Microchip Technology TA100 Manuale utente

AC164167

TA100 8-Pin SOIC Socket Board User Guide

Introduction

The TA100 8-pin SOIC mikroBUS™ compatible socket board has been developed for use with any of Microchip’s

microcontroller boards that support a MikroElektronika mikroBUS interface. The board’s dimensions match the

medium-sized add-on board as defined in the mikroBUS specification. Through use of an adapter board, the socket

board can also be used with Microchip microcontroller development boards that support an Xplained Pro Interface.

The TA100 secure elements are one-time-programmable devices. Having a socket board allows for a customer to

reuse the board with multiple TA100 sample devices for a given application or for multiple different applications. The

8-pin SOIC socket board is capable of being used with both the I2C and SPI interface versions of the TA100 device.

Figure 1. TA100 8-Pin SOIC Socket Board

Table of Contents

Introduction.....................................................................................................................................................1

1. Hardware Description..............................................................................................................................3

1.1. Schematic and Key Features....................................................................................................... 3

1.2. Board Configuration..................................................................................................................... 3

1.3. Supply Current Measurement...................................................................................................... 4

1.4. Hardware Documentation.............................................................................................................4

2. Connecting the Board............................................................................................................................. 6

2.1. Xplained Pro Connections............................................................................................................6

2.2. Microchip Explorer 16/32 Connections.........................................................................................8

2.3. Automotive Networking Development Board Connections...........................................................8

3. Software Tools.......................................................................................................................................10

3.1. myMicrochip............................................................................................................................... 11

4. Revision History.................................................................................................................................... 13

The Microchip Website.................................................................................................................................14

Product Change Notification Service............................................................................................................14

Customer Support........................................................................................................................................ 14

Microchip Devices Code Protection Feature................................................................................................ 14

Legal Notice................................................................................................................................................. 14

Trademarks.................................................................................................................................................. 15

Quality Management System....................................................................................................................... 15

Worldwide Sales and Service.......................................................................................................................16

AC164167

1. Hardware Description

1.1 Schematic and Key Features

• One 8-Pin SOIC Socket (U1)

• One mikroBUS Connector (J1, J2)

• Five Selection Jumpers for selecting either an I2C or SPI Interface (J3 to J7)

• On-Board 4.7 kΩ I2C Resistors (R2, R3)

• On-Board LED Power Indicator (LD1)

• Power Jumper for selecting 3.3V or 5V power (J3)

• Optional GPIO Header (J9) Not populated

Figure 1-1. TA100 8-Pin SOIC Socket Board Schematic

1.2 Board Configuration

TA100 8-Pin SOIC Socket Board Jumper Configurations

• SPI Connections: J3, J4, J5, J6 and J7 in position closest to socket (white band labeled with SPI)(1)

• I2C Connections: J3, J4, J5, J6 and J7 in position furthest from socket (white band labeled with I2C)(1)

• 3.3V Power: J10 with shunt across 3V3 and PWR positions(2)

• 5.0V Power: J10 with shunt across 5V and PWR positions(2)

Notes:

1. Jumpers J3, J4, J5, J6 and J7 must all be set with position pins 1 and 2 shorted (SPI) or all set with position

pins 2 and 3 shorted (I2C) for proper operation in a given interface mode.

2. The I/O levels of the GPIO, SPI and I2C signals will track with the supply voltage.

AC164167

Hardware Description

SPI Configuration I2C Configuration

1.3 Supply Current Measurement

The current consumption of the TA100 device can be measured by using the AC164167 8-pin socket board. The only

devices on the board that will consume power are the TA100 socketed device, the Power LED and the I2C pull-up

resistors. Follow these steps to measure the current:

1. Modify the board to remove the resistor R1 which is in series with the LED. This will remove the current

through the LED from the total measured current.(1)

2. Install the TA100 device into the socket.

3. Install the socket board into the host system with the appropriate power settings.

4. Select either 3.3V or 5V power for the measurement.(2)

5. Connect the high side of the ammeter to the 3.3V or 5V supply.

6. Connect the low side of the ammeter to the common PWR signal of the header.

7. Current measurements can now be taken by running various TA100 commands and measuring the current. (3)

Notes:

1. For lower accuracy current measurements this resistor may be kept in the circuit. A separate measurement of

the current through just the LED path should be made prior to measuring the TA100 device currents. This

value can then be subtracted from the total current measured.

