Messina P5721 Manuale utente
Model P5721/ P5729/ P5823/ P5832
So Easy ! !So Fun
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety should always be
followed, including the following:
(110-120V area) or 1 watts (220-240V area).
16.The sound pressure level under normal operating conditions is
7 dB(A).
17.Please turn off the machine or unplug when the machine is not
operating properly.
18.Never place anything on the foot controller.
19.If the supply cord that fixed with foot controller is damaged, it
must be replaced by the manufacturer or its service agent or a
similar qualified person in order to avoid a hazard.
20.This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
21.Children should be supervised to ensure that they do not play
with the appliance.
Read all instructions before using this sewing machine.
1. An appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately
after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same type
rated 10 watts
1. Do not allow to be used as a toy. Close attention is necessary
when this appliance is used by or near children.
2. Use this appliance only for its intended use as described in this
manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it
is not working properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to the nearest authorized
dealer or service center for examination, repair, electrical or
mechanical adjustment.
4. Never operate the appliance with any air openings block. Keep
ventilation openings of the sewing machine and foot controller
free from accumulation of lint, dust, and loose cloth.
. Keep fingers away from all moving parts. Special care is required
around the sewing machine needle.
6. Always use the proper needle plate. The wrong plate can cause
the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the
needle causing it to break.
9. Switch the sewing machine off ("O") when making any adjustments
in the needle area, such as threading needle, changing needle,
threading bobbin, or changing presser foot, and the like.
10.Always unplug sewing machine from the electrical outlet when
removing covers, lubricating, or when making any other user
servicing adjustments mentioned in the instruction manual.
11.Never drop or insert any object into any opening.
12.Do not use outdoors.
13.Do not operate where aerosol spray products are being used or
where oxygen is being administered.
14.To disconnect, turn all controls to the off ("O") position, then
remove plug from outlet.
1 .Do not unplug by pulling on cord. To unplug, grasp the plug, not
the cord.
DANGER
SAVE T ESE INSTRUCTIONS
- To reduce the risk of electric shock:
WARNING - To reduce the risk of burns, fire, electric
shock, or injury to persons:
This sewing machine is intended for household use only.
Congratulations:
As the owner of a new sewing machine, you will enjoy precision quality stitching
on all types of fabrics, from multiple layers of denim to delicate silks.
Your sewing machine offers the ultimate in simplicity and ease of operation. For
your safety and to fully enjoy the many advantages and ease of operation of your
sewing machine, we recommend that you read all the important safeguards and
use and care instructions in this instruction book.
May we suggest that before you start to use your sewing machine, you discover
the many features and advantages by going through this instruction book, step by
step, while seated at your sewing machine.
II
List of contents
Details of the machine.............................................................2/3
Accessories ................................................................................4
Fitting the snap-in sewing table..................................................
