Medeli DD504 Manuale utente
DIGITAL DRUM
Owner’s Manual
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:51
Taking Care of Your Digital Drum Set
Thank you for purchasing this digital drum module. The drum module has been
developed to act and play like a drum set but with greater ease. Before you use
the instrument, we recommend you to read through this manual.
2
Location
Power Supply
Turn the power switch OFF when the
instrument is not in use.
An AC adaptor should be unplugged
from the AC outlet if the instrument is
not be used for an extended period of
time.
Unplug the AC adaptor during electric
storms.
Avoid plugging the AC adaptor into
the same AC outlet as appliance with
electric heaters or ovens. Also avoid
using multi-plug adaptors since these
quality, operation errors, and possibly
damage.
Turn Power OFF When Making
Connections
Handling and Transport
Cleaning
Electrical Interference
Never apply excessive force to the
controls, connectors or other parts of
the instrument.
Always unplug cables by gripping the
Disconnect all cables before moving
the instrument.
Physical shocks caused by dropping,
bumping, or placing heavy objects on
the instrument can result in scratches
and more serious damage.
Clean the unit with a dry soft cloth.
A slightly damp cloth may be used to
remove stubborn grime and dirt.
Never use cleaners such as alcohol
or thinner.
Avoid placing vinyl object on top of
Do not expose the unit to the following
conditions to avoid deformation,
discoloration, or more serious
damage.
Direct sunlight.
High temperature (near a heat
source, or in a car during the day
time).
Excessive humidity.
Excessive dust.
Strong vibration
Congratulations!
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Make sure to sure use the suitable AC
adaptor, and also make sure the AC
outlet voltage at your country
matches the input voltage specified
on the AC adaptor`s label
plug firmly, but not pulling on the cable.
the unit (vinyl can stick to and discolor
the surface)
This instrument contains digital
circuitry and may cause interference
if placed too close to radio or television
receivers.If this occurs,move the instrument
further away from the affected equipment.
To avoid damage to the instrument
and other devices to which it is
connected,turn the power switches of
all related device OFF prior to
connecting or disconnecting cables.
high power consumption,such as
can result in reducing the sound
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:51
Panel Controls
- Front Panel
- Rear Panel
- Side Panel
Setup
- Connect the Pads and the Pedal
- Connect a MIDI device
- Connect an audio equipment
- Connect a CD player, etc.(Aux in jack)
- Connect Headphones
- Connect the Power supply jack
Functions
- Switch the power ON
- Set the main volume
- Select a drum kit
- Play with a Metronome
Play a Song
- Select a Song
- Listen to the Song
- Adjust the Song's volume
- Adjust the Song's tempo
- Mute a Drum part
- Play with a Click voice
- Use the lighting guide function
Create a User Drum Kit
- Set a drum voice
- Adjust the volume of Pad
- Save your drum kit voices
Setting
- Adjust the pad sensitivity
- Set the rejection for each pad
- Reverb
- Tuning
- Factory set
- ERP Function Instruction/ERP
- Making the Settings for MIDI
Specifications
Voice list
Preset kit list
Song list
MIDI implementation chart
4
4
5
5
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
10
10
10
11
11
11
11
12
12
12
13
13
13
13
14
14
15
16
16
17
Contents
3
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:51
Volume knob
Control the volume of phone and line output.
Turn it clockwise to increase the volume
and anticlockwise to decrease it.
[ save ] button
Save current kit setting to a user kit.
[ start/stop ] button
Start or stop song playing.
[ kit ] button
Display the drum kit number or reverb setting.
[ voice / volume ] button
Display the voice number, volume value or
pitch value.
3-digit LED display
Display the parameters of current menu mode.
[ song / volume ] button
Display the song number or accompaniment
volume value.
[ drum off ] button and indicator
This button is used to turn on or turn off the
percussion of song.
Beat indicator
Beat of metronome or a song is playing
[ click ] button
Turn on or off the metronome.
[ + ] and [ - ] buttons
These buttons are used to change the setting
number of kit, voice, song and adjust the Pad
volume.
Pad select buttons and indicators
Select current pad and adjust the pad volume.
When you press them, the corresponding indicator
lights up.
[ tempo - / + ] buttons
Change current tempo.
3
Panel Controls
4
Front Panel
MIDI out
9V
3
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:51
Trigger input jacks
Connect with pads, cymbals, hi-hat control,
kick trigger.
