Medxing IRT101B Manuale utente

Please read the user manual carefully before using this device.

Table of Contents

1. Important Safety Instructions ............................................................................................................. 2

2. Device Introduction ............................................................................................................................. 2

3. Working Mode ...................................................................................................................................... 3

3.1 OFF mode .................................................................................................................................... 3

3.2 MEASUREMENT mode ............................................................................................................... 3

3.3 TIME/AMBIENT mode.................................................................................................................. 3

3.4 SETTING mode............................................................................................................................ 4

4. Preparation before Use ....................................................................................................................... 4

4.1 Install or replace batteries ............................................................................................................ 4

4.2 System setting.............................................................................................................................. 4

5. Temperature Measurement ................................................................................................................. 5

5.1 Ear mode...................................................................................................................................... 5

5.2 Forehead mode............................................................................................................................ 6

5.3 Ambient or object mode................................................................................................................ 6

5.4 Memory recall............................................................................................................................... 7

6. APP Software Installation and Use (Special for IRT101B) ................................................................ 8

6.1 APP software installation.............................................................................................................. 8

6.2 APP software use ......................................................................................................................... 8

7. Troubleshooting ................................................................................................................................ 9

8. Cleaning and Disinfection ................................................................................................................ 10

9. Warranty ............................................................................................................................................... 9

10. Technical Specifications .................................................................................................................. 11

11. Device Symbols ................................................................................................................................ 11

12. Electromagnetic Environment ......................................................................................................... 11

Digital Infrared Thermometer

User Manual

Model: IRT101B

BZ0487A VA.0 2014.12.16

Page 2 of 14

1. Important Safety Instructions

1) Check this device before use to ensure it has not been damaged. If yes, please stop to use it.

2) Do not immerse this device in water or other liquids.

3) Do not put this device in a low or high temperature environment for a long time.

4) Do not touch the probe tip with finger. Do not blow the probe with mouth.

5) Do not open, alter or repair this device by yourself. Do not impact, drop, trample and shake it.

6) Use a soft, dry cloth to clean the surface of this device when it is dirty.

7) Do not measure the body temperature in 30 minutes after sports, dinner or bathing.

8) Wait for about 2 hours to take measurements when the ambient temperate difference is large. (for

example move the device form indoor to outdoor).

9) Leave a small break of 10 seconds between two measurements.

10) Keep away from children because some parts are small enough to be swallowed.

11) This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

WARNING: No modification of this equipment is allowed.

2. Device Introduction

Intended use: This digital infrared thermometer is intended to measure human body, object and ambient

temperature.

BZ0487A VA.0 2014.12.16

Page 3 of 14

Figure 1 Device configuration and LCD full display

3. Working Mode

3.1 OFF mode

There is no any display on LCD in OFF mode.

If the clock has not been set successfully the device will switch off automatically when without operation

for 30 seconds in MEASUREMENT mode.

3.2 MEASUREMENT mode

Press START button ⑥the device will turn on and enter into MEASUREMENT mode. There are three

MEASUREMENT modes: ear mode, forehead mode and ambient or object mode. The LCD display for

each mode is listed below for example:

①Removable cover

(for forehead mode)

②Infrared

robe ti

④LCD display

⑥START button

⑤I/O button

③Forehead/Ear mode

shift button

⑦Battery compartment

cover

Environment or object mode

Forehead mode

Ear mode

Low battery indicator

Temperature and time display

Voice status

SET mode

Memory recall mode

Unit: ℃or ℉

BZ0487A VA.0 2014.12.16

Page 4 of 14

Figure 2 Ear mode Figure 3 Forehead mode Figure 4 Ambient or Object mode

3.3 TIME/AMBIENT mode

If the clock has been set successfully the device will enter into TIME/AMBIENT mode when without

operation for 30 seconds in MEASUREMENT mode. The actual time and ambient temperature will be

displayed on the LCD in turn. See Figure 5 for example.

Figure 5

3.4 SETTING mode

In MEASUREMENT mode press I/O button the device will enter into SETTING mode. You can set the⑤

time, temperature unit (℃or ℉) and voice status in this mode. Details please see Clause 4.2

4. Preparation before Use

4.1 Install or replace batteries

Open battery compartment cover and insert⑦batteries to ensure the polarity (<+> and <->) of the

batteries are correct and then close it. If the low battery icon displayed please replace the batteries

immediately.

yUse 2pcs AAA

alkaline battery.

yDo not mix different types of batteries, or an old battery with a new one.

yRemove the batteries if the device is not going to be used for long time.

yReset the time and date after replacing the batteries.

4.2 System setting

Press START button ⑥the device will enter MEASUREMENT mode then press I/O button to enter⑤

SETTING mode.

1) The first step will enter into memory recall. It will display the last measurement result.

BZ0487A VA.0 2014.12.16

Page 5 of 14

2) Press I/O button to enter into setting the hour. Press START button to se⑤⑥t the hour (see Figure

6b);

3) Press I/O button to confirm the hour and enter into setting the minute. Press START button to⑤ ⑥

set the minute (see Figure 6c);

4) Press I/O button to confirm the minute and enter into setting the temperature unit. Press START⑤

button to shift⑥the temperature unit between ℃and ℉(see Figure 7b);

5) Press I/O button to confirm the temperature unit and enter into setting the voice status. Press⑤

START button to shift the voice between OFF and ON status (see Figure 8a and 8b);⑥

6) Press I/O button to confirm the voice status then ready for measurement.⑤

NOTE: During the above procedures if no operation for 10 seconds the device will enter into

measurement status. If the clock has not been set successfully the time is invalid.

a) b) c)

Figure 6

a) b)

Figure 7

BZ0487A VA.0 2014.12.16

Page 6 of 14

a) b)

Figure 8

5. Temperature measurement

5.1 Ear mode

1) Take off the removable cap ①and press START button ⑥the device will turn on and LCD display will

show all segments for 2 seconds. Then the device will display the last reading if there are readings

stored in it. After that a “be” sound is heard and the device is ready for ear measuring mode. (The

“be” sound will not be heard if the voice function has been closed.) See Figure 9. If place the

removable cap at this time it will shift to forehead measuring mode.

Figure 9

2) Place the probe firmly into ear canal and press START button for about one second and then⑥

release the button when heard a “be” sound. (The “be” sound will not be heard if the voice function

has been closed.)

3) Read the recorded temperature from the LCD display.

5.2 Forehead mode

1) The Forehead/Ear mode shift button ③will be triggered when placing the removable cap ①on the

infrared probe tip ②. Press START button the device will turn on and the LCD display will show all

segments for 2 seconds. Then the device will display the last reading if there are readings stored in it.

After that a “be” sound is heard and the device is ready for forehead measuring mode. (The “be”

sound will not be heard if the voice function has been closed.) See figure 10. If take off the removable

cap at this time it will shift to ear measuring mode.

BZ0487A VA.0 2014.12.16

Page 7 of 14

Figure 10

2) Place the removable cap on forehead and press START button for about one second and then

release the button when heard a “be” sound. (The “be” sound will not be heard if the voice function

has been closed.)

3) Read the recorded temperature from the LCD display.

Note: The thermometer will display “Lo” when measured temperature is lower than 35.0℃and

display “Hi” when forehead temperature is higher than 42.0℃in ear or forehead mode.

5.3 Ambient or object mode

In ear or forehead mode hold START button for 2 seconds the ambient or object temperature will⑥

displayed on LCD. See figure 11.

Figure 11

5.4 Memory recall

This device can recall the last 19 readings for ear and forehead mode each.

In measuring mode press I/O button LCD will displ⑤ay the last reading (Reading 1) (see figure 12 a)) for

example). Press START button consecutively to recall the other 18 readings in succession. (see figure⑥

12 b))

BZ0487A VA.0 2014.12.16

Page 8 of 14

a) b)

Figure 12

6. APP Software Installation and Use (Special for IRT101B)

6.1 APP software installation

Download the “Medxing Nurse”APP software (version: V2.5.608) via the access

http://www.medxing.com/index/download.html and then install it follows the instructions.

6.2 APP software use

1) After installation please click on the icon to enter into measurement interface (Figure 13).

2) Press START button the device will turn on. Click on “connect to device” (Figure 13) and then a⑥

dialog boxes titled “Bluetooth permission request” will appear (Figure 14), by click “Yes” then “Turning

on Bluetooth” will display (Figure 15).

