McDSP 6060 Manuale utente
McDOWELL SIGNAL PROCESSING, LLC
User Manual
6060
Ultimate Module Collection
Page ii
McDSP 6060 Ultimate Module Collection
Plug-in Manual
McDSP
McDowell Signal Processing, LLC
2083 Old Middlefield Way #204
Mountain View, CA 94043
Support
Email: [email protected]
World Wide Web: www.mcdsp.com
mcdsp.com Page iii
McDSP NR800
Special Thanks to:
• All the customers that kept asking McDSP for more modules.
from Colin and the entire McDSP team.
Copyright Notice:
Copyright 1998-2019 McDowell Signal Processing, Limited Liability Company
All Rights Reserved. The McDowell Signal Processing, Limited Liability Company’s 6060 Ultimate Module
Collection Plug-In and corresponding User’s Manual is copyrighted and all rights are reserved. Information
in this document is subject to change without notice and does not represent a commitment on the part
of McDowell Signal Processing, Limited Liability Company. This document may not, in whole or part, be
copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable
form for the purpose of resale without prior consent, in writing, from McDowell Signal Processing, Limited
Liability Company.
Trademarks:
McDSP is a trademark of McDowell Signal Processing, LLC.
All other product and company names are trademarks or registered trademarks of their respective holders.
Page iv
Table of Contents
McDSP 6060 Ultimate Module Collection Plug-in
Manual ii
McDSP License Agreement vii
Getting Started with 6060 ix
System Requirements ix
Installing the 6060 Plug-in x
Installation on Mac OS X x
Installation on Windows xi
Installation on VENUE S6L Systems xi
Authorizing your McDSP Plug-ins xiii
Authorizing with the iLok License Manager xiii
Demos xiii
Redeeming License Codes xiv
Registering Your McDSP Plug-in xiv
Using Your McDSP Plug-ins xv
Starting a McDSP Plug-in xv
Exiting a McDSP Plug-in xv
6060 Ultimate Module Collection UMC1
The Quick Start Tour: The 6060 Plug-in UMC2
6060 Overview UMC3
Controls UMC6
Module Selector Section UMC6
Input Section UMC6
EQ Modules UMC7
COMP (Compression) Modules UMC7
MORE Modules UMC8
Output Section UMC8
Displays UMC9
Module Metering UMC9
General Information UMC10
mcdsp.com Page v
McDSP NR800
Control Linking UMC10
Automation UMC10
Presets: Using the Presets and Making Your Own UMC10
Using the 6060 UMC11
Basics UMC11
EQ UMC11
Compression UMC11
More UMC11
A Closer Look - EQ Modules UMC12
E671 UMC12
Moo Q UMC12
iQ UMC12
E300/E301 UMC13
British-E UMC13
EZ Q UMC13
EQ’76 UMC14
FRG EEE UMC14
E357 UMC14
E404 UMC15
A Closer Look - Compression Modules UMC16
C671 UMC16
MT2 UMC16
Opto-C3/Opto-L3 UMC17
BC-23 UMC17
Over EZ3 UMC18
SST’78 UMC18
FRG446 UMC18
D359 UMC19
A Closer Look - More Modules UMC20
EZG UMC20
iX UMC20
FRGX UMC20
S671 UMC21
Moo-D UMC21
D-100 UMC21
SOS UMC22
Page vi
BOB UMC22
TAPE UMC22
SHINE UMC23
GC-1 UMC23
PDQ UMC24
A Closer Look at the 6060 Plug-in UMC25
Module Section UMC25
Module Processing Order UMC25
Split Input Mode UMC25
Key Signal Options UMC26
6060 Applications UMC27
Parallel Processing UMC27
Multi-Stage Processing UMC27
Drums UMC27
Vocals UMC28
Guitar, Keys, Beats, and More UMC28
6060 Plug-in Reference Guide UMC29
6060 Specifications UMC29
DSP Delay UMC33
DSP Usage UMC33
Pro Tools™HDX hardware UMC33
Maximum Instantiation Counts at 48kHz UMC33
mcdsp.com Page vii
McDSP
McDSP License Agreement
The software described in this manual is furnished under a license agreement and may be used only in
accordance with the terms of the agreement.
McDowell Signal Processing, Limited Liability Company License and
Warranty:
The software which accompanies this license (the “Software”) is the property of McDowell Signal
Processing, Limited Liability Company or its licensers and is protected by copyright law. While McDowell
Signal Processing, Limited Liability Company continues to own the Software, you will have certain rights to
use the Software after your acceptance of this license. Except as may be modified by a license addendum
which accompanies this license, your rights and obligations with respect to the use of this Software are as
follows:
You May:
• authorize 1 (one) copy of the Software on 1 (one) PACE Anti-Piracy iLok USB Smart Key or iLok Cloud
session, for use with no more than 1 (one) computer at any given time;
• make copies of the Software for archival purposes, or copy the software onto the hard disk of your
computer and retain the original for archival purposes;
• after written notice to McDowell Signal Processing, Limited Liability Company, transfer the Software on
a permanent basis to another person or entity, provided that you retain no copies of the Software and
the transferee agrees to the terms of this agreement
You may not:
• copy, duplicate, or reproduce the documentation which accompanies the Software for the purpose of
resale;
• sublicense, rent or lease any portion of the Software to a third party without expressed written
permission from McDowell Signal Processing, LLC;
• reverse engineer, de-compile, disassemble, modify, translate, make any attempt to discover the source
code of the Software, or create derivative works from the Software;
• make any attempt to circumvent any copy protection software;
• use a previous version or copy of the Software after you have received a replacement set or an upgraded
version as a replacement of the prior version, unless you donate a previous version of an upgraded
version to a charity of your choice, and such charity agrees in writing that it will be the sole end user
of the product , and that it will abide by the terms of this agreement. Unless you so donate a previous
version of an upgraded version, upon upgrading the Software, all copies of the prior version must be
destroyed.
