MASSIVit 1800 Series Istruzioni operative

MASSIVit Service Group SP-07-001 Rev 12

This document contains proprietary and confidential material of MASSIVit Ltd. Any unauthorized reproduction,

use, or disclosure of this material, or any part thereof, is strictly prohibited. This document is solely for the

use of MASSIVit employees and authorized MASSIVit customers.

MASSIVit 3D Printers

1800 Series Site Preparation Guide

1 Need help? Contact support@massivit.com Site Preparation Manual

The material furnished in this document is believed to be accurate and reliable. However, no

responsibility is assumed by MASSIVit 3D for the use of this document or any material included

herein.

MASSIVit 3D reserves the right to make changes to this document or any material included

herein at any time and without notice.

Contact MASSIVit 3D at:

MASSIVit 3D Headquarters

11 Pesah Lev st.

Lod 712936 Israel

Phone: (972) 8-6519486

Fax: (972) 8-6900758

Email: [email protected]

European Office

11 Pesah Lev st.

Lod 712936 Israel

Phone: (972) 8-6519486

Fax: (972) 8-6900758

Email: [email protected]

North-American Office

11 Pesah Lev st.

Lod 712936 Israel

Phone: (972) 8-6519486

Fax: (972) 8-6900758

Email: [email protected]

Chinese Office

11 Pesah Lev st.

Lod 712936 Israel

Phone: (972) 8-6519486

Fax: (972) 8-6900758

Email: info@massivit.com

Website: http://massivit3d.com

Customer Support: support@massivit3d.com

2 Need help? Contact support@massivit.com Site Preparation Manual

Table of Contents

Introduction...............................................................................................................................................4

About the MASSIVit 3D Printers site preparation..............................................................................4

Safety..........................................................................................................................................................5

General Precautions and Cautions...................................................................................................5

Fire Prevention........................................................................................................................................5

Waste Disposal ......................................................................................................................................5

Materials Handling.................................................................................................................................6

Personnel Safety Considerations........................................................................................................6

Accountability

..........................................................................................................................................7

Shipping and Handling.........................................................................................................................7

Site and Facilities Requirements .........................................................................................................7

Lifting and Delivery................................................................................................................................7

Unpacking and Installation..................................................................................................................7

System Overview......................................................................................................................................8

Printer Dimensions and

Weight

..........................................................................................................8

Machine Height Configurations.......................................................................................................9

System External Components ...........................................................................................................10

Site Requirements..................................................................................................................................11

Unloading Space.................................................................................................................................11

Doors and Hallways Clearances ......................................................................................................11

Conveying equipment.......................................................................................................................11

Workspace

Clearances

.....................................................................................................................12

Floor Surface and Strength................................................................................................................13

Temperature and Humidity................................................................................................................14

Ventilation and Fume Extraction......................................................................................................14

Facility

Requirements

............................................................................................................................15

Electrical

Infrastructure

......................................................................................................................15

Pneumatic Requirements...................................................................................................................18

Lighting

...................................................................................................................................................19

Communication

...................................................................................................................................19

Graphic PC requirements..................................................................................................................19

Gel storage...........................................................................................................................................20

Fire Extinguisher....................................................................................................................................20

Eyewash Station...................................................................................................................................20

Appendix A: Site Preparation Check List..........................................................................................21

3 Need help? Contact support@massivit.com Site Preparation Manual

Table of Figures

Figure 1: Printer Dimensions drawing......................................................................................................... 8

Figure 2-Layout drawing .............................................................................................................................. 9

Figure 3- Machine layout........................................................................................................................... 10

Figure 4: Interface Box................................................................................................................................ 10

Figure 5: Workspace Clearances............................................................................................................. 12

Figure 6-Leveling and Supporting Pads - Specifications...................................................................... 13

Figure 7-European connection diagram................................................................................................ 16

Figure 8-North America connection diagram....................................................................................... 17

Table List

Table 1-Dimensions and Weight................................................................................................................. 9

Table 2-Electrical Requirements............................................................................................................... 15

Table 3-Power Consumption..................................................................................................................... 15

Table 4-Transformer specifications........................................................................................................... 16

Introduction

4 Need help? Contact support@massivit.com Site Preparation Manual

Introduction

About the MASSIVit 3D Printers site preparation

This document is intended to guide and assist you in preparing your site for the MASSIVit

3D 1800 Series printers and includes prerequisites regarding the various elements

needed on site prior to installation.

