MEN Mikro Elektronik CB71C Manuale utente

User Manual



CB71C

Rugged COM Express Module with AMD V1000

ANSI-VITA 59 RCE Module

2018-06-2920CB71C00 E1

20CB71C00 E1 2018-06-29 Page 2

Contents

Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.2 Product Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1.2.1 Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1.2.2 Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

1.3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

1.4 Cooling Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

1.4.1 Cooling of Rugged COM Express Modules (VITA 59). . . . . . . . . . . .16

1.4.2 Cooling of COM Express Modules (COM.0) . . . . . . . . . . . . . . . . . . .17

1.5 Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.1 Configuring the Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.2 Connecting and Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.3 Installing Operating System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

2.4 Installing Driver Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

2.5 Using the CB71C under Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2.5.1 Accessing SMBus/I2C Devices using Standard Linux I2C Tools. . . 22

2.5.2 Managing RTC Time Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . .22

3 Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.1 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.2 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.2.1 Processor Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.3 Trusted Platform Module (TPM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.4 Supervision and Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

3.4.1 Watchdog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

3.4.2 Temperature Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.4.3 Event Logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

3.5 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.6 Real-Time Clock (RTC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.6.1 Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.7 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.7.1 System RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.7.2 Boot Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.8 Mass Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.8.1 Serial ATA (SATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.8.2 eMMC Multimedia Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.9 Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

3.10 Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

3.11 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

3.12 Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

3.12.1 Ethernet Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

20CB71C00 E1 2018-06-29 Page 3

Contents

3.13 PCI Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.14 UART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.15 GPIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.15.1 Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.16 Rugged COM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

3.16.1 COM Express Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

4 Hardware/Software Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.1 SMBus/I2C Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Figures

Figure 1. Board layout – RCE inside cover and frame, connector side . . . . . . . . . . . . . . 11

Figure 2. Board layout – connector side (CB71 COM Express) . . . . . . . . . . . . . . . . . . . .12

Figure 3. Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Figure 4. RCE thermal concept – cooling wings between frame and cover . . . . . . . . . . 17

Figure 5. Product labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Tables

Table 1. Ethernet status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Table 2. Connector types – COM Express . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Table 3. Pin assignment of COM Express connectors J1 and J2 . . . . . . . . . . . . . . . . . . .31

Table 4. Signal Mnemonics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Table 5. SMBus/I2C devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

20CB71C00 E1 2018-06-29 Page 4

About this Document

This user manual is intended only for system developers and integrators, it is not

intended for end users.

It describes the design, functions and connection of the product. The manual does not

include detailed information on individual components (data sheets etc.).

History

CB71C product page with up-to-date information and downloads:

www.men.de/products/cb71c/

Issue Comments Date

E1 First issue 2018-06-29

20CB71C00 E1 2018-06-29 Page 5

About this Document

Conventions

Indicates important information or warnings concerning situations which

could result in personal injury, or damage or destruction of the

component.

Indicates important information concerning electrostatic discharge which

could result in damage or destruction of the component.

Indicates important information or warnings concerning proper

functionality of the product described in this document.

The globe icon indicates a hyperlink that links directly to the Internet.

When no globe icon is present, the hyperlink links to specific information

within this document.

Italics Folder, file and function names are printed in italics.

Comment Comments embedded into coding examples are shown in green text.

IRQ#

/IRQ

Signal names followed by a hashtag "#" or preceded by a forward slash "/"

indicate that this signal is either active low or that it becomes active at a

falling edge.

In/Out Signal directions in signal mnemonics tables generally refer to the

corresponding board or component, "in" meaning "to the board or

component", "out" meaning "from the board or component".

0xFF Hexadecimal numbers are preceded by "0x".

0b1111 Binary numbers are preceded by "0b".

20CB71C00 E1 2018-06-29 Page 6

Product Safety

Electrostatic Discharge (ESD)

Computer boards and components contain electrostatic sensitive devices.

Electrostatic discharge (ESD) can damage components. To protect the PCB

and other components against damage from static electricity, you should

follow some precautions whenever you work on your computer.

Power down and unplug your computer system when working on the

inside.

Hold components by the edges and try not to touch the IC chips, leads,

or circuitry.

Use a grounded wrist strap before handling computer components.

Place components on a grounded antistatic pad or on the bag that came

with the component whenever the components are separated from the

system.

Only store the product in its original ESD-protected packaging. Retain

the original packaging in case you need to return the product to MEN for

repair.

20CB71C00 E1 2018-06-29 Page 7

Legal Information

Changes

MEN Mikro Elektronik GmbH ("MEN") reserves the right to make changes without further

notice to any products herein.

Warranty, Guarantee, Liability

MEN makes no warranty, representation or guarantee of any kind regarding the

suitability of its products for any particular purpose, nor does MEN assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims

any and all liability, including, without limitation, consequential or incidental damages.

TO THE EXTENT APPLICABLE, SPECIFICALLY EXCLUDED ARE ANY IMPLIED WARRANTIES

ARISING BY OPERATION OF LAW, CUSTOM OR USAGE, INCLUDING WITHOUT LIMITATION,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE OR USE. In no event shall MEN be liable for more than the contract price for

the products in question. If buyer does not notify MEN in writing within the foregoing

warranty period, MEN shall have no liability or obligation to buyer hereunder.

The publication is provided on the terms and understanding that:

1. MEN is not responsible for the results of any actions taken on the basis of

information in the publication, nor for any error in or omission from the publication; and

2. MEN is not engaged in rendering technical or other advice or services.

MEN expressly disclaims all and any liability and responsibility to any person, whether a

reader of the publication or not, in respect of anything, and of the consequences of

anything, done or omitted to be done by any such person in reliance, whether wholly or

partially, on the whole or any part of the contents of the publication.