Connecting machine to power source ........................................6
Changing the bulb ......................................................................7
Two-step presser foot lifter.........................................................8
Attaching the presser foot holder ...............................................9
Winding the bobbin...................................................................10
Inserting the bobbin..................................................................11
Inserting the needle (System 130/70 H) ..................................12
Threading the upper thread......................................................13
Automatic needle threader (optional) .......................................14
Thread tension .........................................................................1
Raising the bobbin thread ........................................................16
Matching needle/ fabric/ thread ................................................17
How to choose your pattern .....................................................18
Stitch width dial & stitch length dial ........................................19
Sewing straight stitch ...............................................................20
Reverse sewing/ Removing the work/ Cutting the thread ........21
Blind hem/ lingerie stitch ..........................................................22
Overlock stitches ......................................................................23
Sewing on buttons....................................................................24
Sew 1-step buttonholes............................................................2
Zippers and piping....................................................................26
Sewing with the Hemmer foot ..................................................27
3-step zig-zag...........................................................................28
Stitch selection .........................................................................29
Smocking stitch .......................................................................30
Sewing with the cording foot ....................................................31
Darning.....................................................................................32
Practical stitches ......................................................................33
Quilting .....................................................................................34
Gathering..................................................................................3
Patch work................................................................................36
Applique ...................................................................................37
Twin needle ..............................................................................38
Monogramming and embroidering with Embroidery hoop*....39/40
The walking foot accessory ......................................................41
Maintenance.............................................................................42
Trouble shooting guide.............................................................43
III
2
1. Thread tension dial
2. Thread take-up lever
3. Thread cutter
4. Presser foot
. Needle plate
6. Sewing table and accessory box
7. Reverse sewing lever
8. Bobbin winder stopper
9. Stitch width dial (not on all models)
10. Stitch length dial
11. Pattern selector dial
12. One step buttonhole lever
13. Automatic threader (optional)
Details of the machine
1
2
3
5
6
7
8
9
11
10
4
12
13
14. Horizontal spool pin
1 . Bobbin winder spindle
16. Hole for second spool pin
17. Handwheel
18. Power switch
19. Main plug socket
20. Bobbin thread guide
21. Upper thread guide
22. Face plate
23. Handle
24. Presser foot lifter
2 . Foot control
26. Power cord
3
Details of the machine
18
19
14
15
17
16
20
21
22
24
23
25
26
Accessories
Standard accessories (1)
Optional accessories (2)
a. All purpose foot
b. Zipper foot
c. Buttonhole foot
d. Button sewing foot
e. Seam ripper/ brush
f. Edge/ quilting guide
g. Pack of needles
h. Spool holder
i. Bobbin (3x)
j. L-screwdriver
k. Oil bottle
l. Darning plate
m. Second spool pin
n. Spool pin felt
(These 10 accessories are not supplied with this machine; they
are however available as special accessories from your local
dealer.)
o. Satin stitch foot
p. Overcasting foot
q. Hemmer foot
r. Cording foot
s. Blind hem foot
t. Darning/ embroidery foot
u. Gathering foot
v. Quilting foot
w. Walking foot
x. Twin needle
4
006016008
r
006812008
po
006804008 006803008 006800008
q
006810008
006917008
tu
006916008 00681 008
v
s
w
Optional accessories
ij l
k
abcd
006806008 00690 008 006914008
006Q6A01 0
h
g
ef
m n
Standard accessories
1
2
x
Keep the snap-in sewing table horizontal, and push it in the
direction of the arrow. (1)
The inside of the snap-in sewing table can be utilized as an
accessory box. (2)
Fitting the snap-in sewing table
5
2
1
Polarized attachment plug
Conductor ilntended
to be grounded
1
23
6
Connect the machine to a power source as illustrated. (1)
For appliance is equipped with a polarized plug which must be
used with the appropriate polarized outlet. (2)
Unplug power cord when machine is not in use.
Foot control regulates the sewing speed. (3)
Consult a qualified electrician if in doubt as to connect
machine to power source.
Unplug power cord when machine is not in use.
Press main switch (A) for power and light on. (" l ")
Attention:
Foot control
Attention:
Sewing light
The appliance must be used with the foot controller FC-1902A
(110-120V area); FC-2902A / FC-2902C (220-240V area).
For appliance with a polarized plug (one blade is wider than
the other).
To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only one way. If it does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify
the plug in any way. (2)
IMPORTANT NOTICE
Connecting machine to power source
A
1
7
Changing the bulb
Disconnect the machine from the power supply by removing the
plug from the main socket!
- Loosen screw (A) as illustrated. (1)
- Remove the cover (B).
- Unscrew the bulb and fit new one (C). (2)
- Replace the cover and tighten screw.
Replace bulb with same type rated 10 watts(110-120V area) or
1 watts (220-240V area).
Should there be any problem. Ask your local dealer for
advice.
AB
C
2
2
Questo manuale è adatto per i seguenti modelli
3
Altri manuali Messina Macchina da cucire
