Macrom M-BTP50.B Manuale utente
USER MANUAL
MANUALE UTENTE
M-BTP50.B
M-BTP50.W
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 1 13/09/2013 10.00.00
-2-
Table of contents
Warranty
Specifications
Product overview
Charge the battery
Indicator LED status
Switch On/Off
Pairing and connecting with a Bluetooth device
Re-connecting with a Bluetooth device
Disabling the Bluetooth connection
Adjust the Volume
Listen to music
Auxiliary input
USB charging port
Product care
Package contents
Garanzia
Specifiche
Panoramica del prodotto
Caricare la batteria
Stato indicatori LED
Accensione e spegnimento
Pairing e connessione ad un dispositivo Bluetooth
Connessione con un dispositivo Bluetooth
Disattivazione della connessione Bluetooth
Regolare il volume
Ascoltare la musica
Ingresso ausiliario
Porta USB di ricarica
Cura del prodotto
Contenuto della confezione
3
3
4
5
5
5
6
6
6
6
7
7
8
8
8
9
9
10
11
11
11
12
12
12
12
13
13
14
14
14
EN
IT
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 2 13/09/2013 10.00.00
Specifications
M-BTP50 can play music from a compatible music player. The operating range is within
10 meters. M-BTP50 is compliant with the following Bluetooth® specifications: Bluetooth
V4.0 with aptX® Technology and supports A2DP profile. Auxiliary audio input 3,5 mm audio
connector. Power supply input AC 100-240V ~ 50/60Hz. M-BTP50 includes a USB port on the
back to allow you to charge a mobile device (5V DC - 0.5 A).
-3-
Warranty
Thank you for purchasing this Macrom product. Should your product need warranty service,
please return it to the shop where you buy it or to the Macrom distributor in your country.
The warranty does not cover damage due to improper use and or installation, incorrect
connections to power supply and audio video sources, exposure to excessive humidity,
unauthorized repair attempts or modifications.
EN
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 3 13/09/2013 10.00.00
Product overview
Battery indicator LED
Volume up
Power ON/OFF/Play/Pause
USB port
-4-
EN
Auxiliary Input
Volume down
Bluetooth indicator LED
DC IN16V
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 4 13/09/2013 10.00.01
Connect the supplied AC adapter to the back of M-BTP50. Plug
the supplied AC adapter into a wall power outlet to begin charging
M-BTP50’s internal battery. The battery indicator LED is steady
orange while charging and will turn off when the battery is fully
charged. For a faster charge please remember to power off the
unit before charging the battery. Full charge time is approx 4
hours.
Charge the battery
Switch On/Off
To switch ON, press and hold the key about 3 seconds
until the speaker prompts 2 ascending tone and the Bluetooth
indicator LED starts blinks.
To switch OFF, press and hold the key about 3 seconds until
the speaker prompts 4 descending tone and the Bluetooth
indicator LED will shut off.
-5-
EN
Bluetooth indicator LED
- Blinking blue LED: Bluetooth on with no connection (ready to pair).
- Solid blue LED: Bluetooth paired and connected.
Battery indicator LED
- Orange LED: Charging (When plugged into a wall outlet)
- Red LED: Low battery (When running on the built-in battery)
Indicator LED status
DC IN16V
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 5 13/09/2013 10.00.02
Pairing and connecting with a Bluetooth device
Every time the unit is switched on, it will connect to the last connected device automatically
and the unit prompts two tones when is connected.
Power on the M-BTP50. The blue LED blinks. From the Bluetooth function of the device to
be paired search for new device named “M-BTP50”. Select it and if requested enter “0000”
passcode. When pairing is completed successfully the pairing indicator LED is blue steady
and the unit prompts two tones. If the pairing procedure is not successful, please switch off
the unit and repeat the above steps. The specific pairing procedure may vary, so please refer
to your device user manual for further information.
Re-connecting with a Bluetooth device
To adjust the unit volume while listening to music press the volume up or down keys.
Adjust the Volume
-6-
EN
To unpair a Bluetooth device that is already connected, turn off bluetooth connection on the
connected device. The M-BTP50 will be in pairing mode.
Disabling the Bluetooth connection
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 6 13/09/2013 10.00.03
Connect the unit to a compatible music player that supports A2DP profile. To play or pause
music from the unit short press key.
Listen to music
-7-
EN
To connect a device to the auxiliary input use the cable provided with the unit. If a connector
is plugged in the auxiliary input the Bluetooth function is automatically disabled. Bluetooth
functions is automatically resumed when the connector is removed from the auxiliary input.
Auxiliary input
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 7 13/09/2013 10.00.04
USB charging port
M-BTP50 includes a USB port on the back to allow you to charge a mobile device. Plug
M-BTP50 into a wall outlet and then connect your device to the USB port using USB cable (not
included).
Note: The charging of mobile devices using the USB port is only allowed if the M-BTP50
is plugged into a wall outlet.Power output of the USB port is 500mA. Media devices that
require more power may not charge through this USB port.
-8-
EN
Product care
Please remember that your Macrom product is an electronic device, and so needs to be
treated with care.
Do not subject it to mechanical shock or vibrations.
Do not subject it to eccessive heat.
Keep it away from water and excessively humid areas.
Keep it away from high electromagnetic fields.
There are no user-serviceable parts inside. Opening the product or try to repair it will
terminate the warranty.
Package contents
M-BTP50 wireless speaker.
Power supply: AC 100-240V ~ 50/60Hz - DC OUT 16V/1.8 A.
Auxiliary audio cable with 3.5 mm jack connectors.
Carrying case.
User manual.
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 8 13/09/2013 10.00.04
Specifiche
M-BTP50 permette di ascoltare musica con i riproduttori musicali compatibili. Il raggio
operativo è di circa 10 metri. M-BTP50 è compatibile con le seguenti specifiche Bluetooth®:
Bluetooth V4.0 con tecnologia aptX® e supporta il profilo A2DP.
Ingresso ausiliario con connetore stereo jack da 3.5mm.Ingresso di alimentazione AC 100-
240V ~ 50/60Hz. M-BTP50 è provvisto di porta USB posteriore che permette di ricaricare un
dispositivo mobile (DC 5V - 0,5A).
-9-
Garanzia
Grazie per aver acquistato questo prodotto Macrom. Se il prodotto necessitasse di assistenza
far riferimento al negozio presso cui è stato acquistato o al distributore della vostra tua
nazione. La garanzia non copre i danni accidentali dovuti ad uso o installazione non
appropriati, connessioni scorrette all’alimentazione o a sorgenti audio video ed esposizione
ad eccessiva umidità.
IT
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 9 13/09/2013 10.00.04
-10-
IT
Panoramica del prodotto
Indicatore LED batteria
Indicatore LED Bluetooth
Volume più
Accensione ON/OFF/Play/Pause
Volume meno
Porta USB di ricarica
Ingresso ausiliario
DC IN16V
Manuale di istruzioni M-BT50 red_ ENG-IT.indd 10 13/09/2013 10.00.05
Altri manuali per M-BTP50.B
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Macrom Altoparlanti
