Medeli DD401 Manuale utente

VOLUME

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:04

INFORMATION FOR YOUR SAFETY!

THE FCC REGULATION WARNING (for USA)

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

Unauthorized changes or modification to this system can

void the user’s authority to operate this equipment.

CAUTION

The normal function of the product may be disturbed by

Strong Electro Magnetic Interference. If so, simply reset

the product to resume normal operation by following the

owner’s manual. In case the function could not resume,

please use the product in other location.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

Power Supply

Please connect the designated AC adaptor to an AC outlet

of the correct voltage.

Do not connect it to an AC outlet of voltage other than that

for which your instrument is intended.

Unplug the AC power adaptor when not using the

instrument, or during electrical storms.

Connections

Before connecting the instrument to other devices, turn off

the power to all units. This will help prevent malfunction and

/ or damage to other devices.

Location

Do not expose the instrument to the following conditions to

avoid deformation, discoloration, or more serious damage:

Direct sunlight

Extreme temperature or humidity

Excessive dusty or dirty location

Strong vibrations or shocks

Close to magnetic fields

Interference with other electrical devices

Radios and televisions placed nearby may experience

reception interference. Operate this unit at a suitable

distance from radios and televisions.

Cleaning

Clean only with a soft, dry cloth.

Do not use paint thinners, solvents, cleaning fluids, or

chemical-impregnated wiping cloths.

Handling

Do not apply excessive force to the switches or controls.

Do not let paper, metallic, or other objects into the

instrument. If this happens, unplug the AC adaptor from the

wall outlet. Then have the instrument inspected by qualified

service personnel.

Disconnect all cables before moving the instrument.

CAUTION

Under the environment with electrostatic discharge

and radio interference field, the sample may malfunction

and need user power reset to recover sometimes.

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:05

Contents

QUICK START ADVANCED USE APPENDICES

Panel & Display Description

Front Panel.................................................................4

Rear Panel..................................................................4

QUICK START

Setup

Connecting Pads and Pedals......................................5

Connections

Connecting an Audio Equipment.................................6

Connecting a set of Headphones................................6

Connecting an MP3/CD Player...................................6

Connecting a Computer..............................................6

Power Supply & Switch...............................................6

Performing

Operation Feature.......................................................7

Playing the Pads.........................................................7

Selecting a Drum Kit...................................................7

Playing along with Patterns.........................................8

Using the Metronome/Click Feature...........................8

Adjusting the Tempo...................................................8

Coach/Beat Check......................................................9

ADVANCED USE

Playing with Drum Kit

About the Drum Kits..................................................10

Selecting a Drum Kit.................................................10

Adjusting the Volume of a Drum Kit..........................10

Setting the Metronome

About Metronome......................................................11

Switching the Click on/off..........................................11

Adjusting the Click Volume........................................11

Adjusting the Click Tempo.........................................11

Selecting the Click Voice...........................................11

Setting the Time Signature........................................12

Setting the Interval....................................................12

Playing Back Pattern

About Patterns..........................................................13

Selecting a Pattern....................................................13

Adjusting the Pattern Volume....................................13

Practicing in Coach Mode

About Coach Mode...................................................14

Coach Mode Control …….........................................14

Judging your Timing accuracy by Indicates..............14

Beat Check……….....................................................15

Gradual up/down……………...….……......................16

Change UP………………...………....…....................17

Follow Me……………...………....….....…..................18

Drum Mute……………...………....….....…................19

Making the Setting for MIDI

About MIDI................................................................20

Connecting with an External Sound Device..............20

Using the Digital Drum as a Sound Module..............20

Troubleshooting................................................21

Specifications.....................................................21

APPENDICES

Kit List.......................................................................22

GM Kit List................................................................23

GM Backing Instrument List......................................24

Pattern List................................................................25

Loop List...................................................................26

MIDI Implementation Chart.......................................27

Playing Back a Pattern..............................................13

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:06

Panel Description

Front Panel

1. POWER Button

Use this button to turn the drum module on and off.

2. VOLUME Knob

Adjusts the volume of headphone and line output.

3. CLICK Button

Turn the metronome on or off.

4. START/STOP Button

Start or stop playing patterns.

5. + Button, - Button

These buttons are used to change values when

editing. The + button increases the value, and the

- button decreases it.

6. PATTERN Button

Enter the Pattern mode.

7. TEMPO Button

Adjust the current tempo.

8. PATTERN + TEMPO Button

Press the PATTERN and TEMPO buttons

simultaneously to enter the Coach mode.

9. 1~5/VARIATION Buttons

Enter the Kit mode and choose a kit.

