Maytag Performa PCF1700ACW Manuale utente
REFRIGERATOR
INSTRUCTION MANUAL
Thank you for selecting this refrigerator.
Before using this refrigerator, please read this manual carefully.
Model No.
PCF1700ACW / PCF2700ACW / PCF4400ACW
PCF1700ACB / PCF2700ACB / PCF4400ACB
2
NAMES OF THE PARTS
1
314 7 86 9
PCF1700ACW
PCF1700ACB PCF4400ACW
PCF4400ACB
7 2 4 3 6 9 8 5
1
PCF2700ACW
PCF2700ACB
1. EVAPORATOR
The heart of the refrigerator.
It evaporates the refrigerant fluid and thereby absorbs heat from the surrounding. Made of
pure aluminum.
2. DRAIN PAN (Use of Defrost Only)
Discards the water that drips of the evaporator when defrosting.
3. CONTROL BOX :
Regulates the operation of the motor and controls the inside temperature of the refrigerator.
4. SHELF Has full width and can slide out.
5. RACK For butter and small size goods.
6. MAGNETIC DOOR SEALS
Keeps the refrigerator virtually airtight all along the edge, but is nevertheless easy to open.
7. ICE CUBE TRAY Ice cubes are easy to remove from the tray.
8. USABLE RACK for cans or jars.
9. BOTTLE RACK for bottles, cans or jars.
10. CRISPER for vegetables and fruits.
11. SLIDE OUT CRISPER COVER.
12. CAN DISPENSER
43
HOW TO OPERATE
1. Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the inside with
a damp cloth.
2. Keep the door open and insert the power supply cord into the socket.
3. Turn the thermostat dial to “7”. Close the door and let the refrigerator operate for 15-20
minutes.
The freezer should then show some traces of frost.
You can control the inside temperature by turning the
thermostat dial. Higher numbers mean greater cooling
power, smaller numbers mean less cooling power. To
make ice cubes in the freezer compartment, set the dial
to “7”. The dial does not have to be set exactly on the
numbers, but can be any place in between.
Defrost the refrigerator when the frost accumulated on the evaporator is about
5mm(1/5inch) thick.
Set the thermostat dial to “OFF”. Remove foods. Keep drip tray in place. Defrosting usually
takes a few hours. To defrost quickly remove all foods from the refrigerator and leave door
open. Never use a knife or other metal instrument to remove ice/frost from the evaporator.
After defrosting empty water from drip tray, return the thermostat dial to the desired position
to start refrigerating again.
6
7
5
4
3
2
1
OFF
C
O
L
D
E
R
TEMPERATURE
CONTROL
NOTE : Wait 3 to 5 minutes before restarting if you unplug the machine. Unit
may fail to operate properly if restarted too quickly.
Temperature control
Starting your new Refrigerator
How to defrost
HOW TO CLEAN
Cleaners: The cleaners noted below are available. Never use harsh, abrasive cleaners, heavy-
duty cleaners, or solvents on any surface.
Exterior: Wipe with damp, sudsy cloth, rinse and dry. For stubborn stains and for periodic
waxing, use silicon wax.
Evaporator: When refrigerator needs defrosting turn thermostat dial to “OFF”. Do not use
sharp instruments.
Refrigeration Section: Wash shelves and other removable parts in warm sudsy water,
rinse and dry. Wash interior with baking soda solution (3 table spoons to one quart of water)
or warm sudsy water, rinse and dry.
Magnetic Door Seals: Wash with warm sudsy water.
The Finishing Touch: Replace all parts and return thermostat dial to desired setting.
▶Install refrigerator in a convenient location away from extreme heat and cold.
Allow sufficient clearance between the refrigerator and side wall so the door will
open for a fully usable interior. Refrigerator is not designed for recessed
installation.
▶Select a place with strong level floor.
▶Allow 5 inches of space between the
refrigerator’s side and the wall.
HOW TO INSTALL
5
inches
65
WHAT TO DO...
1. When out of operating for a long time:
•Remove the power supply cord.
•Dry your refrigerator opening the door for 2-3 days.
