Metra Electronics JP-1014 Manuale utente

INSTALLATION INSTRUCTIONS

JP-1014

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• Driver and passenger speciﬁc dash replacement sealed speaker pods

to install 6” to 6.75” speaker

• Mounting positions for Chrysler three hole mount used by speciﬁc

speaker manufacturers such as Alpine

• Sealed enclosure with a hole for the factory wiring grommet

• Includes necessary speaker harness adapter

KIT COMPONENTS

• A) Speaker pods (L&R) • B) Speaker harness adapter (2)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 8mm, 10mm, socket wrench

TABLE OF CONTENTS

Dash Disassembly ..............................................2-6

Kit Assembly ..........................................................7

Jeep Wrangler (JL) 2018, Wrangler 2019-Up

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

A B

1.800.221.0932

MetraOnline.com

DASH DISASSEMBLY

1. Unclip and remove the panel below the

steering column. Remove (2) Phillips

screw exposed. (Figures A,B)

2. Unclip, unplug, and remove the climate

control panel. (Figure C)

(Figure D)

(Figure E)

3. Remove (2) Phillips screws securing

the radio trim panel, then unclip and

remove. (Figure D)

4. Remove (1) Phillips screw securing the

dash pad, then unclip and remove.

(Figure E)

(Figure A)

(Figure B)

(Figure C)

REV. 12/12/2019 INSTJP-1014 3

DASH DISASSEMBLY

5. Remove (8) Phillips screws securing the

instrument panel on the left side, and

airbag panel on the right side.

(Figure F, G)

6. Unclip the steering column shroud then

set aside. (Figure H)

Driver’s side speaker removal:

7. Open the driver’s door, then unclip

and remove the panel on the side of

the dash. Remove (5) Phillips screws

exposed. (Figure I)

8. Remove (5) Phillips screws securing the

speaker panel, then unclip and remove.

(Figure J)

(Figure I)

(Figure F)

(Figure G)

(Figure H) (Figure J)

1.800.221.0932

MetraOnline.com

DASH DISASSEMBLY

9. Remove (4) 10mm screws and (1) 8mm

screw securing the dashboard brace.

The brace only needs loosened to aid in

removing the speaker pod in the next

step. (Figure K, L)

(Figure L) (Figure N)

(Figure M)(Figure K)

10. Remove (3) Phillips screws securing

the speaker pod, then unclip, unplug,

and remove. Gentle aggression will be

required to remove the pod. (Figure M)

Note: There is an electronic module

attached to the back of the pod which

must be removed and reused in

Kit Assembly. (Figure N)

REV. 12/12/2019 INSTJP-1014 5

DASH DISASSEMBLY

Passenger side speaker removal:

11. Open the passenger door, then unclip

and remove the panel on the side of

the dash. Remove (5) Phillips screws

exposed. (Figure O)

12. Starting from the right side, unclip and

remove the trim panel from the grab-

bar. Remove (2) 10mm screws securing

the grab-bar, then remove. (Figure P)

13. Unclip and remove the airbag trim

panel, then remove (2) Phillips screws

exposed. (Figure Q)

14. Open the glovebox, then unclip the

hinge and drop the glovebox. Remove

(3) Phillips screws exposed. (Figure R)

(Figure Q)(Figure O)

(Figure R)(Figure P)

1.800.221.0932

MetraOnline.com

(Figure S)

15. Looking in the glovebox cavity up high,

remove (2) 13mm screws securing the

back of the passenger side airbag.

(Figure S))

16. Unclip and slightly release the airbag

panel, just enough to expose (3) Phillips

screws securing the passenger side dash

panel. Remove the (3) screws.

(Figures T, U)

DASH DISASSEMBLY

(Figure U)

(Figure T) (Figure V)

17. Carefully unclip and pull out on the

dashboard panel just enough to expose

the speaker pod. Remove (3) Phillips

screws securing the pod, then unclip,

unplug and remove. (Figure V)

Continue to Kit Assembly

REV. 12/12/2019 INSTJP-1014 7

KIT ASSEMBLY

1. Remove the factory speakers from the

speaker pods. (Figure A)

2. Remove the grommet and factory

wiring from the speaker pods. (Figure B)

3. Insert the grommets into the JP-1014

speaker pods. (Figure C)

4. Attach the speaker harnesses provided

to the factory harness inside the pods,

and then to the aftermarket speaker.

(Figure D)

5. Secure the aftermarket speakers to the

pods using hardware supplied with

the speakers.

6. Reassemble the dash in reverse order

of disassembly. Ensure that the factory

electronic module removed in Dash

Disassembly, step 10, is connected back

to the vehicle.

(Figure A) (Figure C)

(Figure B) (Figure D)

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certiﬁed technicians

INSTALLATION INSTRUCTIONS

JP-1014

If you are having difﬁculties with the installation

of this product, contact our Tech Support line

either by phone at 386-257-1187, or email at

techsupport@metra-autosound.com. Before

doing so, look over the instruction booklet a

second time and ensure that the installation was

performed exactly as the instruction booklet

is stated. Have the vehicle apart and ready to

perform troubleshooting steps before contacting

Metra/Axxess Tech Support.

Altri manuali Metra Electronics Accessori per automobili

Metra Electronics

Metra Electronics 99-6540 Manuale utente

Metra Electronics

Metra Electronics 99-8234 Manuale utente

Metra Electronics

Metra Electronics 99-6505 Manuale utente

Metra Electronics

Metra Electronics OESWC-1761-RF Manuale utente

Metra Electronics

Metra Electronics 99-3012G Manuale utente

Metra Electronics

Metra Electronics 95-5818 Manuale utente

Metra Electronics

Metra Electronics iBeam TE-AHD7M Manuale utente

Metra Electronics

Metra Electronics 95-7331 Manuale utente

Metra Electronics

Metra Electronics INST-GMOS05 Manuale utente

Metra Electronics

Metra Electronics 99-8244HG Manuale utente

Metra Electronics

Metra Electronics 99-3030B Manuale utente

Metra Electronics

Metra Electronics 95-6523 Manuale utente

Metra Electronics

Metra Electronics JP-RGBKT-1 Manuale utente

Metra Electronics

Metra Electronics 95-7339S Manuale utente

Metra Electronics

Metra Electronics 99-8206 Manuale utente

Metra Electronics

Metra Electronics 95-3314G Manuale utente

Metra Electronics

Metra Electronics 99-8201 Manuale utente

Metra Electronics

Metra Electronics 99-7875 Manuale utente

Metra Electronics

Metra Electronics 95-7376B Manuale utente

Metra Electronics

Metra Electronics 99-8714 Manuale utente

Metra Electronics

Metra Electronics 99-7365B Manuale utente

Metra Electronics

Metra Electronics 95-9607B Manuale utente

Metra Electronics

Metra Electronics 99-7352B Manuale utente

Metra Electronics

Metra Electronics 99-7524B Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente