2. Turn the big knob and adjust.
miniEngine Pro allow you to adjust sound effects through the
connected MIDI device
Connect miniEngine Pro to a MIDI device and adjust it through the device.
Refer to your MIDI device’s instruction for detailed operations. When you
adjust on your device volume / tone / reverb / pan / vibrato, the display on
miniEngine Pro changes accordingly.
Two MIDI devices connecting to miniEngine Pro
1 . Connect the two MIDI devices to miniEngine Pro’s MIDI IN and USB Host
respectively.
2. The two MIDI devices must be set in different channels.( select the channel
through the MIDI device )
3. Press any key on one of the devices and adjust on miniEngine Pro the tone
and the effect you want. Similarly, set up and adjust the tone and the
effect for another MIDI device. Then the devices are ready to play
simultaneously. ( Tone and effect can be adjusted from the MIDI devices )
Note: With two MIDI devices connected, the display on miniEngine Pro
shows the setting of the device that is last operated. Make sure what the
active device is before adjust tone and effect.
4. Factory reset: Press and hold preset Button A and C at the same time and
restart the unit. A confirmation message is shown on the display. Press
the big knob to confirm.
Display setting
Language / font size setting：Press and hold the big knob for 2 seconds to
enter to the display editor mode，select the language and font size by
pressing the large knob briefly, then turn the big knob to choose the
language and font size