Output jacks (R, L/mono)
Connect with the amplifier or audio system.
For monaural output use the L/mono jack.
MIDI out jack
Connect with external sound module. Connect with external sound source.
Power supply jack ( DC in 9V)
Connect an AC adaptor to this jack.
Power switch
Turn the power on/off.
Aux.in jack
Phones jack
Connect with to a pair of stereo headphones to this jack.
(Connect the headphones will not mute the output jacks.)
5
Rear Panel
Side Panel
MIDI out
9V
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:51
Using the provided cables, connect each Trigger input jack on the rear panel of the module, and make sure each
pad is connected to its corresponding Trigger input jack.
Note:
1. The voice of hi-hat pad hitting is controlled by hi-hat pedal. Similar to a real drum kit, the hi-hat pad functions
as an 'open hi-hat' when the pedal is stepped. When the pedal is released, it functions as a 'closed hi-hat' .
Caution!
To prevent electric shock and damage to the device, make sure the power is switched OFF
on the drum and all related device before making any connection.
Setup
6
Connect the Pads and the Pedals
2.Choking (pinching) the cymbal's edge with the hand immediately after hitting the cymbal makes the
sound stop. Both Ride and Crash cymbals have cymbal choke. But hi-hat don't have the cymbal
choke. Choking the crash/ride edge with the hand immediately after hitting the crash/ride mutes the
crash/ride sound.
to 7 crash
to 8 hi-hat
Drum Module
to 2 snare
to 9 hi-hat
control
Hi-Hat control pedal
Kick Trigger
to 1 kick
to 5 tom 3
to 6 ride
to 3 tom 1 to 4 tom 2
MIDI out
9V
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:53
This is for you want to use an external sound module or MIDI
sequencer.
Transmit MIDI Data
1. Use a MIDI cable to connect the MIDI OUT jack on the
drum module with the MIDI IN jack on the external MIDI device.
2. This drum will output all the MIDI codes generated by pads
hitting or pedal stepping via the MIDI output connector. But
clicking and the MIDI codes in songs are excluded.
1. When you want to listen to the voices with an amplifier,
connect amplifiers with the Output L/MONO and R jacks on
the rear panel. (For monaural playback, use the L/MONO jack;
for stereo playback, connect both L/MONO and R jacks.)
2. The volume is adjusted with the VOLUME knob.
1. The audio output of a CD player, or other audio source,
to connect with the AUX IN jack on the rear panel can be
mixed with the sound of the drum. This function is convenient
that lets you play along with a favourite song.
2. The volume of the external signal is adjusted with the
VOLUME knob.
Make sure the power is switched OFF and connect the power
adaptor with the DC IN jack on the rear panel.
Note:
1. To protect the speakers, amplifier and the drum module from
damage, rotate the volume knob to the minimum volume level
before switching the power ON.
2. Make sure the power is switched OFF when connecting drum
module with external devices.
Connect the Power supply jack
MIDI OUT
MIDI Data
MIDI IN
MIDI device
Amplifier Amplifier
An optional set of stereo headphones can be connected with
the PHONES jack located on the side of the drum module.
* Adjust the volume to a comfortable level.
Connect Headphones
Connect a MIDI device
Connect a audio equipment
Connect a CD player, etc.(Aux. In jack)
7
MIDI out
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:53
Functions
After confirming all connection have been completed, rotate the
volume knob to the left ( minimum volume level) before
switching the power on.
Set the power switch to "on" position to switch on the power.
Display shows the song's number and its indicator lights up.
While hitting a pad, gradually rotate the volume knob until a
comfortable volume level is reached.
The unit comes with 35 (001-024) preset drum kits and 11 user
kits (025-035). (Reference drum Kit list : page 16.)
1. Press [ kit ] button
The current kit number appears and the Kit indicator lights.
2. Press [ + ] or [ - ] buttons to select the drum kit number
(001 - 024) you want to use.
1. Press the [ click ] button to start the metronome. The beat
indicator is flashing and the click sound begins to play.
2. Press the [ tempo + ] or [ tempo - ] buttons to set the
metronome beat.
3. Press the [ click ] button again to stop the metronome.
Adjust the volume of the click sound
Hold down the [ click ] button and press the [ + ] or [ - ] buttons
to adjust the volume of the click sound, the metronome
automatically play.
