Messina L21 Manuale utente
So Easy! So Fun!
For models L21 & 34L
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety should always be
followed, including the following:
(110-120V area) or 1 watts (220-240V area).
16.The sound pressure level under normal operating conditions is
7 dB(A).
17.Please turn off the machine or unplug when the machine is not
operating properly.
18.Never place anything on the foot controller.
19.If the supply cord that fixed with foot controller is damaged, it
must be replaced by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard.
20.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
21.Children should be supervised to ensure that they do not play
with the appliance.
1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately
after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same type
rated 10 watts
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children.
2. Use this appliance only for its intended use as described in this
manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it
is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to the nearest authorized
dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the appliance with any air openings block. Keep
ventilation openings of the sewing machine and foot controller
free from accumulation of lint, dust, and loose cloth.
. Keep fingers away from all moving parts. Special care is
required around the sewing machine needle.
6. Always use the proper needle plate, The wrong plate can cause
the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
9. Switch the sewing machine off ("O") when making any adjustments
in the needle area, such as threading needle, changing needle,
threading bobbin, or changing presser foot, and the like.
10.Always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
11.Never drop or insert any object into any opening.
12.Do not use outdoors.
13.Do not operate where aerosol spray products are being used or
where oxygen is being administered.
14.To disconnect, turn all controls to the off ("O") position, then
remove plug from outlet.
1 .Do not unplug by pulling on cord. To unplug, grasp the plug, not
the cord.
Read all instructions before using this sewing machine.
This sewing machine is intended for household use only.
DANGER
SA E THESE INSTRUCTIONS
- To reduce the risk of electric shock:
WARNING - To reduce the risk of burns, fire, electric
shock, or injury to persons:
Congratulations:
As the owner of a new sewing machine, you will enjoy precision quality stitching
on all types of fabrics, from multiple layers of denim to delicate silks.
Your sewing machine offers the ultimate in simplicity and ease of operation. For
your safety and to fully enjoy the many advantages and ease of operation of your
sewing machine, we recommend that you read all the important safeguards and
use and care instructions in this instruction book.
May we suggest that before you start to use your sewing machine, you discover
the many features and advantages by going through this instruction book, step by
step, while seated at your sewing machine.
Details of the Machine ...............................................................2/3
Accessories ..................................................................................4
Fitting the snap-in sewing table ....................................................
Connecting machine to power source ..........................................6
Changing the bulb.........................................................................7
Two-step presser foot lever/ ......8
Attaching the presser foot holder..................................................9
Winding the bobbin .....................................................................10
Inserting the bobbin ....................................................................11
Threading the upper thread ........................................................13
Thread tension............................................................................1
Bringing up the lower thread.......................................................16
Reverse sewing/ Remove the work/ Cutting the thread..............
Matching needle/ fabric/ thread ..................................................18
How to choose your pattern........................................................19
Straight stitching .........................................................................20
Zigzag stitching...........................................................................21
Blind hem/ lingerie stitch.............................................................22
Overlock stitches ........................................................................23
Sewing on buttons ......................................................................24
How to sew buttonholes..............................................................2
Zippers and piping ......................................................................26
Sewing with hemmer foot ...........................................................27
3-step zig-zag .............................................................................28
Stitch selection............................................................................29
Smocking stitch...........................................................................30
Sewing with the cording foot.......................................................31
Darning .......................................................................................32
Practical stitches.........................................................................33
Patch work ..................................................................................36
Applique......................................................................................37
Twin needle 38
Monogramming and embroidering with embroidery hoop .....
The walking foot accessory ........................................................41
Maintenance ...............................................................................42
Trouble shooting guide ...............................................................43
....................................12
Automatic needle threader (optional)..........................................14
17
Quilting........................................................................................34
Gathering....................................................................................3
39/40
Adjusting presser foot pressure
Inserting the needle (System 130/70 H)
(optional) ................................................................
List of contents
1. Stitch width dial (optional)
2. Thread tension dial
3. Thread take-up lever
4.
.
6. Needle plate
7.
8. Bobbin stopper
9. Stitch length dial (optional)
10.
11. Reverse sewing lever
12.
Thread cutter
Presser foot
Sewing table and accessory box
Stitch display
(optional)Automatic threader
2
Details of the machine
1
2
3
4
6
7
8
9
10
11
12
3
Details of the machine
20
22
1
14
16
17
18
19
21
13
13.Handle
14.Bobbin winder
1 .Spool pin
16.Hand wheel
17.Pattern selector dial
18.Power switch
19.Main plug socket
20.Bobbin thread guide
21.Upper thread guide
22.Presser foot lever
Accessories
abcd
006806008 00690 008 006909008 006914008
006804008
m
006803008
p
006800008
q
006810008
o
006016008
s
006917008
r
006916008
n
006812008
u
00681 008
Standard accessories
Extra accessories (optional)
t
4
Standard accessories
Extra accessories (optional)
m.Satin stitch foot
n. Overcasting foot
o. Blind hem foot
p. Darning / Embroidery foot
q. Hemmer foot
r. Cording foot
s
t. Gathering foot
u. Walking foot
v.
a. All purpose foot
b. Zipper foot
c. Button sewing foot
d. Buttonhole foot
e. L-screwdriver
f. Seam ripper/ brush
g. Oil bottle
h. Spool pin felt (2x)
i. Pack of needles (3x)
j. Bobbin (3x)
K.
l. Darning plate
. Quilting foot
Twin needle
Edge/quilting guide
v
efg
j
ik
h
l
Hold the removable extension table horizontal, and push it in
the direction of the arrow. (1)
The inside of the removable extension table can be utilized as
an accessory box.
To open, flip cover down as shown. (2)
5
Fitting the snap-in sewing table
1
2
Connect the machine to a power source as illustrated. (1)
For appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Unplug power cord when machine is not in use.
Foot control regulates the sewing speed. (3)
Consult a qualified electrician if in doubt as to connect
machine to power source.
Press main switch (A) for power and light on. (" l ")
Attention:
Foot control
Attention:
Sewing light
Unplug power cord when machine is not in use. The foot
control must be used with the appliance by 4C-316B (110-
120V area)/ 4C-326G (230V area)/ 4C-316C, 4C-326C
(220-240V area) manufactured by Panasonic Co., Ltd.(TW)
or KD-1902 (110-120V area)/ KD-2902 (220-240V area)
manufactured by ZHEJIANG FOUNDER MOTOR
CORPORATION Ltd.
For appliance with a polarized plug (one blade is wider than
the other).
To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If it does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in
any way. (2)
IMPORTANT NOTICE
Connecting machine to power source
6
1
3
2
Polarized attachment plug
Conductor ilntended
to be grounded
A
7
Changing the bulb
Disconnect the machine from the power supply by removing
the plug from the main socket!
- Loosen screw (A) as illustrated. (1)
- Remove the cover (B).
- Unscrew the bulb and fit new one (C). (2)
- Replace the cover and tighten screw.
Should there be any problem. Ask your local dealer for
advice.
Replace bulb with same type rated 10 watts(110-120V area)
or 1 watts (220-240V area).
C
1
2
A
B
Questo manuale è adatto per i seguenti modelli
1
Altri manuali Messina Macchina da cucire