The tables and figures herein provide the different dimensions and weights of the

assembled systems as well as various helpful information intended to assist you in

planning the placement site.

Read and thoroughly understand the information in this manual safety instructions. If

any part of this manual is not clear, contact MASSIVit 3D Customer Support for

clarifications.

MASSIVIT representatives supervise the unloading, unpacking, transfer and placement

of the printer at its destination and final installation process.

Safety

5 Need help? Contact support@massivit.com Site Preparation Manual

Safety

General Precautions and Cautions

This product is designed and manufactured to ensure maximum safety of operation. It

should be operated and maintained in strict compliance with the safety precautions,

warnings, and operating instructions contained in official MASSIVit 3D publications.

Do not modify the printer in whole or in part in any way without prior written

approval by MASSIVit 3D.

Do not connect any third-party equipment to the printer without written approval

from MASSIVit 3D.

Make sure that only properly trained and fully qualified personnel are authorized

to operate this equipment.

Unauthorized personnel should not be allowed access and provide with any form

of service to the printer.

In the event of system malfunction or of improper response to safety controls,

suspend all operation of the equipment, and notify MASSIVit 3D’s Customer

Support Department immediately.

Fire Prevention

Do not use water to put out a fire. Use water spray only to cool containers. Do not

pour water on leaked materials.

Additional Fire Prevention equipment should be installed according to local laws

and regulations.

Waste Disposal

Liquid and solid waste should be disposed of per local laws and regulations, including:

Printing material containers

Wipes and gloves used for cleaning the printer

Safety

6 Need help? Contact support@massivit.com Site Preparation Manual

Materials Handling

DIMENGEL100 BASE containers should be kepttightly closed in a dryand well-ventilated

place, keep away from heat and out of direct sunlight.

Maximum storage temperature: 30°C (86°F)

Containers can be stacked up to a maximum of 3 containers on top of one

another.

Personnel Safety Considerations

Facility personnel (especially operators) should be familiar with the emergency power

shutdown procedure and with howto notifythe local fire department. Being sufficiently

prepared for an emergency can help prevent injury and save expensive equipment.

Electrical Shock Hazard

The customer responsibility is to ensure that electrical works comply with the local

electrical code and the relevant laws and regulations. The customer should provide

qualified and registered electricians to perform operations as required by these laws

and regulations.

Massivit Dealers and service personnel are not authorized to perform maintenance

processes for the site electrical infrastructure and printer’s connections to this structure.

Safe isolation of the printer from power prior to service operations shall be done

according to the local regulation, and is under the customer responsibility.

Hand Protection

Always use powder free protective gloves when handling the Gel system, cleaning

fluids or waste liquids. The Gel contains irritant materials. Prolonged or repeated

contact with hands may result in symptoms such as redness and irritation. These

symptoms may not appear immediately.

Eye Protection

Always use protective goggles when handling the Gel. The Gel contains irritant

materials. Contact with eyes may result in symptoms such as redness and irritation.

These symptoms may not appear immediately.

Accountability

7 Need help? Contact support@massivit.com Site Preparation Manual

Accountability

Shipping and Handling

MASSIVit 3D will deliver the machine packed and ready for shipment (sea or air) at the

MASSIVit 3D site. Shipping from the MASSIVit Production site to the customer dock is the

customer’s responsibility including insurance and taxes.

The Massivit system includes Uptime Kit supplied inside Printer crate.

Site and Facilities Requirements

The customer is responsible for preparing the installation site according to the

instructions and guidelines provided in this document. MASSIVit 3D will advise the

customer on-site preparation upon request.

Lifting and Delivery

A professional mover that can provide the proper lifting and moving apparatus should

lift and convey the printer from the truck to the installation site.

Unpacking and Installation

Unpacking and Installation of the printer must be performed by MASSIVIT authorized

customer service engineers only.

System

Overview

8 Need help? Contact support@massivit.com Site Preparation Manual

System Overview

Printer Dimensions and

Weight

The MASSIVit 1800 Printer Length and Weight are specified in the attached layout

drawing.

Figure 1: Printer Dimensions drawing

2600 mm

3000 mm

1640 mm

2200 mm

Indice

Altri manuali MASSIVit Stampante 3D

MASSIVit

MASSIVit Massivit1800 Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente