do not use the machine whilst under the influence of alcohol or drugs.
Do not alter or disable machine components that in any way affect safety and
stability.
Do not replace items critical to machine stability with items of different weight or
specification.
Be aware of ground surface prior to installation.
Do not place ladders or scaffolding against any part of this machine.
Do not use the machine on a moving or mobile surface or vehicle.
Ensure all tyres are in good condition and cotter pins are properly installed.
Do not ride on machine.
Bodily Injury Hazard
Use common sense and planning when installing and operating the machine.
Keep hands and limbs away from moving belt.
Always wear correct PPE.
SETUP HAZARD
7 | P a g e
Component Damage Hazard
Do not use machine as a ground for welding.
Do not attempt to clear excavator bucket by hitting the Screena hopper.
If using a generator ensure it has a voltage regulator fitted.
Do not overload the machine - 250kg MAX load
Damaged Machine Hazard
Do not use a damaged or malfunctioning machine.
Conduct a thorough pre-operation inspection of the machine and test all functions
before each work shift. Immediately tag and remove from service a damaged or
malfunctioning machine.
Be sure all maintenance has been performed as specified in this manual and the
appropriate Mace Industries service manual.
Be sure all decals are in place and legible
COMPONENT
DAMAGE HAZARD
8 | P a g e
1. Motor
7. Wheels
13. Foot Pin
2. Control Box
8. Vibratory (Oscillating) Mounts
14. Pivoting Foot
3. Power In Connector
9. Machine Handles
4. Power Out Connectors
10. Adjustable Feet
5. Start Button
11. Mesh Tensioner
6. Stop Button
12. Mesh Hook
LEGEND
9 | P a g e
Do not operate unless:
You are trained, authorised and have learnt and practiced the principles of safe machine
operation contained in this operator's manual.
1 Avoid hazardous situations.
2 Always perform a pre-operation inspection.
Know and understand the pre-operation inspection before going on to the next
section.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
PRE-OPERATION
INSPECTION
10 | P a g e
Fundamentals
It is the responsibility of the operator to perform a pre-operation inspection and
routine maintenance.
The pre-operation inspection is a visual inspection performed by the operator prior
to each work shift.
The inspection is designed to discover if anything is apparently wrong with a
machine before the operator performs the function tests.
The pre-operation inspection also serves to determine if routine maintenance
procedures are required. Only routine maintenance items specified in this manual
may be performed by the operator.
Refer to the list on the next page and check each of the items and locations for
modifications, damage or loose or missing parts.
A damaged or modified machine must never be used. If damage or any variation
from factory delivered condition is discovered, the machine must be tagged and
removed from service.
Repairs to the machine may only be made by a qualified service technician,
according to the manufacturer's specifications. After repairs are completed, the
operator must perform a pre-operation inspection again before going on to the
function tests.
Scheduled maintenance inspections shall be performed by qualified service
technicians, according to the manufacturer's specifications.
Altri manuali per Screena
1
Indice
Altri manuali Mace Attrezzature per l'edilizia
