MFC SPEED CREED Guida all'applicazione

3334 North Booth Street, Milwaukee WI 53212 U.S.A. 414.964-4550 I

414-964-4503 EMAIL: info@metalforms.com I WEBSITE:

REV.03

ROLLER SCREED

OPERATION & PARTS MANUAL

REV.03_9/2021

OPERATION & PARTS MANUAL

The following products are covered in this manual:

Part Number

Description

780-204

END FRAME ASSEMBLY POWER SECTION, ROLLER SCREED

780-205

END FRAME ASSEMBLY, IDLER END, ROLLER SCREED

780-005

EXTENSION ASSEMBLY, 5’ ROLLER SCREED

780-006

EXTENSION ASSEMBLY, 6’ ROLLER SCREED

780-007

EXTENSION ASSEMBLY, 7’ ROLLER SCREED

780-008

EXTENSION ASSEMBLY, 8’ ROLLER SCREED

780-009

EXTENSION ASSEMBLY, 9’ ROLLER SCREED

780-010

EXTENSION ASSEMBLY, 10’ ROLLER SCREED

780-020

ROLLER ASSEMBLY, 10’-20’ (SET OF 3 ROLLERS & HARDWARE)

780-030

ROLLER ASSEMBLY, 21’-30’ (SET OF 3 ROLLERS & HARDWARE)

780-100

SPRAY SYSTEM, TANK/PUMP ASSEMBLY

780-10X

SPRAY SYSTEM, BOOM ASSEMBLIES (5’, 6’, 7’, 8’, 9’, 10’)

780-305

WALKWAY ASSEMBLY, 5’

780-310

WALWAY ASSEMBLY, 10’

This manual was first issued July 2020

Legal Notice

The information contained in this General Safety Guidelines Sheet was considered the best

available at the date of issue. However, no warranty is made or implied that the information is

accurate or complete. It is the user's obligation to evaluate and use this product safely and to

comply with all applicable laws and regulations.

All information, specifications, and illustrations in this manual are subject to change without notice

and are based on the latest information at the time of publication. No part of this manual may be

reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose,

without the express written permission of Metal Forms Corporation (MFC). MFC assumes no

responsibility or liability for any errors or inaccuracies that may appear in this manual.

REV.03_9/2021

Table of Contents

Table of Contents.......................................................................................................................................................................................................................................2

Manual Information ....................................................................................................................................................................................................................................4

Serial Number Identification.......................................................................................................................................................................................................................5

Spare/Replacement Parts Ordering Information.......................................................................................................................................................................................6

Machine Specifications..............................................................................................................................................................................................................................7

MACHINE.............................................................................................................................................................................................................................................7

HYDRAULIC SYSTEM.........................................................................................................................................................................................................................7

ROLLER/SLINGER TUBES.................................................................................................................................................................................................................7

SUPPORT FRAMES............................................................................................................................................................................................................................7

SPRAY SYSTEM.................................................................................................................................................................................................................................7

Engine Specifications.................................................................................................................................................................................................................................8

Engine Wiring Diagram..............................................................................................................................................................................................................................9

26A CHARGING SYSTEM...................................................................................................................................................................................................................9

Machine Dimensions................................................................................................................................................................................................................................10

Safety Section..........................................................................................................................................................................................................................................11

State/Federal Regulations .................................................................................................................................................................................................................11

Safety Information..............................................................................................................................................................................................................................12

Safety Symbols ..................................................................................................................................................................................................................................13

General Safety Guidelines.................................................................................................................................................................................................................14

Machine Operation...................................................................................................................................................................................................................................18

Machine Basics..................................................................................................................................................................................................................................18

Loading/Unloading Your Machine......................................................................................................................................................................................................18

Startup Procedure..............................................................................................................................................................................................................................19

Controls/Features...............................................................................................................................................................................................................................20

Starting Machine Operation.........................................................................................................................................................................................................21

Stopping the Machine..................................................................................................................................................................................................................21

Service & Adjustments.............................................................................................................................................................................................................................22

Height Adjustment on Slinger ............................................................................................................................................................................................................22

Changing Length & Tubes .................................................................................................................................................................................................................23

Maintenance.......................................................................................................................................................................................................................................24

Daily Maintenance.......................................................................................................................................................................................................................24

Weekly Maintenance...................................................................................................................................................................................................................24

Seasonal Maintenance................................................................................................................................................................................................................24

Parts.........................................................................................................................................................................................................................................................25

Full Assembly.....................................................................................................................................................................................................................................25

Full Assembly – BOM.........................................................................................................................................................................................................................25

End Frame – Power Assembly ..........................................................................................................................................................................................................25

End Frame – Power Assembly (Continued) ......................................................................................................................................................................................27

End Frame – Power Assembly BOM.................................................................................................................................................................................................28

Engine Assembly ...............................................................................................................................................................................................................................29

Engine Assembly BOM ......................................................................................................................................................................................................................30

Hydraulics Assembly..........................................................................................................................................................................................................................31

Hydraulics BOM .................................................................................................................................................................................................................................32