2. When you get ready to move:
•Securely fasten removable interior parts (or move and package them separately)
•Do not lay your refrigerator horizontally, or compressor may be damaged.
When you need service: Before you call for service make sure
you need it, check a few things noted below for
yourself first.
If refrigerator is not operating:
•Is the power supply cord unplugged?
•Is home fuse blown or circuit breaker off?
If refrigerator is warmer than usual:
•Has the door been open frequently or for a long period?
•Is refrigerator overcrowded-preventing good air circulation?
•Is the hot thing stored without cooling?
•Is the clearance between refrigerator’s side and the wall allowed sufficiently?
If there are unusual sounds:
•Is refrigerator placed on the level?
•Are foreign objects behind the refrigerator?
•Are dishes on refrigerator shelves vibrating?
If so, rearrange the dishes.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a simmilary qualified person in order to avoid a hazard.
This refrigerator has been built with the door hinges on the right.
If you wish to change the opening direction, follow the instruction below:
•Unplug the refrigerator from its electrical outlet.
•Empty everything in the refrigerator, including shelves, food, etc.
1. Remove the hinge cover on the right top of the
cabinet.
2. Remove the two screws (using a ratchet tool
with a 8MM socket) that hold the top hinge to
the cabinet. Keep these screws for later use.
3. Lift the top hinge straight up to free the pin
from the socket on the top of the door.
4. Lift the door and place it on a padded surface
to prevent scratching it.
5. Remove the plug buttons from the upper left
holes as illustrated and transfer them to the
uncovered holes at the right side. Be sure to
press the plug buttons firmly into the holes.
6. Lay the cabinet on its side down on the floor.
Remove the two screws that hold the bottom
hinge to the cabinet using a 10MM socket.
Keep these screws and washer for later use.
Top hinge
Hinge cover
Plug button
Bottom hinge
CHANGING THE REVERSIBLE DOOR
7
7. Insert the bottom hinge at the left side using
the two screws previously removed in step 6.
NOTE:Do not tighten screws.
8. Stand the cabinet.
9. Replace the door making sure the bottom
socket enters the bottom hinge pin.
Be sure washer is in place.
10. While holding the door in the closed position,
secure the top hinge at the left side using the
two screws previously removed at the
beginning in step 2.
Do not tighten the screws until the top of the
door is leveled with the top cabinet.
11. Replace the hinge cover.
12. Tools required:
-8MM & 10MM socket-ratchet.
-Putty knife or thin-blade screwdriver.
Altri manuali per Performa PCF1700ACW
1
Questo manuale è adatto per i seguenti modelli
19
Indice
Altri manuali Maytag Frigorifero
Maytag
Maytag MTB1946BEA Manuale utente
Maytag
Maytag MSF22D4XAM Manuale utente
Maytag
Maytag MFT2976AE Series Manuale elenco delle parti
Maytag
Maytag MSD2559XEB Istruzioni per il montaggio
Maytag
Maytag 12828102 Manuale utente
Maytag
Maytag RTD21A Istruzioni per l'installazione
Maytag
Maytag MFX2570AEB Istruzioni per il montaggio
Maytag
Maytag MBF1956KEW11 Manuale utente
Maytag
Maytag MSB27C2XAM Manuale utente
Maytag
Maytag MSD2652KEW - 26 cu. Ft. Refrigerator Manuale utente
Maytag
Maytag MSD2242VEB Manuale utente
Maytag
Maytag MFI2665XEB Istruzioni per il montaggio
Maytag
Maytag MFW2055YEB00 Manuale utente
Maytag
Maytag MFF2558VEQ - 24.8 cu. Ft. Refrigerator Guida alla risoluzione dei problemi
Maytag
Maytag MFI2269VE Series Manuale elenco delle parti
Maytag
Maytag W10359302A Manuale utente
Maytag
Maytag MFF2258FEZ Manuale utente
Maytag
Maytag MSD2554VEA - 25 cu. Ft. Refrigerator Guida alla risoluzione dei problemi
Maytag
Maytag MTF2142EEW - 21.0 cu. Ft. Top-Freezer... Manuale utente
Maytag
Maytag W10321479A Manuale utente