Figure 13 Figure 14 Figure 15

3) After searched the digital infrared thermometer successfully you can connect the thermometer with

mobile by clicking the icon of “Thermo meter” and then the interface (Figure 16) will appeared. After

click “Enter” it will enter into measurement interface (Figure 17).

BZ0487A VA.0 2014.12.16

Page 9 of 14

Figure 16 Figure 17

4) 1s after ear temperature or forehead temperature measurement it will remind you to choose the

measuring states (Figure 18). After you make a choice you can see the current and recent

measurement results (Figure 19).

Figure 18 Figure 19

7. Troubleshooting

The Table listed below explains how to troubleshoot the Digital Infrared Thermometer. It lists possible

error, along with probable causes, and recommended actions to correct the difficulties.

Error Description Possible Causes Solutions

No any display after

pressing START button

when batteries had been

1) The batteries’ polarities had

been positioned wrong.

2) The batteries are empty.

1) Check and ensure batteries’

polarities are correct.

2) Replace the batteries.

BZ0487A VA.0 2014.12.16

Page 10 of 14

installed successfully.

Displays “Hi” The measured body temperature is

higher than 42.0℃(107.6℉)

Check and ensure the probe is

clear then remeasure.

Display “Lo” The measured body temperature is

lower than 35.0℃(95.0℉)

Check and ensure the probe is

clear then remeasure.

●If above errors are still persists or you have any further questions please call Med-link customer

service at 400-058-0755.

8. Cleaning and Disinfection

Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer

housing and the measuring sensor. Ensure no liquid enters the interior of the device. Never use abrasive

cleaning agents, thinners or benzene or other cleaning liquids. Take care not to scratch the surface of the

sensor lens and LCD display.

9. Warranty

This device is covered by a 5 year warranty from the date of purchase. The warranty is valid only on

presentation of the warranty card completed by the dealer confirming date of purchase or the receipt.

The warranty covers the device. The battery and packaging are not included.

Opening or altering the device invalidates the warranty.

The warranty does not cover damage caused by improper handling, a discharged battery, accidents or

non-compliance with the user manual.

10. Technical Specifications

Product name: Digital Infrared Thermometer

Measurement mode: 1) Body temperature mode: ear or forehead mode

2) Ambient or object temperature mode

Measurement range: 1) Body temperature: 35.0～42.0℃(95.0~107.6℉);

2) Ambient temperature: 0～100.0℃ (32.0~212.0℉).

Resolution: 0.1℃/℉

Measurement accuracy: ±0.2℃(±0.4℉), 35.0～42.0℃(95.0~107.6℉)

±1.0℃, ﹤35.0℃(95.0℉) or ﹥42.0℃(107.6℉)

Battery: DC 3.0V (2xAAA alkaline battery)

Temperature limit: Operating: 16~40°C (60.8~104.0 );℉

Storage/Transportation: -25.0~+55.0°C (-13.0~+131.0℉)

Humidity limitation

(Operating/Storage/Transportation): ≤95%RH, non-condensing

Hyperbaric pressure limitation

(Operating/Storage/Transportation): 70~106kPa

Weight: Approx 71g (without batteries)

Dimensions:

159(L)×55(W)×36(H)mm

Memory recall: 19 sets

Altri manuali per IRT101B

Indice

Altri manuali Medxing Termometro

Medxing

Medxing IRT101B Manuale utente

Manuali Termometro popolari di altre marche

Delton

Delton 981A Manuale utente

Baker

Baker MM2P Manuale utente

Tarmo

Tarmo 320281 Manuale utente

Citizen

Citizen CTD 504 Manuale utente

TFA

TFA 14.1500 Manuale utente

Vive

Vive DMD1010 Manuale utente

Gotemp

Gotemp THB4002 Manuale utente

GREISINGER

GREISINGER G 1202 Manuale utente

Amprobe

Amprobe TMD-53W Manuale utente

Trotec

Trotec BP10 Manuale utente

Radiance instruments

Radiance instruments RT616 Series Manuale utente

Eurolec

Eurolec IR151 Manuale utente

Scaneo

Scaneo TS42B Manuale utente

Sper scientific

Sper scientific 800043 Manuale utente

Microlife

Microlife NC 200 Manuale di istruzioni

Motorola

Motorola MBP69SN Guida alla configurazione

The MeatStick

The MeatStick The MeatStick Manuale utente

Hama

Hama TH35-A Manuale utente