2. The host board provides the power to the mikroBUS extension board so whichever supply is selected must

match the capabilities and setting used on the host board.

3. When measuring the current of I2C devices, the measurement will include the I2C pull-up currents used to pull

up the bus. For SPI signals the pull-ups are internal to the device and will also factor into the total current

consumed.

1.4 Hardware Documentation

Additional documentation for the kit can be found on the Microchip Website for the AC164167.

AC164167

Hardware Description

This includes:

1. Board Design Documentation including Schematics and 3D Views.

2. Gerber Files.

3. TA100 8-Pin SOIC Socket Board User Guide (AC164167).

For other kits referenced in this document please check website information associated with those kits. This includes:

1. ATSAMV71-XULT SAMV71 Xplained Ultra Evaluation Kit.

2. ATMBUSADAPTER-XPRO XPRO to mikroBUS Adapter.

3. Explorer 16/32 Development Kit (DM240001-2).

4. dsPIC33CK 16-Bit PIC® Microcontroller.

Related Hardware Kits

Microchip also offers the AC164166 14-Pin SOIC Socket Kit for the TA100. This developers kit offers a single TA100

device with both a SPI and I2C Interface.

AC164167

Hardware Description

2. Connecting the Board

The form factor of the AC164167 development board was chosen because Microchip has heavily adopted the use of

the mikroBUS connector on host boards. Many of Microchip’s development platforms will support one or more

mikroBUS interfaces. These include:

• Microchip Explorer 16/32 Development Board

• MPLAB® Xpress Evaluation Board

• Automotive Networking Development Board

• PIC® Curiosity Boards

• PIC Curiosity Nano Boards

• AVR® Curiosity Nano Boards

• SAM Xplained-Pro microcontroller development boards when used with an ATMBusAdapter

2.1 Xplained Pro Connections

By using an adapter board, the AC164167 development board can still be used with Microchip development boards

that only support the Xplained Pro interface. Figure 2-1 shows the full assembly of the AC164167 TA100 8-Pin SOIC

Socket Board , the ATMBUSADAPTER-XPRO and an ATSAMV71-XULT Development Board.

Figure 2-1. Connections to an Xplained Pro Development Platform

1. AC164167 8-Pin

Socket

Development Board.

2. ATMBUSADAPTER-

XPRO.

3. ATSAMV71-XULT

Development Board.

4. TARGET USB Port.

5. DEBUG USB Port.

6. External Power Jack

Input.

Powering the SAMV71-XULT Board

AC164167

Connecting the Board

Multiple options exist for powering the SAMV71-XULT Development Board. Depending on the total current

requirements different options are allowed. Please see the SAMV71-XULT User Guide for more information.

1. External Power Jack Input.

– 2.1 mm barrel connector

– 5-14V input supply Maximum current of 2.0A

– 12V 18W Power Adapter Option: Triad Magnetics WSU120-1500

2. Embedded Debugger USB Connection. Max. of 500 mA.

3. Target USB Connection. Max. of 500 mA.

4. External Power Header.

– 2-pin 100 mil Header

– Direct 5V Supply

– Max. 2A of current

ATMBUSAdapter Power Settings

The ATMBUSAdapter allows power to be connected to the MikroBus Host adapter either directly through the XPRO

interface or by providing external power through the EXT header. It is important that all jumpers are connected

correctly before connecting to the SAMV71-XULT or other boards with an XPRO interface in order to prevent possible

damage to the system.

Figure 2-2. ATMBUSAdapter Plus AC164167

1. Option 1: Direct Power from the XPRO Extension

– Determine if the XPRO Board outputs a 3.3V or 5.0V supply voltage.

– Connect the J10 shunt “C”of the AC164167 to the appropriate 3.3V or 5.0V supply.

– Connect the ATMBUSAdapter power shunt “A” to the same voltage as the XPRO Supply.

2. Option 2: External Power Connected to the ATMBUSAdapter.

– Remove the Power Shunt “A” from the ATMBUSAdapter. This disconnects power from the XPRO Header.

– Connect either 3.3V or 5.0V external power to the Ext Header “B” on the ATMBUSAdapter

– Make sure the J10 shunt on the AC164167 is placed across the correct connections for the External

Power Supply chosen.

