Makeblock mElephant Manuale utente
Makeblock mElephant 3D Printer
mElephant 3D Printer
User Guide V1.0
Makeblock mElephant 3D Printer
Contents
What is mElephant?
Package Content
Specifications
Before Use
Print with Micro SD card
Install Arduino Driver
Install Cura, and print with USB
3D Prints Show
Makeblock mElephant 3D Printer
What is mElephant?
Makeblock mElephent 3D Printer is the new generation of Makeblock 3D printer, which is a 3D
printer based on an open source and aluminum frame.
Makeblock studied very hard on the 1st generation Constructor I 3D Printer, and made huge
improvement. With the most steady and concise Prusa i3 structure, delicate brand new designed
OLED screen, automatically print bed leveling module, and more powerful integrating control
panel, mElephant is the most powerful 3D printer in Makeblock ever!
mElephant matching with Electronics (RAMPS1.4 shield, Mega2560 compatible board) and
software (Crua,Printrun), you can get high-quality prints and extreme precision, XY Resolution:
0.1mm, Layer Resolution: 0.1-0.3mm. You can enjoy so much fun from your own 3D printer and
even use it for prototyping, printing art craft, models, sculptures or toys.
mElephant also can be extensioned to a 4-in-1 machine (3D printing, Laser Engraving, Drawing,
CNC) with additional parts.
No matter if you are students, office clerks, designers, engineers, educators or inventors, you can
always bring your ideas to life by printing out objects such as prototypes, various models,
homehold articles, phone cases, toys, and mechanical parts to build your robots.
Makeblock mElephant 3D Printer
Package Content
Makeblock mElephant 3D Printer
Specifications
Makeblock mElephant 3D Printer
Before Use
1. Make sure all screws have been tightened.
2. Make sure the timing belts of both X-axis and Y-axis are tensioned.
Makeblock mElephant 3D Printer
3. Stick a piece of paper tape on the platform, Place the paper tape
carefully and make sure no spare part.
Makeblock mElephant 3D Printer
4. Plug in power, and press the knob to open the mElephant printer.
5. Rotate the knob clockwise, choose "Prepare", and then press the knob
again to confirm.
6. Rotate the knob clockwise, choose "Preheat PLA" and press the knob
to confirm preheating.
Makeblock mElephant 3D Printer
7. Rotate the knob clockwise, choose "Preheat PLA1" and press the knob
to confirm
8. Go back to the main menu, and you will see the target temperature has
already changed to 180°and the temperature is going up continuously.
Makeblock mElephant 3D Printer
9. When the temperature has already reached 179°, get ready to put the
filament into the nozzle.
10. The filament will curve naturally , so make sure to straighten the
front-end of the filament in order to insert the filament into the extrusion
head smoothly.
Indice
Altri manuali Makeblock Stampante 3D