Conditions for Use, Field of Application

The correct function of MEN products in mission-critical and life-critical applications is

limited to the environmental specification given for each product in the technical user

manual. The correct function of MEN products under extended environmental

conditions is limited to the individual requirement specification and subsequent

validation documents for each product for the applicable use case and has to be agreed

upon in writing by MEN and the customer. Should the customer purchase or use MEN

products for any unintended or unauthorized application, the customer shall indemnify

and hold MEN and its officers, employees, subsidiaries, affiliates, and distributors

harmless against all claims, costs, damages, and expenses, and reasonable attorney fees

arising out of, directly or indirectly, any claim or personal injury or death associated with

such unintended or unauthorized use, even if such claim alleges that MEN was negligent

regarding the design or manufacture of the part. In no case is MEN liable for the correct

function of the technical installation where MEN products are a part of.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified for the specific task in accordance with the relevant documentation,

in particular its warning notices and safety instructions. Qualified personnel are those

who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

20CB71C00 E1 2018-06-29 Page 8

Legal Information

Conformity

MEN products are no ready-made products for end users. They are tested according to

the standards given in the Technical Data and thus enable you to achieve certification of

the product according to the standards applicable in your field of application.

RoHS

Since July 1, 2006 all MEN standard products comply with RoHS legislation.

Since January 2005 the SMD and manual soldering processes at MEN have already been

completely lead-free. Between June 2004 and June 30, 2006 MEN’s selected component

suppliers have changed delivery to RoHS-compliant parts. During this period any change

and status was traceable through the MEN ERP system and the boards gradually became

RoHS-compliant.

WEEE Application

Nevertheless, MEN is registered as a manufacturer in Germany. The registration number

can be provided on request.

The WEEE directive does not apply to fixed industrial plants and tools. The

compliance is the responsibility of the company which puts the product

on the market, as defined in the directive; components and sub-

assemblies are not subject to product compliance.

In other words: Since MEN does not deliver ready-made products to end

users, the WEEE directive is not applicable for MEN. Users are

nevertheless recommended to properly recycle all electronic boards

which have passed their life cycle.

Germany

MEN Mikro Elektronik GmbH

Neuwieder Straße 3-7

90411 Nuremberg

Phone +49-911-99 33 5-0

France

MEN Mikro Elektronik SAS

18, rue René Cassin

ZA de la Châtelaine

74240 Gaillard

Phone +33-450-955-312

USA

MEN Micro Inc.

860 Penllyn Blue Bell Pike

Blue Bell, PA 19422

Phone 215-542-9575

China

MEN Mikro Elektronik Co., Ltd.

Room 301A,

#971 Dongfang Road

200122 Shanghai

Phone +86-21-5058-0963

[email protected]

www.men.de

[email protected]

www.men-france.fr

sales@menmicro.com

www.menmicro.com

sales@men-china.cn

www.men-china.cn

Product Overview

20CB71C00 E1 2018-06-29 Page 9

1 Product Overview

1.1 Product Description

Ultra-rugged VITA 59 COM Express

The CB71C is an ultra-rugged COM Express module for rail, public transportation and

industrial applications, e.g. data acquisition, infotainment, transcoding, live 3D. It is 100%

compatible to COM Express Type 6 Pin-Out and conforms to the VITA 59 standard which

specifies the mechanics to ensure reliable operation even under the harshest

environmental conditions.

Perfect for Harsh Environments

The modules are embedded in a closed aluminum frame, which ensures optimum EMC

protection and efficient conduction cooling. Direct air cooling is possible by placing a

heat sink on the cover. The CB71C is designed for operation from -40°C to +85°C

(housing). To withstand serious shock and vibration, only soldered components are

used. The design is optimized for conformal coating.

Powerful Processing and Graphics on a Single Chip

The CB71C is based on AMD's V1000 APU family. It is equipped with a Radeon Vega next-

generation 3D graphics engine and supports up to 4 displays with a resolution of up to

4k without the need for additional graphics hardware. With up to four high-performance

processor cores and AMD-V extension, the CB71C is also suitable for virtualization.

Excellent Price/Performance Ratio, Flexible Design

The CB71C can be equipped with a wide range of long-term available processors with

scalable performance, all supporting ECC. Passive cooling is possible with low-power

versions.

Safety and Security

The board features an advanced board management controller with monitoring

functions for safety-relevant applications. In addition, the CB71C has a Trusted Platform

Module and supports hardware memory encryption, providing protection against both

physical and inter-VM storage attacks. This is essential for security-critical applications

such as payment and ticketing terminals, fleet management or monitoring.

Memory and I/O

The CB71C can be equipped with up to 32 GB of directly soldered DDR4 main memory

and up to 64 GB eMMC. Available high-speed interfaces include PCI Express 3.0 links, DDI

(DP, eDP, HDMI), SATA 3.0, Gigabit Ethernet and USB 3.0.

Product Overview

20CB71C00 E1 2018-06-29 Page 10

1.2 Product Architecture

1.2.1 Interfaces

1.2.1.1 CB71C Rugged COM Express Board Layout

Figure 1. Board layout – RCE inside cover and frame, connector side

Screwsconnectingtheframeandcoverofthemodule .Donotremove.

HolesformountingtheRuggedCOMExpressmoduleonacarrierboard.

A110

B110

C110

D110

COMExpressConnectors

CoolingWing

HolesformountingaCOMExpressmodule versiononacarrierboard.

Indice

Altri manuali MEN Mikro Elektronik Unità di controllo

MEN Mikro Elektronik

MEN Mikro Elektronik M24 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente