Mellanox Technologies MIS5035Q-2SFC Manuale utente
Document no. 3405
Mellanox Technologies Confidential
http://www.mellanox.com
Dismantling Guide
OPNs: MIS 50[23][015][DQ]
Rev. 1.0
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
2 of 10
NOTE:
THIS EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
MELLANOX BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS HARDWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Mellanox Technologies, Inc.
350 Oakmead Parkway Suite
100
Sunnyvale, CA 94085
U.S.A.
www.mellanox.com
Tel: (408) 970-3400
Fax: (408) 970-3403
Mellanox
Technologies Ltd
PO Box 586
Hermon Building
Yokneam 20692
Israel
Tel: +972-4-909-
7200
Fax: +972-4-959-
3245
© Copyright 2011. Mellanox Technologies, Inc. All Rights Reserved.
Mellanox®, BridgeX®, ConnectX®, InfiniBlast®, InfiniBridge®, InfiniHost®,
InfiniRISC®, InfiniScale®, InfiniPCI®, PhyX® and Virtual Protocol Interconnect® are
registered trademarks of Mellanox Technologies, Ltd. CORE-Direct and FabricIT are
trademarks of Mellanox Technologies, Ltd.
All other marks and names mentioned herein may be trademarks of their respective
companies.
Contact Information
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
4 of 10
Table of Contents
Revision .......................................................................................................................................... 5
Preface............................................................................................................................................. 5
Switch OPNs................................................................................................................................... 5
Policy Statement ............................................................................................................................. 6
1Dismantling Instructions......................................................................................................... 7
1.1 InfiniBand switch system systems - General.................................................................. 7
1.2 General Preparations....................................................................................................... 7
1.3 Standard and Short InfiniBand Switch Systems............................................................. 7
1.4 Power Supply Unit Extraction........................................................................................ 8
1.5 Fan Unit Extraction......................................................................................................... 9
1.6 Cover Extraction............................................................................................................. 9
1.7 Battery Extraction........................................................................................................... 9
1.8 Board Extraction........................................................................................................... 10
1.9 Harness Extraction........................................................................................................ 10
List of Tables
Table 1: Revision ...................................................................................................................... 5
Table 2: Switch OPNs for this Procedure................................................................................. 5
Table of Figures
Figure 1 Short vs. Standard Switch........................................................................................... 8
Figure 2 Power Side of the Switch............................................................................................ 8
Figure 3 PSU Pulled Out........................................................................................................... 8
Figure 4 Extracting the Fan Unit............................................................................................... 9
Figure 5 Remove Battery .......................................................................................................... 9
Figure 6 Remove Heat Sink and Boards................................................................................. 10
Figure 7 Remove Harnesses.................................................................................................... 10
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
5 of 10
Revision
Table 1: Revision
Revision
Date
1.0
Oct. 2010
Preface
This manual is intended as a reference for dismantling MIS 50[23] [015][QD]
switch systems in preparation of meeting the requirements of WEEE recycling.
Intended Audience
This manual is intended for technicians who dismantle the switch systems as a
reference for WEEE recyclers.
Mellanox Technologies emphasizes the importance of carefully following all
procedures described in this guide to prevent personal injury.
Switch OPNs
This document is valid for all of the switch OPNs listed in Table 2.
Table 2: Switch OPNs for this Procedure
MIS5035Q-2SFC
MIS5035Q-1SFC
MIS5035Q-1BFC
MIS5035D-1SFC
MIS5035D-1BFC
MIS5031Q-1SFC
MIS5031Q-1BRC
MIS5031Q-1BFC
MIS5031D-1BRC
MIS5031D-1BFC
MIS5030Q-2SFC
MIS5030Q-2BRC
MIS5030Q-1SFR
MIS5030Q-1SFC
MIS5030Q-1BRC
MIS5030Q-1BFC
MIS5030D-2SFC
MIS5025Q-2BRC
MIS5025Q-1SRC
MIS5025Q-1SFC
MIS5025Q-1BRC
MIS5025Q-1BFC
MIS5025D-1SFC
MIS5025D-1BRC
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
6 of 10
Policy Statement
Mellanox Technologies recognizes the importance of developing connectivity
solutions that not only enable our customers to optimize their data centers
performance, but also protect the environment and ensure that future generations
enjoy its bounties. Mellanox Technologies is committed, therefore, to meeting the
requirements of the European Union’s WEEE (waste electrical and electronic
equipment) directive. The directive mandates how the materials used in electrical
and electronic equipment must be disposed of.
Mellanox Technologies has worked closely with its suppliers to eliminate
hazardous materials from its Products. There are instances, however, where it has
not proven possible to completely eliminate all hazardous materials.
Consequently, all applicable products are labeled with a crossed out “wheelie” bin
symbol, indicating that special care must be applied to their disposal and / or
recycling.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
7 of 10
1Dismantling Instructions
This chapter provides detailed instructions for dismantling the InfiniBand switch
Standard and Short systems. Follow the instructions in the order they are
presented.