Page viii
Limited Warranty:
McDowell Signal Processing, Limited Liability Company warrants that the media on which the Software
is distributed will be free from defects. Your sole remedy in the event of a breach of this warranty will be
that McDowell Signal Processing, Limited Liability Company will, at its option, replace any defective media.
McDowell Signal Processing, Limited Liability Company does not warrant that the Software will meet your
requirements or that the operation of the Software will be uninterrupted or that the Software will be
error-free. THE ABOVE WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON INFRINGEMENT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
Disclaimer of Damages:
REGARDLESS OF WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE, IN NO
EVENT WILL McDowell Signal Processing, Limited Liability Company BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, INCLUDING ANY LOST PROFITS OR LOST DATA ARISING
OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF McDowell Signal Processing, Limited Liability
Company HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO CASE SHALL McDowell Signal Processing,
Limited Liability Company’s LIABILITY EXCEED THE PURCHASE PRICE FOR THE SOFTWARE. The disclaimers and
limitations set forth above will apply regardless of whether you accept the Software.
U.S. Government Restricted Rights:
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the Government is subject to restrictions as
set forth in subparagraph (c) (1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS
252.227-7013 or subparagraphs (c)(1) and (2) of the Commercial Software Restricted Rights clause at 48 CFR
52.227-19, as applicable, McDowell Signal Processing, Limited Liability Company, Mountain View, CA 94043
General:
This Agreement will be governed by the laws of the State of California. This Agreement may only be modified
by a license addendum which accompanies this license or by a written document which has been signed both
by you and McDowell Signal Processing, Limited Liability Company. Should you have any questions concerning
this Agreement, or if you desire to contact McDowell Signal Processing, Limited Liability Company for any
reason, please email: [email protected]. By downloading, using, or copying this Binary Software, Licensee
agrees to abide by the intellectual property laws, and all other applicable laws of the U.S., and the terms of
this License. Ownership of the software shall remain solely in McDowell Signal Processing, Limited Liability
Company.
mcdsp.com Page ix
Getting Started
Getting Started with 6060
Each McDSP plug-in is delivered inside an installer application, and uses an iLok2,
iLok3, or iLok Cloud session to authorize each plug-in.
System Requirements
McDSP HD and Native plug-ins are compatible with Pro Tools, Logic X, Cubase,
Nuendo, Abelton Live, MOTU Digital Performer, Studio One, Sonar, and other
DAWs that support AAX, AU, VST and/or VST3 plug-in formats.
McDSP Native plug-ins support AAX Native, AU, VST, and VST3 plug-in formats.
McDSP HD plug-ins additionally support the AAX DSP plug-in format, as well as
AAX Native, AU, VST, and VST3 plug-in formats. McDSP plug-ins support Mac OS
10.8.5 (Mountain Lion),Mac OS 10.9.5 (Mavericks), 10.10.x (Yosemite), 10.11.x (El
Capitan), 10.12.x (Sierra), 10.13.x (High Sierra), and Windows 7, 8, and 10.
McDSP plug-ins require an iLok2 or iLok3 USB Smart Key, or an iLok License
Manager account and an iLok Cloud session for authorization.
McDSP AAX plug-ins require Windows 7 or later, Mac OS 10.8.5 or later, and
support Pro Tools 10.3.8 or later, Pro Tools 11.1.3 or later, Pro Tools 12.x or later,
and Pro Tools 2018.x or later.
McDSP AU plug-ins require Mac OS 10.8.5 or later, and support Logic X, Digital
Performer, Abelton Live, and other AU compatible DAWs.
McDSP VST and VST3 plug-ins require Windows 7 or later, Mac OS 10.8.5 or later,
and support Cubase 8.x or later, Cubase 9.x or later, Nuendo 6.5.x or later, and
other VST and VST3 compatible DAWs.
McDSP HD plug-ins also support the VENUE S6L systems.
Please visitmcdsp.comfor the latest compatibility information.
Page x
Installing the 6060 Plug-in
Installation on Mac OS X
The 6060 plug-in package includes this manual, ReadMe and Release Notes, a
folder of presets for the 6060 plug-in, and the 6060 plug-in. Two copies of the
6060 Licensing Agreement are included - one in this pdf manual and a second
as a separate text file. The 6060 plug-in manual requires that Adobe Acrobat
reader (or similar .pdf reader) is installed.
The authorization of the 6060 plug-in is still required after running the installer,
and those steps are detailed in the following sections.
Installing the 6060 plug-in and presets with the Installer:
The online version of the package has been prepared for Internet delivery, and is
transmitted as a compressed file in zip format (.zip). Simply double click the zip
file to unpack the installer.
• Run the 6060 plug-in Installer application to install (copy) the 6060 plug-in,
presets, and documentation to a local folder on your system. The plug-in will
be placed in the ‘Plug-ins’ folder, and the presets will be placed in the ‘Plug-
ins Settings’ folder.
• If a previous version of the 6060 plug-in (or other HD, Native, or LE version)
was already in the plug-ins folder, it will automatically be updated (or
replaced) by the installer.
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
