Meyer Sound DS-2P Manuale utente
this unit is as simple as
plugging-in a power source
and an audio signal source.
The amplifier unit
is equipped with TruPower™
Limiter technology, which
maximizes speaker protection
reliability and component life.
This breakthrough in speaker
control also results in higher
SPL at all frequencies, and
increased available headroom.
Long term power compression,
typically 3-6 dB in conventional
systems, is less than 1 dB.
Maximum SPL capability
remains constant even during
operation at high levels for
extended periods.
DS-2P performance can be
supervised using the Remote
Monitoring System™(RMS).
This enables users at a
The DS-2P is a self-powered,
arrayable mid-bass loud-
speaker designed to
supplement the MSL-4 unit in
the 40-160 Hz range. It can
also be used with other, non-
powered units such as the
MSL-3A and MSL-10A. It
delivers high audio power with
extremely low distortion.
The DS-2P uses two 15-inch
cone drivers in a folded horn
enclosure. These horns have a
hyperbolic flare that give the
unit maximum energy transfer
with minimum frequency
response ripple.
The DS-2P has the
Intelligent ACTM system, which
performs automatic voltage
selection, EMI filtering, soft
current turn-on, and surge
suppression. Installation of
FEATURES
computer terminal to monitor
such parameters as limiting
activity, power output, voltage,
temperature, fan speed, and
driver status.
The built-in power amplifier
is designed for maximum
efficiency and reliability.
Servicing in the field is
facilitated by the modular
design of the DS-2P; the
entire power/amplifier module
can be accessed and replaced,
if necessary.
Self-Powered Mid-Bass Reinforcement Loudspeaker
DS-2P
Integrated control
electronics and amplifiers
TruPower ™
Limiting (TPL)
Intelligent AC™ System
Compatible with the
Remote Monitoring
System™(RMS)
High-power
Extremely low distortion
Reliable and durable
Arrayable
Meyer
Sound
Superior
engineering
for the art
and science
of sound.
Acoustical1
(each loudspeaker)
Coverage
Transducers
Audio Input
Amplifiers
AC Power
Physical
Notes
56.75
5.50
30.00
30.00 30.26
21.97
13.36
13.16
10.63
21.25 7.5°
PHYSICALDIMENSIONS
DS-2P SPECIFICATIONS
Frequency Response2
Phase Response2
Maximum SPL2
Dynamic Range
(-6 dB points)
Low Frequency
Type
Connector
Nominal Input Level
Type
Burst capability3
THD, IM, TIM
Connector
Automatic voltage selection
Operational Voltage range
Max Continuous RMS Current (>10 sec)
Burst RMS Current (<1 sec)
Max Peak Current During Burst
Soft Current Turn-on
Dimensions
Weight
Enclosure
Finish
Protective Grill
Rigging
±4 dB from 40 Hz to 160 Hz
±60° from 60 Hz to 200 Hz
>140 dB SPL peak@1 meter
>120 dB
120°H; 120°V
15” diameter MS-15 cone (2)
10kΩ impedance, electronically balanced
XLR (A-3) male and female
+4 dBu
Complementary power MOSFET output stages (audio class AB/H)
1240 watts (620 watts/channel)
<.02 %
250V NEMA L6-20P (twistlock) inlet or IEC 309 male inlet4
95-125 VAC and 208-235 VAC; 50/60 Hz5
Turn on: 85 VAC; Turn off: 134 VAC; 50/60 Hz
Turn on: 165 VAC; Turn off: 264 VAC; 50/60 Hz
@115V: 8A @230V: 4A @100V: 10A
@115V: 15A @230V: 8A @100V: 18A
@115V: 22Apk @230V: 11Apk @100V: 25Apk
Inrush current <12A @ 115V
21 1⁄4” W x 56 3⁄4” H x 30” D
243 lbs (110 kg) / shipping: 267 lbs (121 kg)
Multi-ply hardwood
Black textured
Perforated metal grill, charcoal-grey foam
Aircraft pan fittings (3 on both top and bottom).
Working load for each fitting is 600 lbs, which is 1⁄5the
cabinet breaking strength (with straight tensile pull).
1. Acoustical specifications are for the minimum configuration of two DS-2P cabinets and are
measured on axis at 2 meters from 1/R image (located at cabinet rear).
2. Subject to half space loading, measured with one-third octave frequency resolution in
fixed ISO bands.
3. Nominal 8Ω resistive load, pink noise, 100V peak.
4. Other connectors available.
5. The unit is rated at 95-125 VAC and 208-235 VAC, 50/60 Hz, to satisfy EC standards for
–10% to 6% AC line voltage.
ALL UNITS IN INCHES
Meyer Sound Laboratories, Inc.
2832 San Pablo Avenue
Berkeley, CA 94702
tel: 510.486.1166
fax: 510.486.8356
e-mail: [email protected]
http: www.meyersound.com
UULL
CC
UULL
®®
LISTED
3K59
COMMERCIAL
AUDIO SYSTEM
Meyer Sound Laboratories
has devoted itself to
designing, manufacturing,
and refining components
that deliver superb sonic
reproduction. Every part of
every component is
designed and built to
exacting specifications
and undergoes rigorous,
comprehensive testing
in the laboratories.
Research remains an
integral, driving force
behind all production.
Meyer strives for sound
quality that is predictable
and neutral over an
extended lifetime and
across an extended range.
Made by Meyer Sound, Berkeley, CA, USA
European Office:
Meyer Sound Germany
GmbH
Carl Zeiss Strasse 13
56751 Polch, Germany
© 1998 Meyer Sound Laboratories, Inc.
All rights reserved
DS-2P - 04.035.013.01B
Rear Panel Locations (U.S. Version)
Altri manuali per DS-2P
1
Altri manuali Meyer Sound Altoparlanti
Meyer Sound
Meyer Sound UPA-1C Manuale utente
Meyer Sound
Meyer Sound JM-1P Manuale utente
Meyer Sound
Meyer Sound Studio Reference Monitor System 833 Manuale utente
Meyer Sound
Meyer Sound Compact VariO UPJ-1P Manuale utente
Meyer Sound
Meyer Sound M2D Manuale utente
Meyer Sound
Meyer Sound UPM-1P Manuale utente
Meyer Sound
Meyer Sound MSL-10A Manuale utente
Meyer Sound
Meyer Sound UPA-2C Manuale utente
Meyer Sound
Meyer Sound CQTM Series Manuale utente
Meyer Sound
Meyer Sound Reinforcement Loudspeaker MSL-3A Manuale utente
Meyer Sound
Meyer Sound MICA Manuale utente
Meyer Sound
Meyer Sound 1100-LFC Manuale utente
Meyer Sound
Meyer Sound UPJunior Manuale utente
Meyer Sound
Meyer Sound Stella-8C Manuale utente
Meyer Sound
Meyer Sound Mina Manuale utente
Meyer Sound
Meyer Sound UltraSeries UPA-2C Manuale utente
Meyer Sound
Meyer Sound Ashby-5C Manuale utente
Meyer Sound
Meyer Sound DS-2 Manuale utente
Meyer Sound
Meyer Sound DS-4P Manuale utente
Meyer Sound
Meyer Sound Stella-4 Constellation Manuale utente