Choose a coach type in the Coach Mode.

Rear Panel

10.

This stereo jack is used to connect the

headphones to this unit.

11. AUX IN Jack (1/8”)

This stereo input jack is for an external sound

source, such as an MP3 or CD player.

12. LINE OUTPUT Jacks(1/4")

Stereo output connection to an audio system or

drum amplifier.

13. USB Connector

This port is used to connect to a computer

(MIDI In/Out via USB).

14. DC IN Jack

Connect the included DC 9V power adaptor.

15. PAD Connectors

Input connections for Snare, Toms, Cymbal Pads,

Hi-Hat pedal and Kick pedal.

PHONES Jack (1/8”)

CLICK + 1: Enter the click voice menu.

CLICK + 2: Enter the time signature menu.

CLICK + 3: Enter the interval menu.

VOLUME

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:06

Setup

Caution!

To prevent electric shock and damage to the device, make sure the power is switched

OFF on the drum and all related devices before making any connection.

Connecting Pads and Pedals

Standard: KICK, SNARE, TOM1-3, CRASH, RIDE, HI-HAT and HI-HAT PEDAL.

Using the provided cables to connect with kick pedal, snare, tom1~tom3, ride, crash, hi-hat and hi-hat pedal. These pads and

pedals are all mono input and velocity sensitive.

Note:

For details on assembling the drum stand, attaching the digital drum and connecting pads, refer to the Installation manual.

Drum Module

hi-hat

crash ride

tom1 tom2

snare

hi-hat pedal kick

tom3

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:07

Connections

Connecting an Audio Equipment

When using an amplifier, connect the Output L/MONO and R jacks on

the rear panel to the input jack of the amplifier.

Note:

Turn off the power of all devices before you make connections.

For mono playback, use the L/MONO jack.

For stereo playback, connect both L/MONO and R jacks.

The line output volume is controlled by the VOLUME knob.

Connecting a set of Headphones

An optional set of stereo headphones can be connected to the

PHONES jack located on the rear panel of the drum module.

The headphones output volume is controlled by the VOLUME knob too.

Connecting an MP3/CD Player

Connect the audio output of an MP3/CD player or other audio source to

the stereo AUX IN jack on the rear panel.

The input signal is mixed with the drum signal, allowing you to play

along.

Connecting a Computer

By connecting a computer to the USB terminal, you can transfer MIDI

data between the module and the computer.

Power Supply & Switch

Connect the power adaptor to the DC IN jack on the rear panel. After

confirming that all connections have been completed, rotate the volume

knob to the left (minimum volume level) before switching the power on.

Press the [POWER] button to turn on the power.

AUTO POWER OFF

The digital drum will automatically turn off the power, if there is no

operation for about 30 minutes.

Press the [START/STOP] button and then turn on the power to switch

off the auto power off function. It will display “PoF” for a while.

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:08

Performing

Operation Feature

Enter the Volume Page

Double click the corresponding buttons, enter the Volume pages.

For example:

Double click the [PATTERN] button to enter pattern volume page.

Double click the numeric button [1] ~ [5] to enter kit volume page.

Double click the [CLICK] button to enter click volume page.

The numeric buttons (1~5) can be used as a combination with

other buttons.

In kit mode, combine the numeric buttons (1~5) with the [VARIATION]

button to select a kit.

In Coach mode, the numeric buttons (1~5) can be used to select a

coach type.

Combine the numeric buttons (1~3) with the [CLICK] button to select

the click parameter menu.

Playing the Pads

Similar to an acoustic drum kit, the digital drum responds differently to

various playing techniques and dynamics. All the pads are velocity

sensitive, and some voices change timbre depending on the striking force.

Hi-Hat

The Hi-Hat sounds varies from open to closed in response to how far the

Hi-hat pedal is pressed:

Open Hi-Hat: Strike the Hi-Hat pad without pressing the pedal.

Closed Hi-Hat: Strike the Hi-Hat pad with the pedal pressed

completely down.

Pedal Close: Press the pedal completely down without striking the

pad.

Splash: Press the pedal completely down and release it

immediately.

Click Twice

Selecting a Drum Kit

After the power is turned on, the digital drum displays the KIT menu.

As the picture shows:

1. There are 10 preset kits for your choice.

The [VARIATION] button LED remains in red: select kit 1~5 by the

numeric button 1~5.

The [VARIATION] button LED remains in green: select kit 6~10 by

the numeric button 1~5.

2. Hit the pads to play the current kit.

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:08

Performing

Playing along with Patterns

There are 30 patterns in this drum module.

1. Press the [PATTERN] button to enter pattern menu.

The [PATTER]’s LED will be lighten.

2. Press the [+] or [-] button to adjust the pattern number.

3. Press the [START/STOP] button to start/stop pattern playing.

For details on patterns playing, refer to ADVANCED USE.

Using the Metronome/Click Feature

You can switch the click sound on or off by pressing the [CLICK]

button. When the click plays at the current Time Signature and Tempo,

the beat LED will shining at the current beat point. You can set the time

signature and interval, adjust the click volume and select the click

sound in the CLICK menu.

1. Press the [CLICK] button to start the metronome.

Press the [CLICK] button again to stop the metronome.

2. Press and hold the [CLICK] button, and then press one of the

numeric buttons [1~3] to select the click menu page and press the

[+] or [-] button to adjust the value.

For details on Metronome, refer to ADVANCED USE.

Adjusting the Tempo

You can adjust the tempo of the Metronome, the current pattern, and

the current rhythm/coach pattern.

1. Press the [TEMPO] button.

2. Press the [+] or [-] button to adjust the current tempo.

3. Press the [+] and [-] buttons simultaneously to reset the current

tempo to its default value.

Note:

If there’s no operation in 4 seconds, the module will automatically

return to the previous menu page.

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:08

Performing

Coach/Beat Check

Beat Check type is designed for training your accurate beat with

metronome.

can enter the coach mode. The LED of [PATTERN] and [TEMPO]

buttons will be lighted.

In coach mode, press the [1] button.

Select the Beat Check training type.

2. Press the [START/STOP] or [CLICK] button.

Start or stop practicing. You can hit pads following with the

metronome. The 6 LEDs on the bottom of the drum module will

show your hitting accuracy.

Note:

1. You can set the beat type (3-4,4-4,etc)before start practicing; refer to

the Setting the Metronome for more details.

2. Before starting practicing, you can adjust the tempo value at the

same time.

For more about coach type, please refer to ADVANCED USE.

Press the [PATTERN] and [TEMPO] buttons simultaneously, you

On the Beat

Before the Beat

After the Beat

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:08

Playing with Drum Kit

About the Drum Kits

Selecting a Drum Kit

Adjusting the Volume of a Drum Kit

It is very easy to select a drum kit to play. What’s more, you can also

adjust the volume of each kit.

There are 10 kits in this digital drum.

Press the numeric button [1] ~ [5] with [VARIATION] button to select a

drum kit.

1. The [VARIATION] button’s back LED can toggle between red and

green by pressing the [VARIATION] button.

2. When the [VARIATION] button’s back LED in red, you can select kit

1~5 by pressing the numeric button [1] ~ [5].

3. When the [VARIATION] button’s back LED in green, you can select

kit 6~10 by pressing the numeric button [1] ~ [5].

Each drum kit has its own volume value, and it can be set

independently.

1. By double clicking the numeric button [1] ~ [5], you can select the

volume page of a kit.

2. You can adjust the volume of current kit from 0～32 by pressing the

[+] or [-] button. If there isn’t any operation more than 4 seconds,

the drum machine will automatically exit the volume page.

The default value is 28.

[VARIATION]

RED

GREEN

[1]

KIT1

KIT6

[2]

KIT2

KIT7

[3]

KIT3

KIT8

[4]

KIT4

KIT9

[5]

KIT5

KIT10

100

aw_DD401_Manual_G02_130717

2013󾾠󾾠7󾾠󾾠17󾾠󾾠 10:54:08

Indice

Altri manuali Medeli Tamburo

Manuali Tamburo popolari di altre marche

Yamaha

Yamaha RX-21 Manuale utente

Roland

Roland TD-9K Manuale utente

Sudoku

Sudoku LEXUS Manuale utente

Roland

Roland CR-80 Manuale utente

V-Drums

V-Drums V-Tour TD-9KX2 Manuale utente

Yamaha

Yamaha DTXPLORER Manuale utente

Cherub

Cherub WRW-206 Manuale utente

Opti-Med

Opti-Med JM-D1 Series Manuale utente

Roland

Roland CR-80 Manuale utente

Yamaha

Yamaha DTS70 Manuale utente

Yamaha

Yamaha DTXPRESS Manuale utente

Roland

Roland RM-2 Manuale utente

ATV

ATV aD5 Manuale utente

Alesis

Alesis DM Pro Kit Manuale utente

Roland

Roland TR-808 Manuale utente

Roland

Roland SPD-20 Manuale operativo e di manutenzione

Koma Elektronik

Koma Elektronik RH 301 Manuale utente

Roland

Roland TR-8 Manuale utente