*Volume of the click sound will be reset to default once
power is on.
Song indicator
Kit indicator
Switch the power ON
Set the main volume
Select a drum kit
Play with a Metronome
8
Beat indicator
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:53
9
Play a Song
This drum module has a total of 60 preset songs.
Note: The preset song setting is 001 after you slide on power.
1. Press [ song / volume ] button.
The song indicator lights and the current song's number appears.
2. Press [ + ] or [ - ] buttons to select one of the song and listen to it.
Song numbers 001 - 060 are preset songs.
(Reference song list : page 16.)
1. Press [ start/stop ] button and the beat indicator is flashing.
The song will start playback from the beginning.
2. You can stop the song during playback by pressing the
[ start/stop ] button.
* The ASSIGN pad's indicator flashes at the first beat of each
measure.
Note: The ASSIGN pad's indicator can be lighted off by pressing
both [hi-hat control] and [kick] buttons at the same time.
Song indicator
1. Press the [ song / volume ] button to select the volume of
song. Display shows : " A XX".
(XX = level value, 00 to 31)
2. Press [ + ] or [ - ] buttons to adjust the volume of song
accompaniment.
1. Press the [ tempo + ] or [ tempo - ] buttons. D
[ tempo + ] or [ tempo - ] buttons to increase or
decrease the tempo. ( tempo value in the range of 30 to 280)
*
isplay shows
the current tempo value.
2. Press the
Holding down either a [ tempo +] or [ tempo - ] buttons to
change the setting in a high speed.
* Press [ tempo + ] and [ tempo - ] buttons at the same time
to reset the tempo to default value.
Note: About 2 seconds after you stop pressing the [Tempo]
button, display changes to show your selected song, voice
or kit number instead of tempo value.
Select a song
Listen to the song
Adjust the song's volume
Adjust the song's tempo
Beat indicator
tempo
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:54
10
1. Press [ drum off ] button. The drum off indicator lights.
The drum mute function is active.
2. Press [ start/stop ] button to playback the song. The drum part
in the song will be muted.
3. To cancel the drum mute function, press [ drum off ] button
again. The drum off indicator light goes off.
* The drum mute function can be used during song playing.
1. Press the [ click ] button to start the metronome. It will be
played with tempo.
2. Press the [ click ] button again to stop the metronome.
Note: The click voice will not stop automatically once the song
finished until you press the [ click ] button.
The lighting guide function provides you a valuable lesson to
practice or learn the drum kit with playing the preset song.
1. Select the song number you want to practice.
2. Press [ drum off ] button.
3. Press [ start/stop ] button to start song play.
4. Strike the pad in accordance with the lighting of pad's
indicators or press the hi-hat pedal and kick the bass drum
pad exactly when their indicators light.
* During song playing, you can change the Tempo(speed)
to set your desired tempo.
Drum off indicator
Mute a Drum part
Play with a the Click voice
Use the lighting guide function
* Press the [ hi-hat control ] + [ kick ] buttons
to turn off all the pad's indicator. Press the
[ hi-hat control ] + [ kick ] buttons again to
turn on all the pad's indicator.
0
5
25
75
95
100
AW_DD504_Manual_G07_150508
2015511 8:22:54
Indice
Altri manuali Medeli Tamburo
Medeli
Medeli DD401 Manuale utente
Medeli
Medeli DD620 Manuale utente
Medeli
Medeli DD522 Manuale utente
Medeli
Medeli DIGITAL DRUM Manuale utente
Medeli
Medeli MZ928 Manuale utente
Medeli
Medeli DD400 Manuale utente
Medeli
Medeli DD518DX Manuale utente
Medeli
Medeli DD508DX Manuale utente
Medeli
Medeli MZ520 Manuale utente
Medeli
Medeli DD6 Manuale utente
Medeli
Medeli DD315 Manuale utente
Medeli
Medeli DD-306 Manuale utente
Medeli
Medeli DD620 Manuale utente
Medeli
Medeli DD638DX Guida utente
Medeli
Medeli DD506 Manuale utente
Medeli
Medeli DD506 Manuale utente
Medeli
Medeli DD403 Manuale utente
Medeli
Medeli DD638DX Manuale utente
Medeli
Medeli DD61 Manuale utente
Medeli
Medeli DD402 Manuale utente