Hydraulic Assembly - Tank ................................................................................................................................................................................................................33

REV.03_9/2021

Hydraulics Assembly – Pump/Motors................................................................................................................................................................................................34

Hydraulics Assembly – Pump/Filter/Manifold/Cooler/Tank ...............................................................................................................................................................35

Hydraulics Assembly – Pump/Filter/KS Manifold/Kick Stand............................................................................................................................................................36

Hydraulics Assembly –Kick Stand .....................................................................................................................................................................................................37

Hydraulics Assembly – Tandem Pump..............................................................................................................................................................................................38

Hydraulics Assembly – Proportional Control Manifold.......................................................................................................................................................................39

Hydraulics Assembly – Motor ............................................................................................................................................................................................................40

Hydraulics Assembly – Hydraulic Cooler...........................................................................................................................................................................................41

Hydraulics Assembly – Kickstand Manifold.......................................................................................................................................................................................42

Hydraulics Assembly – Filter..............................................................................................................................................................................................................43

Fuel System Assembly.......................................................................................................................................................................................................................44

Fuel System BOM..............................................................................................................................................................................................................................45

Battery Assembly ...............................................................................................................................................................................................................................46

Battery BOM.......................................................................................................................................................................................................................................46

End Frame – Control Panel Assembly...............................................................................................................................................................................................47

End Frame – Control Panel BOM......................................................................................................................................................................................................48

Display Panel Assembly.....................................................................................................................................................................................................................49

Display Panel BOM............................................................................................................................................................................................................................49

Platform Assembly .............................................................................................................................................................................................................................50

Platform BOM.....................................................................................................................................................................................................................................50

End Frame – Lite (Idler) Assembly ....................................................................................................................................................................................................51

End Frame – Lite (Idler) BOM............................................................................................................................................................................................................52

Support Frame Assembly...................................................................................................................................................................................................................53

Support Frame BOM..........................................................................................................................................................................................................................53

Roller Assembly .................................................................................................................................................................................................................................54

Roller BOM.........................................................................................................................................................................................................................................54

Spray System, Tank/Pump Assembly (Option) .................................................................................................................................................................................55

Spray System, Tank/Pump Assembly BOM......................................................................................................................................................................................55

Spray System, Tank/Pump Components Assembly (Option)............................................................................................................................................................56

Spray System Tank/Pump Components BOM ..................................................................................................................................................................................57

Spray System, Boom Assembly (Option) ..........................................................................................................................................................................................58

Spray System, Boom Assembly BOM ...............................................................................................................................................................................................59

Spray System, Boom Assembly BOM (Continued) ...........................................................................................................................................................................60

Walkway Assembly, 5’ (Option) .........................................................................................................................................................................................................61

Walkway Assembly, 5’ BOM..............................................................................................................................................................................................................61

Walkway Assembly, 10’ (Option).......................................................................................................................................................................................................62

Walkway Assembly, 10’ BOM............................................................................................................................................................................................................62

Walkway, 5’ (Option)..........................................................................................................................................................................................................................63

Walkway, 5’ BOM...............................................................................................................................................................................................................................63

Walkway, 10’ (Option)........................................................................................................................................................................................................................64

Walkway, 10’ BOM.............................................................................................................................................................................................................................64

Walkway Ballast Assembly, 5’ (Option).............................................................................................................................................................................................65

Walkway Ballast Assembly, 5’ BOM..................................................................................................................................................................................................65

Walkway Bracket Assembly (Option).................................................................................................................................................................................................66

Walkway Bracket Assembly BOM......................................................................................................................................................................................................66

REV.03_9/2021

Manual Information

This manual is meant to provide safety, operation, and

maintenance procedures for your Speed Screed Roller

machine.

For your own safety and protection from personal injury,

carefully read, understand, and observe the safety

instructions described in the following sections. Keep this

manual with the machine at all times. Additional manuals

can be provided by contacting the dealer you purchased

the machine from, or Metal Forms Corporation directly.

You can find a list of contents and corresponding page

numbers for the following sections in this manual:

Your engine and battery are covered under their own manufacturer warranty and are not

covered or manufactured by Metal Forms Corporation. Complete any required warranty

information as specified by the manufacturer in their instructions, which you can find inside the

control panel of the machine.

Any parts, operation, or repair manuals should be obtained by contacting the manufacturer

directly.

PARTS

SERVICE

SAFETY

OPERATION

REV.03_9/2021

Serial Number Identification

If you need to order parts, you will be asked for your machine serial number. The serial

number found on the identification plate is a twelve-digit number and corresponds to the below

breakdown:

R-121381-03-19-1

Please note your machine serial number and information below:

R – Roller Screed

L – Speed Screed Light Duty

Blank – Speed Screed Heavy

Order

Number

Month

Order

Line

Year

Your Serial Tag can be found on the left side of the control panel.

Serial Number: ________________________________________

Date Purchased: ______________________________________

Purchased From: ______________________________________

REV.03_9/2021

Spare/Replacement Parts Ordering Information

The Parts section of this manual gives detailed assembly drawings and Bill of Materials

(BOMs) to aid in finding replacement parts for your machine.

Please note that all the information, specifications, and illustrations in this manual are subject

to change without notice and are based on the latest information available at the time of

printing.

To order your spare/replacement parts, please contact the dealer you purchased your machine

from, or you can contact Metal Forms Corporation directly at 414-964-4550. You can also

check for parts on our website at www.metalforms.com

FIND US ONLINE:

www.metalforms.com

@metalforms

www.youtube.com/MetalForms53212

REV.03_9/2021

Machine Specifications

MACHINE

Machine weight (15’):

3,537 lbs. [1604kg]

Approximate weight per foot for additions:

119 lbs. [54kg]

Hydraulic Oil Reservoir (ISO 46):

10 gallons [37.85L]

Available machine lengths (in 1’ increments):

10’-30’ [3m-9.1m]

Fuel Reservoir:

12 gal. [45.42L]

HYDRAULIC SYSTEM

Hydraulic motor attachment to each tube:

Direct drive via keyed bushing & bolt flange

Roller tube controls:

Independent electronic variable speed

control to drive rollers & slinger roller

Drive roller speed:

0’-125’ Per minute [0-.64mps]

Slinger roller speed:

150 rpm

Kickstand travel:

16” [406mm]

Kickstand extend speed:

1.2” per second [30.5 mm/s]

Kickstand retract speed:

1.8” per second [45.7 mm/s]

An electronically controlled tandem pump systemdrives the drive and slinger rollers

independently. The kickstand is standard on all machines and is controlled via two buttons at

the top of the drive roller joystick. It includes a monitoring light to indicate when the kickstand is

fully extended / retracted.

ROLLER/SLINGER TUBES

Diameter:

8” SCH.40 Pipe (Ø8.625”) [Ø219.1mm]

Wall thickness:

0.322” [8.18mm]

Weight per foot:

28.55 lbs. [12.95kg]

SUPPORT FRAMES

Frame Extension Size

Qty. Horizontal Support Tubes

Weight

5’ frame extension:

155 lbs. [70.3kg]

6’ frame extension:

198 lbs. [89.8kg]

7’ frame extension:

240 lbs. [108.8kg]

8’ frame extension:

260 lbs. [117.9kg]

9’ frame extension:

302 lbs. [137.0kg]

10’ frame extension:

321 lbs. [145.6kg]

All frame sections are made from 2”x6”x1/8” and 2”x2”x1/8” steel tubes with 3/8” bolt plates.

Operator work platform comes standard, and an Idler end platform and/or counterweight is

available as an optional accessory.

SPRAY SYSTEM

Tank capacity:

50 gal. [189.27L]

Nozzles per feet:

Approx. 0.5 (depending on machine length)

Hose attachment:

Included w/ hand spray nozzle & hose reel

REV.03_9/2021

Engine Specifications

HONDA GX690 22hp V-TWIN

Engine Type

Air-cooled 4-stroke OHV

Bore x Stroke

78 mm X 72 mm

Displacement

42 in3[688 cm3]

Net Power Output*

22.1 bhp [16.5 kW] @ 3,600 rpm

Net Torque

35.6 lb-ft [48.3 Nm] @ 2,500 rpm

PTO Shaft Rotation

Counterclockwise [from PTO shaft side]

Compression Ratio

9.3:1

Lamp/Charge coil options

26A

Carburetor

N/A

Ignition System

Full transistorized ignition

Starting System

Shift Type

Lubrication System

Full Pressure

Governor System

Electronic (STR Governor)

Air cleaner

Paper

Oil Capacity

2.1 US qt [2.0L]

Fuel

Unleaded 86 octane or higher

Dry Weight

104.7 lbs. [47.5 kg]

Length

13.1" [333 mm]

Width

19.0" [483 mm]

Height

17.2" [438 mm]

*The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and

measured in accordance with SAE J1349 at 3,600 rpm (net power) and at 2,500 rpm (max net torque). Mass production engines may vary

from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the

operating speed of the engine in application, environmental conditions, maintenance, and other variables.

Specifications are subject to change without notice.

Indice

Manuali Passeggino popolari di altre marche

Hauck

Hauck Priya Trioset Manuale utente

CHILDHOME

CHILDHOME CWQDN Manuale utente

Dreamer Design

Dreamer Design Rebound GST Manuale utente

Britax

Britax STEELCRAFT AGILE Manuale utente

Graco

Graco 7427 Manuale utente

Comfort

Comfort COMPASS Manuale utente

OBaby

OBaby Aura Manuale utente

Tutek

Tutek Tirso Manuale utente

Babify

Babify Dual Plus Manuale utente

Graco

Graco Stroller Manuale utente

Special Tomato

Special Tomato Jogger Manuale utente

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER Manuale utente

Otto Bock

Otto Bock Kimba neo Manuale utente

Milly Mally

Milly Mally ROYAL Guida rapida

Hauck

Hauck DUETT 3 PRAM Manuale utente

BOB

BOB DUALLIE Manuale utente

Nuna

Nuna Pepp Manuale utente

Britax

Britax B2 Manuale utente