Mecon Zone-Lux Manuale utente
Zone-Lux®
OPERATING INSTRUCTION
© MECON GmbH BA/ Zone-Lux®/ EN /
23-05
2© MECON GmbH BA/ Zone-Lux® / EN / 23-05
IMPRINT
All rights reserved. Without the prior written authorisation of MECON GmbH every form
of reproduction of this documentation, regardless of method, including excerpts, is for-
bidden.
We reserve the right to make changes without prior notice.
Copyright 2023 by MECON GmbH - Roentgenstr. 105 - 50169 Kerpen - Germany
3
© MECON GmbH BA/ Zone-Lux® / EN / 23-05
Content
..............................................................................................
.......................................................................................................................
.............................................................................................................................
............................................................................................................
.....................................................................
.................................................................................................................
.............................................................................
................................................................................................................
............................................................................................................................
.............................................................
........................................................................................
...........................................................................................................................
.........................................................................................................
..............................................................................................................
.........................................................................................................
General remark on electrical installation ..................................................................
...................................................
Connecting the Zone-Lux®to the key switch..........................................................
..........................................................................................................
®...............................................................
....................................................................................
..................................................................................................
..............................................................................................................................
............................................................................................................................
.........................................................................................................................
.................................................................................................................................
........................................................................................................................
..................................................
................................................................................................................................
.................................................................................................................
.............................................
4© MECON GmbH BA/ Zone-Lux® / EN / 23-05
1
1.1 Intended use
With the Zone-Lux®-
the pump without need to empty the sprinkler group.
to test proper functionality when one or more sprinklers are triggered.
Warning!
Responsibility for the use of the testing system in respect to suitability,
intended use, and in particular the corrosion resistance of the used mate-
rials in relation to the medium, lies with the user alone. In particular, care
must be taken to ensure that the chosen materials of the parts of the test-
ing system in contact with the medium are suitable for the medium used.
The manufacturer is not liable for damage which occurs through improper
use of this testing system or use it is not intended for.
The testing system may only be used within the pressure, temperature and
supply voltage limits specied in the operating manual. Before replacing a
testing system it is always necessary to check whether the testing system
is free of hazardous media and pressures. If you return testing systems to
MECON GmbH, please observe the “form for device returns“ in the Inter-
net under www.mecon.de/en/device-returns/. Repairs or inspection by
MECON GmbH are not possible without this fully completed form.
5
© MECON GmbH BA/ Zone-Lux® / EN / 23-05
1.2 Approvals
1.3 Safety instructions
for these tasks.
Work on electrical connections may only be performed by persons who are
qualied and licensed to perform these tasks.
Only activate the power supply after the full installation is completed.
When doing maintenance work, the power supply is to be switched o over
the fuse installed in the unit.
1.4 Safety instructions of the manufacturer
-
indirectly, and incidentally.
the relevant product documentation and the general terms and conditions.
-
es of such changes.
6© MECON GmbH BA/ Zone-Lux® / EN / 23-05
®is suitable for the particular application rests
read the information in this manual carefully before starting to use the testing system.
-
nance of the testing system.
1.5 Risk assessment
When correctly installed and operated as intended the Zone-Lux®
to a false alarm.
signalled to the user.
possible alarm forwarding system is out of operation, so it reduces the time in which the
possible to test these individually.
7
© MECON GmbH BA/ Zone-Lux® / EN / 23-05
Type
Serial no.
Nominal size and process connection
Fig. 1 Name plate
2 SCOPE
2.1 Scope of delivery
• Zone-Lux®
• Operating manuals
2.2 Nameplate
8© MECON GmbH BA/ Zone-Lux® / EN / 23-05
3
3.1 Information about installation
Information!
All testing systems have been carefully checked for proper functionality
before being shipped out. Immediately after receiving it, check the
packaging for damage or indications of improper handling.
Notify the carrier and your responsible sales employee of any possible
damage. In such cases provide a description of the problem, and the type
and serial number of the testing system.
Unpack the testing system carefully, to avoid any damage.
Use the packing list to check the completeness of the delivery. Using the
name plate, check to ensure that the testing system supplied corresponds
to your order.
The Zone-Lux®is only intended for use in wet systems.
For installation, the ambient conditions of the respective components, as
indicated in section 5, are to be observed.
Special VdS requirement: The version with roll groove connection may
only be put to use in combination with VdS-approved pipe couplings from
the manufacturers Anvil (all Gruvlok mechanical grooved pipe couplings),
Jinan Meide (casting couplings type 1G), Minimax, Modgal, Tyco (all Grinell
Mechanical and G-Fire steel IPS pipe couplings) and Victaulic.
9
© MECON GmbH BA/ Zone-Lux® / EN / 23-05
3.2 Installation
A gap corresponding to the installation dimension must be provided for between the
pipe ends of the sprinkler group where the Zone-Lux®
-
lines that are used.
®
air-venting of the pump, so it is recommendable.
10 © MECON GmbH BA/ Zone-Lux® / EN / 23-05
Fig. 2 Main pipe overview
Number
» 1»Pump
»2 »Main pipe
»3 »
»4 »Ball valve, 3/4 internal/external thread
»5 »90° elbow, 3/4 internal/external thread
»6 »
»7 »Ball valve, 1/2 internal/external thread
»8 »
»9 »
Tab. 1 Zone-Lux®components
Indice
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
