Matrix Visionpro Manuale utente

VISIONPRO

Quick Start

VISIONPRO

The Digital PBX for Small Offices

Quick Start

Documentation Disclaimer

Matrix Comsec reserves the right to change, at any time, without prior notice, the product design,

specifications, components, as engineering and manufacturing may warrant.

This is a general documentation for all models/configurations of the product. The product may not

support some of the features/facilities described in this document.

While every reasonable effort has been made to ensure accuracy of content in this document,

Matrix Comsec assumes no responsibility for errors or omissions that may occur herein. No

liability is assumed for damages, costs, expenses resulting from unauthorized modifications or

repairs to the product; failure to use information or to comply with the installation, operation and

maintenance instructions contained in this document.

means without the prior written consent of Matrix Comsec.

Version V1

Release date: October 4, 2019

Table of Contents i

Contents

Know Your VISIONPRO ................................................................................. 1

Overview ........................................................................................................... 1

Installing VISIONPRO .................................................................................... 3

Preparing for Installation ................................................................................... 3

Getting Started .................................................................................................. 3

Connecting VISIONPRO .................................................................................. 4

Power On VISIONPRO ..................................................................................... 6

Configuring VISIONPRO ................................................................................ 9

Test Calls ........................................................................................................ 14

Matrix VISIONPRO Quick Start 1

Know Your VISIONPRO

Thank you for choosing the Matrix VISIONPRO. Please read the instructions in this Quick Start

carefully to install and configure it.

This Quick Start is meant to help you install and configure the VISIONPRO quickly. For detailed

instructions on configuring the product and its feature description, refer to the System Manual.

To view or download the documents, scan the QR Code printed on the Product Label/Packaging

Label. You can also view or download the documentation from https://www.matrixtelesol.com/

product-manuals.html

For product registration and warranty related details, please visit http://www.matrixcomsec.com/

product-registration-form.html

Overview

Matrix VISIONPRO is an integrated digital SOHO (Small Office Home Office) PBX which caters to

the communication requirements of small businesses.

VISIONPRO series from Matrix offers the following variants,

• VISIONPRO 206 with 2 CO Trunk Ports (FXO Ports) and 6 SLT Ports (FXS Ports).

• VISIONPRO 308 with 3 CO Trunk Ports (FXO Ports) and 8 SLT Ports (FXS Ports).

• VISIONPRO 412 with 4 CO Trunk Ports (FXO Ports) and 12 SLT Ports (FXS Ports).

2 Matrix VISIONPRO Quick Start

This Quick Start is written with reference to the default configuration, VISIONPRO 308, unless

otherwise specified.

Ports and Connectors

LED

Port Description

Power Port To connect the external power adapter of 12V DC (input).

Earth To connect the telecom earth to the system.

CO To connect the CO trunk lines from PSTN.

SLT To connect station SLT phones, FAX machines.

RESET To reset the SE/SA Password to its default value.

LED Description

PWR To indicate system power ON/OFF condition.

STS To indicate the system status during various conditions.

Matrix VISIONPRO Quick Start 3

Installing VISIONPRO

Preparing for Installation

You must have the following:

• A suitable location to install VISIONPRO.

• Necessary telecom wiring in place, with wall jacks for station lines at the required locations.

• Standard, good quality, twisted pair telephone cables with 0.5 mm conductor diameter.

• A dedicated Power supply outlet close to the system.

• As many standard analog telephone instruments with CLI display to connect as SLT stations.

• A fax machine, if you want to connect one to the SLT Port of VISIONPRO.

• One or more active, analog trunk lines from the CO network, as required.

Well begun is half done; plan your hardware installation well.

• Do not install this product near an area where-

• it is exposed to direct sunlight, heat, excessive cold or humidity, dust, oil, corrosive

fumes.

• there is a water source (wash basin, tub, shower, pool, sprinkler etc.)

• there is source of electromagnetic noise such as radio equipment, heavy transformers,

faulty electric chokes of tube-lights, device having a faulty coil.

• Ensure proper electrical earth and telecom earth for the safety of the product and persons

handling it.

Getting Started

Unpack VISIONPRO and verify your package contents. In case any of the items is missing or

damaged, contact your Dealer/Distributor.

4 Matrix VISIONPRO Quick Start

Package Contents

The ideal sales package for VISIONPRO should contain the following items:

• One VISIONPRO Unit

• A 12V Power Adapter

• A Wall Mounting Template

• Two Screw Grips

• Two M7/30 Screws

You can view or download the documentation of the product by scanning the QR code printed on

the Product Label/Packaging Label.

Connecting VISIONPRO

Matrix VISIONPRO Quick Start 5

To connect the CO cables to the VISIONPRO,

• Use standard, good quality, twisted-wire pair telephone cables to connect the CO Ports of

VISIONPRO to the Trunk Lines from the CO (central office) network.

• Strip off about half a centimeter of the insulation off the wire ends of the CO cable.

• Using a blunt pin or a small flat screw driver, push back the levers of the connector.

• Insert the stripped ends of the two wires into the two openings of the connector, with one wire

in each opening.

• Ensure that both wires fit neatly into the opening.

• Release pressure on the levers. Both wires will be held in place by spring clamp action.

If you need to remove the wires,

• Push back the levers.

• Pull out the wires gently.

• Release pressure on the levers.

To connect the SLT cables to the VISIONPRO,

• Use standard twisted wire pair cables of good quality to connect the analog single line

telephone instruments to the SLT Ports of VISIONPRO.

6 Matrix VISIONPRO Quick Start

• Place the SLTs, fax machine at the desired locations. Connect the SLTs, Fax machine to the

wall jacks.

• Terminate one end of the cable on the wall jack to which the SLT, fax machine is connected.

• From the other end of the wire, strip off about half a centimeter of the insulation.

• Using a blunt pin or a small flat screw driver, push back the levers of the connector.

• Insert the stripped ends of the two wires into the two openings of the connector, with one wire

in each opening.

• Ensure that both wires fit neatly into the opening.

• Release pressure on the levers. Both wires will be held in place by spring clamp action.

If you need to remove the wires,

• Push back the levers.

• Pull out the wires gently.

• Release pressure on the levers.

Power On VISIONPRO

• Check the mains voltage at the power plug from where the power supply is to be fed to the

system.

• Make sure system’s earthing is proper.

• Plug in the power adapter of VISIONPRO into the power outlet. Ensure proper contacts.

Switch ON the system. Observe the reset cycle on the front panel of the system.

Reset Cycle

• As soon as you power ON the system, the PWR (Power) LED on the front panel starts

glowing. The STS (Status) LED starts glowing approximately 5 seconds after power ON.

Thereafter, the STS LED blinks in a cadence of 1sec ON and 1sec OFF.

• The system also feeds Dial Tone to the stations.

• Check for Dial Tone on the telephone instruments connected to the system.

Altri manuali per Visionpro

Indice

Altri manuali Matrix Centralino

Matrix

Matrix Vision Guida utente

Matrix

Matrix ETERNITY Manuale utente

Matrix

Matrix PROTON 103 Manuale utente

Matrix

Matrix ETERNITY NE Guida utente

Matrix

Matrix Visionpro Guida utente

Matrix

Matrix ETERNITY Manuale elenco delle parti

Matrix

Matrix ETERNITY NE Manuale utente

Matrix

Matrix ETERNITY NE Manuale utente

Matrix

Matrix ETERNITY ME Manuale utente

Matrix

Matrix ETERNITY NE Manuale utente

Manuali Centralino popolari di altre marche

Allo.com

Allo.com Nano 2 Manuale utente

ZYCOD

ZYCOD ZX50 Manuale utente

Panasonic

Panasonic KX-TDA100BX Manuale utente

LV switch

LV switch IPPBX800 Manuale di istruzioni

Edge-Core

Edge-Core VST3305 Manuale utente

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manuale utente

Rauland-Borg

Rauland-Borg Telecenter IV Manuale utente

Grandstream Networks

Grandstream Networks UCM6208 Manuale utente

ATCOM

ATCOM IPPBX IP02 Manuale utente

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Manuale utente

bintec elmeg

bintec elmeg elmeg hybird 600 Manuale utente

Panasonic

Panasonic KX-NS300 Manuale utente

MCK

MCK EXTender PBXgateway Manuale utente

Panasonic

Panasonic KX-NS300CN Manuale del proprietario

NEC

NEC SL1000 Manuale utente

Epygi

Epygi Quadro Quadro 2xi Manuale utente

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Manuale utente

AGFEO

AGFEO AC 14 analog Manuale utente