Additional Resources

•SAMV71 Kit Information

•SAMV71- Xplained Ultra User Guide

•SAMV71 Microcontroller

• Additional Tools available via myMicrochip

AC164167

Connecting the Board

2.2 Microchip Explorer 16/32 Connections

The AC164167 extension board can be connected to any microcontroller board that contains a mikroBUS Host

Header. The 8-pin socket board can either be configured for the I2C or SPI interface as shown in section 1.2 Board

Configuration. The diagram below shows a configuration using the Microchip Explorer 16/32 Development Board and

the dsPIC33CK 16-bit microcontroller. Note that the Explorer 16/32 board allows for a variety of 100-pin Microchip

microcontrollers to be used.

Figure 2-3. Connections to a Microchip Explorer 16/32 Development Board

1. AC164167 14-Pin Socket

Development Board.

2. dsPIC33CK 16-Bit

Microcontroller.

3. Microchip Explorer 16/32-Bit

development Board.

4. External Power Connection.

5. Micro-USB Connection.

6. Type-A USB Connection.

7. USB Type-C™ Connection.

8. PICkit™ On-Board

debugger micro-USB

Connection.

Powering the Board

Multiple options exist for powering the Explorer 16/32 Development board. Depending on the total current

requirements different options are allowed.

1. External Power Supply Connection.

– 8-15V Power Supply maximum current 1.3A

– Universal 9V Supply Adapter: AC002014

2. USB Connections allow up to 400 mA.

Additional Resources

•Microchip Explorer 16/32 Kit Information

•Microchip Explore16/32 User Guide

•dsPIC33CK

• Additional software tools available via myMICROCHIP

2.3 Automotive Networking Development Board Connections

The AC164167 extension board can be connected to any microcontroller board that contains a mikroBUS Host

Header. The 8-pin socket board can either be configured for the I2C or SPI interface as shown in section 1.2 Board

Configuration. The diagram below shows the Automotive Networking Development Board. This board is a low-cost

modular development system for Microchip’s 8-bit, 16-bit, and 32-bit microcontrollers targeting CAN and LIN network

related applications.

AC164167

Connecting the Board

Due to the modular nature of the Automotive Networking Development Board only a generic photo of the board is

shown below. There are multiple LIN and CAN Controllers that can be connected through the mikroBUS connectors

along with the AC164167 socket security board. Each of these devices can be connected via any of the mikroBUS

headers. A 100-pin plug-in microcontroller module (PIM) is also required for complete system operation. Microchip

has a variety of PIM modules that can be used with this development board. Examples of mikroBUS click boards and

PIM modules are shown in the Additional Resources section.

Figure 2-4. Connections to the Automotive Networking Development Board

1. Automotive

Networking

Development

Board.

2. mikroBUS™

Host headers.

3. Microcontroller

PIM Socket.

4. External Power

Connection.

5. Micro-USB

Power/Signal

Connection.

Powering the Board

Multiple options exist for powering the Automotive Networking Development Board.

1. External Power Supply Connection (7-30V).

– 9V external power supply adapter: (AC002014) 1.3A current

– 5 mm output jack with center-positive connection

– Place jumper across pins 2-3 of header J28 to enable

2. USB Connections.

– Micro-USB connection

– Place jumper across pins 1-2 of header J28 to enable

Additional Resources

The following list of resources should be considered as examples and not an exhaustive list. To identify additional

PIM or mikroBUS modules that may work with the Automotive Networking Development Board please go to

www.microchip.com.

•Automotive Networking Development Board Kit Information

•Automotive Networking Development Board User’s Guide

•MCP2003B click for LIN systems

•MCP25625 click with Microchip CAN controller

•ATA6563 click with Microchip CAN controller

•PIC18F66K80 100-pin PIM

• Additional software tools available via myMicrochip

AC164167

Connecting the Board

3. Software Tools

The TA100 is supported by a suite of software tools. These tools are only available under NDA. Please contact

Microchip to obtain an NDA and request access to the tools. Once an NDA has been signed, these tools will be made

available in the My Secure Software section of the customer’s myMicrochip account. Enhancements, upgrades and

additional tools will automatically be made available to any customer that has been enabled for the TA100 support.

