Midea MF-16FS15F Manuale utente
MIDEA.COM | 4008899315
Electric Fan
Mandarin
English
中文
READ AND SAVE THESE INSTRUCTIONS
16" Stand Fan
MODEL: MF-16FS15F
OWNER’S MANUAL
1
Read Rules for Safe Operation and Instructions Carefully.
CAUTION
1. If the supply cord is damaged, it must be replaced by manufacturer
or its service agent or a similarly qualified person in order to avoid
a hazard.
2. Indoor use only.
3. To protect against the risk of electrical shock, do not immerse the
unit, cord or plug in water or other liquid.
4. This appliance is not intended for use by persons (including c
hildren) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Young children should be supervised to ensure that they do not
play with the appliance.
5. When the appliance is not in use and before cleaning, unplug the
appliance from the outlet.
6. When the fan was assembled, the rotor blade guard shall not be
taken off anymore.
WARNING
1. Never insert fingers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Be sure fan is on a stable surface when operating to avoid overturning.
4. DO NOT use fan in window, rain may create electrical hazard.
5. Household use only.
RULES FOR SAFE OPERATION
②
①
22
INSTALLATION INSTRUCTIONS
Name of components
Pole
Motor
Motor shaft
Rear grill
Tighten
knob
Considerate Hint:
Remove ①②parts from the
component before performing
installation. Base
Right-angle bolt
Install by
aligning
Base Installation
Align the column with the
groove on the base and
fix them together using a
right-angle bolt.
3
Lock nut of grill
Lock nut of blade
Blade
Screw the lock nut of grill clockwise,
and in the meantime, fix the rear grill.
Lock nut of blade
anticlockwise,
and then install the
front fan cover.
Pull the blade to rotate after installing,
so as to ensure that the blade can be
normally rotated.
Front grill
Guard
Catch
1
2
3
1
2
3
Align Catch of the Front Guard
with the illustrated position of
the Rear Guard.
Press guards sequentially
with both hands.
Self-Catch Installation.
Front and Rear Guard Installation
4
Instructions for operation of body
INSTRUCTIONS FOR USE
Body key
Turn counterclockwise and loosen for
performing height adjustment.
Height Adjustment
Height Adjustment Key
Swing Pull-knob
Push-down to swing
Pull-up for static
Horizontal Swing
Tilt Adjustmen
Manual
3
2
1
0
OFF
ON
Do not rotate the timer counter-clockwise to “ON” from “120”.
Warm tips:
5
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.
6
Sila baca arahan-arahan keselamatan pengendalian dan penggunaan dengan teliti.
PERHATIAN
1. Sekiranya kord kuasa sudah rosak, ia mesti diganti oleh pengilang
atau ejen perkhidmatannya atau orang berkelayakan yang
seumpamanya bagi mengelakkan sebarang kemalangan.
2. Hanya untuk kegunaan di dalam rumah.
3. Untuk menghindari risiko berlakunya kejutan elektrik, jangan
rendamkan unit ini, kord atau plagnya di dalam air atau cecair
yang lain.
4. Perkakas ini bukan direka untuk digunakan oleh individu (termasuk
kanak-kanak) yang kurang upaya fizikal, deria atau mental, atau
kurang pengalaman dan pengetahuan melainkan pengawasan
atau arahan penggunaan perkakas ini telah diberi oleh orang
yang bertanggungjawab ke atas keselamatan mereka.
Kanak-kanak hendaklah diawasi bagi memastikan mereka tidak
mempermainkan perkakas ini.
5. Apabila perkakas ini tidak digunakan dan sebelum kerja
pembersihan, cabut plagnya dari soket.
6. Setelah kipas ini dipasang, penghadang pemutar bilah tidak boleh
ditanggalkan sama sekali.
AMARAN
1. Jangan masukkan jari, pensil, atau apa-apa objek lain menerusi penghadang ketika
kipas ini berpusing.
2. Tanggalkan plag sebelum kipas ini dipindah dari satu tempat ke tempat lain.
3. Pastikan kipas ini diletakkan pada permukaan yang stabil ketika beroperasi bagi
mengelakkan ia daripada terbalik.
4. Jangan letakkan kipas ini di tepi tingkap kerana air hujan mungkin menimbulkan
kebahayaan.
5. Hanya untuk kegunaan di dalam rumah.
ARAHAN KESELAMATAN PENGENDALIAN
②
①
7
ARAHAN-ARAHAN PEMASANGAN
Nama-nama bahagian
Tiang
Motor
Aci Motor
Penghadang
belakang
Petua:
Tanggalkan bahagian ①②
daripada komponen sebelum
pemasangan dijalankan. Tapak
Bolt bersudut
kanan
Pemasangan Tapak
Jajarkan kolum dengan
alur pada tapak dan
ketatkan kedua-duanya
menggunakan bolt
bersudut
kanan
Dipasang
secara
sejajar
Tombol
pengetat
8
Nat pengunci penghadang
Nat pengunci bilah kipas
Bilah kipas
Skru nat pengunci penghadang
mengikut arah ikut jam, pada masa
sama pasangkan penghadang belakang.
Mengunci Nat bilah
kipas mengikut arah
lawan jam, lepas itu
pasangkan penutup
hadapan.
Tarik bilah supaya berputar selepas
siap dipasang bagi memastikan ia
boleh berputar secara normal.
Penghadang
hadapan
Gancu
penghadang
1
2
3
1
2
3
Jajarkan gancu penghadang
hadapan dengan kedudukan
penghadang belakang seperti
mana digambarkan.
Tekan penghadang dengan
kedua-dua tangan
mengikut urutan.
Pemasangan gancu-
kendiri
Pemasangan penghadang hadapan dan belakang
9
Arahan pengendalian badan kipas
ARAHAN PENGENDALIAN
Butang kawalan
Pelarasan ketinggian
Butang pelarasan
ketinggian
Tombol tarik untuk
berayun
Tekan ke bawah
untuk berayun
Tarik ke atas untuk berhenti berayun
Berayun secara mengufuk
Pelarasan kecondongan
Secara manual
3
2
1
0
OFF
ON
Jangan putar pemasa mengikut arah lawan jam dari “120” ke “ON”.
Petua:
Putar mengikut arah lawan jam and
lonnggarkan untuk melaraskan ketinggian.
Indice
Lingue:
Altri manuali Midea Fan
Midea
Midea FS40-16JA Manuale utente
Midea
Midea FS40-11NR Manuale utente
Midea
Midea FT30-16A Manuale utente
Midea
Midea FS40-14BU Manuale utente
Midea
Midea NTH15-23AR Manuale utente
Midea
Midea FS40-12AR Manuale utente
Midea
Midea NF15-23UR Manuale utente
Midea
Midea FS40-12HR Manuale utente
Midea
Midea NF15-18U Manuale utente
Midea
Midea FS40-18BR Manuale utente
Midea
Midea FS40-14BU Manuale utente
Midea
Midea FT30-8MBC Manuale utente
Midea
Midea FZ10-17JRA Manuale utente
Midea
Midea FS40-15AR Manuale utente
Midea
Midea FT30-8MB Manuale utente
Midea
Midea NT15-13L Manuale utente
Midea
Midea FT23-21M Manuale utente
Midea
Midea FS40-11NR Manuale utente
Midea
Midea FT45-14AP Manuale utente
Midea
Midea MF-12FT8J Manuale utente