1.1 InfiniBand switch systems - General
The InfiniBand switch system complies with the RoHS directive under the
exemptions known as RoHS-5 and RoHS-6.
The last digit of the product part number represents the RoHS type.
For example
MIS5030Q-2BRC —C = RoHS-5
MIS5030Q-1SFR —R = RoHS-6
InfiniBand switch systems are comprised of:
Main Board
CPU board with battery
Fan unit
Harness
Power Supply Unit (PSU)
Cover
1.2 General Preparations
The InfiniBand switch system is assembled using Philips screws, and handles
with snap in latches for modules.
To disassemble the InfiniBand switch system you will need a small Philips
screwdriver.
The pictures displayed in the following pages provide visual guidance explaining
how to remove the modules from the mechanical base.
1.3 Standard and Short InfiniBand Switch Systems
There are two types of InfiniBand switch systems.
Standard
Short
The difference is in the length of the mechanical base and cover.
In the following pictures and drawings you will see the difference.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
8 of 10
Figure 1 Short vs. Standard Switch
For InfiniBand switch systems (standard and short), all parts are the same
regarding the disassembly process. The only difference is that the standard
version of the switch has several extra harnesses that connect the board to the fan
and power modules.
1.4 Power Supply Unit Extraction
Figure 2 Power Side of the Switch
Mellanox !!
OK
OK !
!
OK
!
OK
I2C
Figure 3 PSU Pulled Out
Fan Unit
Power Side
!
OK
!
Mellanox
!
OK
!
OK
!
OK
PSU1
To extract a PSU:
1. Remove the power cord from the power supply unit.
2. Grasping the handle with your right hand, push the latch release with your thumb
while pulling the handle outward.
3. Remove the PSU.
4. Repeat the procedure to the second PSU if there is one.
5. If there is only one PSU remove the blank cover.
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
9 of 10
1.5 Fan Unit Extraction
To extract a Fan Unit
Using two hands, push both latch releases simultaneously while pulling the fan
module out of the switch.
Figure 4 Extracting the Fan Unit
Mellanox !!
OK
OK !
!
OK
!
OK
I2C
6. These two latches must be pushed towards each other at the same time while the
module is pulled out.
1.6 Cover Extraction
1. Unscrew all of the screws from the top and sides of the cover and remove the cover.
1.7 Battery Extraction
In all managed Mellanox systems there is a CPU board and / or Management
board, there is a: COIN TYPE LITHIUM BATTERY CR1620 3V 75MA.
Figure 5 Remove Battery
1. Remove the battery before removing the board.
Remove the
battery
Dismantling Guide
Rev. 1.0
Mellanox Technologies Confidential
10 of 10
1.8 Board Extraction
1. Disconnect the harness connectors from the boards.
2. Unscrew the Heat-sink screws to remove the Heat-sink.
3. Unscrew the Philips screws and remove spacers to remove the Main board and CPU
Board.
Figure 6 Remove Heat Sink and Boards
1.9 Harness Extraction
Disconnect harness connectors and remove Harnesses from the base.
Figure 7 Remove Harnesses
These are four
harnesses that
are in the
standard
switches.
Main board
Heat sink
Management board
Questo manuale è adatto per i seguenti modelli
23
Indice
Altri manuali Mellanox Technologies Interruttore
Mellanox Technologies
Mellanox Technologies Spectrum SN2700 Manuale utente
Mellanox Technologies
Mellanox Technologies Spectrum SN2100 Istruzioni per l’uso
Mellanox Technologies
Mellanox Technologies Spectrum SN2100 Manuale utente
Mellanox Technologies
Mellanox Technologies TX6000 Istruzioni per l’uso
Mellanox Technologies
Mellanox Technologies MIS5600Q-10DNC Manuale utente
Mellanox Technologies
Mellanox Technologies InfiniScale MTS3600Q-1BNC Manuale utente
Mellanox Technologies
Mellanox Technologies QM8700 Manuale utente
Mellanox Technologies
Mellanox Technologies Grid Director 4036 Manuale utente
Mellanox Technologies
Mellanox Technologies MIS5025 Manuale utente
Mellanox Technologies
Mellanox Technologies SB7700 Manuale utente
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Manuale di istruzioni
Mellanox Technologies
Mellanox Technologies MetroDX MTX6000-2SFS Manuale utente
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Manuale utente
Mellanox Technologies
Mellanox Technologies Mellanox SX1018 Manuale operativo
Mellanox Technologies
Mellanox Technologies MIS5022Q-1BRR Manuale utente
Mellanox Technologies
Mellanox Technologies TX6100 MetroX Series Istruzioni per l’uso
Mellanox Technologies
Mellanox Technologies MSX6536-10R Manuale
Mellanox Technologies
Mellanox Technologies InfiniScale MTS3600Q-1BNC Manuale utente
Mellanox Technologies
Mellanox Technologies SwitchX-2 MSX6005F-1BFS Istruzioni per l’uso
Mellanox Technologies
Mellanox Technologies MIS5600Q-10DNC Manuale utente
