Miccus Stealth Mini Manuale utente
Miccus® Stealth Mini
Water Resistant Sport Headphones Featuring
Bluetooth® 5 Wireless Technology
Model No.: MSMSH-50
Contents:
Introduction & Overview ...................................2
Specifications & Contents ..................................3
LED Light Indicator Guide & Charging ........................4
Powering On/Off & Pairing .................................5
Reconnection .............................................6
Pairing to 2 Devices & Troubleshooting ......................7
Factory Reset & Changing Ear Tips ...........................8
Wearing the Stealth Mini ...................................9
Phone Operations ........................................11
Playing Music & Safety Information ........................13
Care, Maintenance & Support .............................14
Thank you for choosing the Miccus® Stealth Mini;
In-ear Sport headphones featuring Bluetooth® 5
wireless technology.
Featuring Bluetooth® 5 wireless technology, the water resistant
Miccus® Stealth Mini Headphones are designed for sport and
portability. Stream music or make a phone call; the Miccus® Stealth
Mini Headphones are compatible with the latest smartphones, tablets,
and other transmitting devices supporting the A2DP and HFP (Hands
free) Bluetooth® profiles. Take them anywhere! They easily fit in your
pocket, purse or backpack.
Miccus® Stealth Mini Overview
1Ear Tips 5LED Indicator
2 Ear Hook 6 Microphone
3Volume Up/Down 7Cable Management Clip
4 Multi-function Button 8 USB Charging Jack
2
3
Product Specifications
Bluetooth® version: 5
Bluetooth® profiles supported: HFP/HSP/A2DP/AVRCP/SPP1/PBAP
Codec Support: SBC/AAC
Bluetooth® wireless operating range: up to 60ft (20M)
Audio Impedance: 16 Ohms
Frequency Response: 20Hz-20KHz
Charging Time: 1.5 hours
Music Play Time: Up to 10 hours
Standby Time: up to 800 hours
Package Contents
Miccus® Stealth Mini Headphones
Silicone Ear Tips - 3 sizes (Small, Medium & Large)
USB Charging Cable
EVA Hard Case
User Manual
4
Getting Started
LED Indicator Light Guide
The Stealth Mini communicates with you via LED indicator lights, the
following is a brief description:
LED INDICATOR STATUS OF HEADSET
LED flashes Red and Blue
rapidly Pairing mode, Searching for a device
LED flashes Blue once
every 2 seconds
Standby mode (not connected to any
device)
LED flashes Blue twice every
5 seconds Connected to a device
LED flashes Red Low battery, Need Charging
LED Solid Red Headphones are charging
Charging the Miccus® Stealth Mini
Fully charge the Miccus® Stealth Mini before first use. Use the included
USB charging cable.
1. Open the cover of the USB charging jack, and plug in the USB
charging cable.
2. Connect the other end of the USB charging cable to any USB port
or USB phone charger. When the indicator light is solid red, the
headphones are charging. When the red indicator light is off, the
headphones are fully charged.
3. Charging takes approximately 90 minutes.
Note:
When the headset emits two beeps continually and the indicator
light is flashing red, The Stealth Mini needs a charge.
When the Stealth Mini is paired to a phone or tablet, IOS devices
will display the battery life of the Stealth Mini.
Powering the Headset On / Off
FUNCTIONS OPERATION VOICE CONFIRMATION
Power On
Press and hold the
Multi-Function Button
for 3 seconds until the
LED indicator flashes blue.
“Power On”
Press and hold the
Multi-Function Button
for 5 seconds until the
red LED flashes and then
turns off.
Note: In order to save power, the Miccus® Stealth Mini will turn off
automatically if there is no device connected after 5 minutes.
Pairing the Miccus® Stealth Mini
To use your Miccus® Stealth Mini, you must pair or connect it with a
capable transmitter. This process takes less than 5 minutes as pairing
creates a wireless bridge between your audio source device and the
headphones. The Miccus® Stealth Mini receives audio from Bluetooth®
wireless enabled transmitters such as phones, tablets, PCs or adapters
such as the Miccus® Swivel Jack RTX or Home RTX 2.0.
Please follow the below steps in a timely manner, without interruptions
for best results:
1.
headphones or speakers.
2.
3. Put the Stealth Mini into pairing mode:
indicator beeps twice.
5
Release the MFB. The Stealth Mini is now searching for a
4.
5.
and select “Miccus Stealth Mini” from the list of devices shown.
6.
“0000” and press “OK”. Not all devices require a code.
7. When the pairing is completed, the Stealth Mini voice says
5 seconds.
8. Pick your favorite tune on your audio source device, press play and
then kick back and enjoy.
Note:
If there are pairing problems, the Stealth Mini will default to
standby after two minutes. Turn off the Stealth Mini and repeat
the pairing process.
When in standby mode, quickly press and release the MFB and the
Stealth Mini will attempt to connect with the last paired device.
Automatic Reconnection
After initial pairing, the Stealth Mini will automatically reconnect to the
last paired device upon subsequent uses.
1.
2.
Note: When in use, if the Stealth Mini is moved beyond the
connection range, it will continue to attempt reconnection for up
to 5 minutes. If moved back within range, it will automatically
reconnect. If reconnection cannot be completed in 5 minutes the
Stealth Mini will automatically power off.
6
Pairing the Miccus® Stealth Mini with 2 Devices at
the same time
1.
2.
3. Next, Pair the Stealth Mini to the second device just as you did for
4. Once the second device is paired with the Stealth Mini, turn on
Note: On some phones you may need to select Miccus® Stealth Mini
from the paired devices list to get it to reconnect.
Troubleshooting
If you are unable to connect your headphones and your phone, please
try the following:
1.
2. Ensure the headphones are paired with your mobile phone.
3.
4. Ensure the headphones are within range of your phone or other
such as walls or other electronic devices that might interfere with
If the above steps do not solve your problem, please recharge your
headphones and reboot your mobile phone. If something gets
corrupted during the initial pairing, you may need to remove the
Miccus® Stealth Mini from the paired devices list and then re-add it
as a brand new device.
If all else fails, perform a Factory Reset of the Stealth Mini.
7
Indice
Altri manuali Miccus Cuffie