Table 3-1. TA100 Software Tools

Item # Tool Name Description

1 TA100 Configurator

GUI and TA100

Library

The TA100 Configurator GUI provides the ability to configure and pseudo-provision

TA100 devices and to illustrate how the TA100 can be used for various applications

such as Secure Boot, Device Authentication and CAN-MAC. These applications

perform many cryptographic operations using the TA100 library.

2 CryptoAuthLib A flexible library implemented with a Hardware Abstraction Layer (HAL) that allows

the TA100 to be readily ported to other microcontrollers. The library provides

commands support for the TA100 and other Microchip CryptoAuthentication™

devices significantly speeding up application development.

3 AUTOSAR™ 4.3.1

CRYPTO driver.(1)

CRYPTO driver specifications provides an abstraction layer to integrate external

cryptographic device such as the TA100 into the AUTOSAR™ stack. This allows for

code to be portable between various applications that use different

microcontrollers.

Important: (1) For projects that use the AUTOSAR Driver the AUTOSAR™ Reference Stack will also be

needed. AUTOSAR™ is an open and standardized automotive software architecture. The TA100 has been

integrated into 3rd party AUTOSAR™ software stacks to aid customers in the implementation of

automotive applications. Please contact Microchip for a list of 3rd Party AUTOSAR™ stack vendors that

support the TA100.

Use Case Examples

Use Case examples utilize the TA100 Configurator GUI to demonstrate various sample applications that can be

implemented using the TA100 and SAM V71 microcontroller. These sample applications come with the necessary

microcontroller firmware, detailed application user guide and other documentation describing the use case in more

detail. Table 3-2 provides some of the use case examples that are available from the myMicrochip website. Upgrades

to these use case examples and additional use case examples will be provided over time via the same path.

Table 3-2. Use Case Examples

Item # Use Case

Examples(1)

Description

1 Device Authentication Provides device authentication by verifying the chain of trust using Signer and

Device Certificates and a Random Challenge. Upon successful authentication, a

known string is encrypted and written to a data element or read and decrypted from

a data element inside TA100.

2 Full Stored Secure

Boot with Pre-Boot

Secure Boot use case that upon initial boot calculates the digest of the firmware

code and then stores it for faster subsequent secure boots.

3 CAN Bootloader Secure Boot Use case that allows for secure firmware upgrade via the CAN Bus

using the SAMV71 microcontroller, K2L MOCCA-FD tool and PC-based GUI.

AC164167

Software Tools

Indice

Altri manuali Microchip Technology Scheda madre

Microchip Technology

Microchip Technology EVB-LAN7801 Manuale utente

Microchip Technology

Microchip Technology MCP6 series Manuale utente

Microchip Technology

Microchip Technology HV2903 Manuale utente

Microchip Technology

Microchip Technology 10-Pin MSOP Manuale utente

Microchip Technology

Microchip Technology MCP6S2 Series Manuale utente

Microchip Technology

Microchip Technology TC64X Manuale utente

Microchip Technology

Microchip Technology ATtiny3217 Xplained Pro Manuale utente

Microchip Technology

Microchip Technology ATtiny1607 Curiosity Nano Manuale di installazione

Microchip Technology

Microchip Technology PICDEM 2 Plus Manuale utente

Microchip Technology

Microchip Technology MCP1601 Manuale utente

Microchip Technology

Microchip Technology EVB-LAN9370 Manuale utente

Microchip Technology

Microchip Technology RN4870 Manuale utente

Microchip Technology

Microchip Technology MCP19035 Manuale utente

Microchip Technology

Microchip Technology PAC1934 Manuale utente

Microchip Technology

Microchip Technology PICkit 2 Manuale utente

Microchip Technology

Microchip Technology PIC18F47K42 Curiosity Nano Manuale di installazione

Microchip Technology

Microchip Technology ATWINC15x0 Series Supplemento

Microchip Technology

Microchip Technology MCP1663 Manuale utente

Microchip Technology

Microchip Technology PICkit 3 Manuale utente

Microchip Technology

Microchip Technology MTD6508 Manuale utente

Microchip Technology

Microchip Technology PL360G55CF-EK Manuale utente

Microchip Technology

Microchip Technology MCP37X10-200 Manuale utente

Microchip Technology

Microchip Technology Curiosity Low Pin Count Manuale utente

Microchip Technology

Microchip Technology UCS1003-1 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente