Microlife FR1MF1 Manuale utente
Microlife AG
Espenstrasse 139
9443 Widnau - Switzerland
www.microlife.com IB FR1MF1 EN 2113
Microlife NON CONTACT - FR1MF1
EN
FR1MF1
3
sec.
3
sec.
Read the instructions carefully before using this device
Microlife FR1MF1
Microlife FR1MF1
1
Microlife FR1MF1
EN
1Measuring Sensor
2 Tracking light
3 Display
4 Start Button
5 ON/OFF Button
6 Mode Switch
7 Battery Compartment Cover
8 Memory Button
9 All Segments displayed
AT Memory
AK Ready for Measuring
AL Measurement complete
AM Body Mode
AN Object Mode
AO Low Battery Indicator
AP Changing between Celsius and Fahrenheit
AQ Recall Mode
AR Recall the last 30 Readings
AS Measured Temperature too high
BT Measured Temperature too low
BK Ambient Temperature too high
BL Ambient Temperature too low
BM Error Function Display
BN Blank Display
BO Flat Battery
BP Date and Time Settings
BQ Beeper Function Setting
BR Replacing the Battery
2
FR1MF1
EN
Type BF applied part
Read the instructions
carefully before using this device.
This Microlife Thermometer is a high quality product incorporating
the latest technology and tested in accordance with international
standards. With its unique technology, this thermometer can provide
a stable, heat-interference-free reading with each measurement. The
instrument performs a self-test every time it is switched on to always
guarantee the specied accuracy of any measurements.
This Microlife Thermometer is intended for the periodic measurement
and monitoring of human body temperature at home. It is intended for
use on people of all ages.
This thermometer has been clinically tested and proven to be
safe and accurate when used in accordance to the operating
instruction manual.
Please read through these instructions carefully in order for you to
understand all functions and safety information.
3
Table of Contents
1. The Advantages of this Thermometer
2. Important Safety Instructions
3. How this Thermometer measures Temperature
4. Control Displays and Symbols
5. Set Date, Time and Beeper Functions
6. Changing between Body and Object Mode
7. Directions for Use
8. Changing between Celsius and Fahrenheit
9. How to recall 30 readings in Memory Mode
10. Error Messages
11. Cleaning and Disinfecting
12. Battery Replacement
13. Guarantee
14. Technical Specications
15. www.microlife.com
Guarantee Card (see Back Cover)
1.The Advantages of this Thermometer
Measurements in a matter of seconds
The innovative infrared technology allows measurement without
even touching the object. This guarantees safe and sanitary
measurements within seconds.
Multiple Uses (Wide Range Measurement)
This thermometer offers a wide measurement range from 0
°C to 100.0 °C (32.0 °F to 212.0 °F), meaning the unit can
be used to measure body temperature or it can be used to
measure surface temperature of the following examples:
• Milk surface temperature in a baby’s bottle
• Surface temperature of a baby’s bath
• Ambient temperature
Accurate and reliable
The unique probe assembly construction, incorporates an
advanced infrared sensor, ensuring that each measurement is
accurate and reliable.
4
FR1MF1
EN
Gentle and Easy to Use
• The ergonomic design enables simple and easy use of the
thermometer.
• This thermometer can even be used on a sleeping child without
causing any interruption.
• This thermometer is quick, therefore child-friendly.
Multiple Reading Recall
Users will be able to recall the last 30 readings within the date
and time record when entering the recall mode,
enabling efcient tracking of temperature variations.
Safe and Hygienic
• No direct skin contact.
• No risk of broken glass or mercury ingestion.
• Completely safe for use on children.
• Cleaning of the sensor can be done with an alcohol-moistened
cotton tissue.
Fever Alarm
10 short beeps and a red LCD backlight alert the patient that he/
she may have a temperature equal to or higher than 37.5 °C.
2. Important Safety Instructions
• This instrument may only be used for the purposes described in
this booklet. The manufacturer cannot be held liable for
damage caused by incorrect application.
• Never immerse this instrument in water or other liquids.
For cleaning please follow the instructions in the
«Cleaning and Disinfecting» section.
• Do not use the instrument if you think it is damaged or notice
anything unusual.
• Never open the instrument.
• A basic physiological effect called vasoconstriction can occur
in the early stages of fever, resulting in a cool skin effect. The
recorded temperature using this thermometer can, therefore,be
unusually low.
• If the measurement result is not consistent with the patient’s
5
finding or unusually low, repeat the measurement every
15 minutes or double check the result by another core body
temperature measurement.
•This instrument comprises sensitive components and must be
reated with caution. Refer to the storage and operating condi-
tions described in the «Technical Specications» section.
•Ensure that children do not use the instrument unsupervised; as
some parts are small enough to be swallowed.
• Protect it from:
− extreme temperatures
− impact and dropping
− contamination and dust
− direct sunlight
− heat and cold
• If the instrument is not going to be used for a prolonged period
the batteries should be removed
3. How this Thermometer measures Temperature
This thermometer measures infrared energy radiated from the
forehead as well as objects. This energy is collected through the
lens and converted to a temperature value.
Temperature readings obtained by scanning above the eyebrow
area will provide the greatest accuracy.
4. Control Displays and Symbols
• All segments displayed 9 : Press the ON/OFF button 5to
turn on the unit; all segments will be shown for 1 second.
•Ready for measurement AK : When the unit is ready for
measurement, the «°C» or«°F» icon will keep ashing while the
WARNING: Use of this instrument is not intended as
a substitute for consultation with your physician This
instrument is NOT waterproof so do not immerse in
liquids.
6
FR1MF1
EN
mode icon (body or object) will be displayed.
•Measurement complete AL : The reading will be shown on
the display 3 with the «°C»or«°F» icon and the mode icon
steady.
The unit is ready for the next measurement as soon as the
«°C» or «°F» icon is ashing again.
• Low battery indicator AO : When the unit is turned on, the
triangle icon will keep ashing to remind the user to replace the
battery.
5. Set Date, Time and Beeper Functions
•After the new batteries are tted, the year number ashes in
the display BP. You can set the year by pressing the START
button 4.To conrm and then set the month, press the M button
8.
• Press the START button 4to set the month. Press the M
button 8 to conrm and then set the day.
• Follow the instructions above to set the day, 12 or 24 hours
System mode, hours and minutes.
• Once you have set the minutes and pressed the M button 8,
the date and time are set and the time is displayed.
•If you want to change the date and time, press and hold the
M button 8down for approx. 3 seconds until the year number
starts to ashBP.Now you can enter the new values as
described above.
•Clicking the ON/OFF button 5during time setup(after battery
insertion) will remove the device from time setting Mode, the
LCD will show Date/ TIME icons respectively with “--:--”After
that press the ON/OFF button 5to start the test or if no further
action is taken within 20 seconds, the device will automatically
turn off.
•When the device is switched off, press and hold the ON/OFF
button 5for 5 seconds to set the beeper BQ. Press the ON/
OFF button5to turn the beeper on and off. The thermometer
Indice
Altri manuali Microlife Termometro
Microlife
Microlife NC 120 Manuale utente
Microlife
Microlife MT 1671 Manuale utente
Microlife
Microlife PT 200 Manuale utente
Microlife
Microlife 16F1 Manuale utente
Microlife
Microlife FR 100 Manuale utente
Microlife
Microlife as easy as 123 Manuale utente
Microlife
Microlife NC 100 Manuale utente
Microlife
Microlife NC 100 Manuale utente
Microlife
Microlife NC 150 Manuale utente
Microlife
Microlife MT 16E1 Manuale utente
Microlife
Microlife MT 300 Manuale utente
Microlife
Microlife NC 200 Manuale di istruzioni
Microlife
Microlife MT 400 Manuale utente
Microlife
Microlife MT 1931 Manuale utente
Microlife
Microlife IR 1DE1 Manuale utente
Microlife
Microlife FR 1DZ1 Manuale utente
Microlife
Microlife MT 60 Manuale utente
Microlife
Microlife IR 100 Manuale utente
Microlife
Microlife MT 600 Manuale utente
Microlife
Microlife IR 1DE1-S Manuale utente
