Migatronic OMEGA 3 YARD PULSE Manuale utente

QUICKGUIDE

OMEGA³ YARD BASIC

Setting the welding process

Press and hold (11A) to open for setting the welding process. Choose parameter by turning (10).

Set the chosen value by turning (11). To close this function, press (11A) brieﬂy.

Press (12) brieﬂy to turn display of Fxx (F = function) parameter names on/off.

50113783 A

MIG/MAG parameters

Actual welding current (A)

Figure 1

Table 1

Process 1.0 mm 1.5 mm 2.0 mm 3.0 mm

Material Wire Gas S

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

Fe 0.8 CO22.5 19.0 4.5 19.5 7.0 21.0 11.0 27.0

Fe 1.0 CO22.0 18.0 2.5 19.0 3.0 20.0 4.5 21.0

Fe 1.2 CO21.0 18.0 2.0 20.0 2.5 21.0 3.5 22.0

Fe 0.8 ArCO23.0 16.0 6.0 18.0 7.5 19.5 11.0 20.0

Fe 1.0 ArCO22.0 15.0 3.0 16.0 4.0 17.0 6.0 19.0

Fe 1.2 ArCO21.5 16.5 2.5 17.5 3.5 18.0 4.5 20.5

Fe 1.6 ArCO21.0 17.0 2.0 18.0 2.5 18.5

CrNi 1.0 ArCO23.0 15.0 4.0 16.0 6.0 17.0 8.5 20.0

CrNi 1.2 ArCO22.0 15.0 3.0 16.0 3.5 16.5 6.0 18.0

AI 1.0 Ar 4.0 14.5 6.0 15.0 7.5 16.0 9.0 19.0

AI 1.2 Ar 3.5 13.0 5.0 15.0 8.0 16.0 9.0 17.0

Process 4.0 mm 6.0 mm 10.0 mm

Material Wire Gas S

(m/min)

(V)

(m/min)

(V)

(m/min)

(V)

Fe 0.8 CO213.0 29.0 18.0 30.0 24.0 37.0

Fe 1.0 CO26.0 22.5 9.0 24.5 14.0 32.0

Fe 1.2 CO24.5 23.0 7.5 28.5 11.0 36.0

Fe 0.8 ArCO214.0 26.0 18.0 31.0 24.0 33.0

Fe 1.0 ArCO28.0 20.0 11.5 26.5 16.0 30.0

Fe 1.2 ArCO25.5 20.5 8.0 29.0 10.0 32.0

Fe 1.6 ArCO23.0 19.5 4.0 22.0 5.5 29.0

FeFlux 1.2 ArCO26.0 21.0 8.0 25.0 11.0 28.0

CrNi 1.0 ArCO29.0 25.0 10.0 27.0

CrNi 1.2 ArCO28.0 24.0 10.0 24.0 12.0 31.0

AI 1.0 Ar 11.0 22.0 13.0 25.0 15.0 27.0

AI 1.2 Ar 10.0 18.0 13.0 23.0 15.0 26.0

Welding table (set value)

MMA (electrode) parameters

When the MMA welding program is chosen, the operator is

allowed access to the following parameters only

Short circuitSet welding

current (A)

Pr.G / F31 Pre-gas (0.2 sec.)

S.St / F32 Soft start (1.0 m/min.)

bb.t / F37 Burn-Back (5 (0-30))

Po.G / F38 Post-gas (3.0 sec.)

SP.t / F39 Spot time (0.0 sec.)

m/min

GS.F / F22 (gas ﬂow) 0,5-27 l/min (only machines with IGC) (optional equipment)

HS.A / F11 Hotstart (25%)

HS.t / F12 Hotstart time (0,5 sek.)

Arc / F13 Arc force (25%)

1 Welding current, [A]

2 Wire feed speed, [m/min]

3 Welding voltage, [V]

4 Arc adjust

5 Lock symbol

Lock: Insert the SD lock card and choose ”1”,

“2” or “All” using (11).

Unlock: Reinsert the SD lock card to unlock

the control panel. For detail information,

see instruction manual.

6 Warning – Overheating

13 MMA welding

Press the key to choose MMA welding.

Long press recalls factory settings if indicator

is on.

14 MIG/MAG welding

Press the key to choose MIG/MAG welding.

Long press recalls factory settings if indicator

is on.

Program is optimised with regard to mix-gas

15 Wire inching

Press the key to feed the wire and adjust

the wire feed speed by turning (10)

simultaneously.

BASIC III

61111425

14 13 12

7 Fault indicator

See instruction manual

8Display of wire feed speed or

welding current

9 Display of welding voltage or

Arc adjust

10 Setting wire feed speed or

welding current

Turn the control knob to set the desired

wire feed speed (MIG/MAG) (see table 1) or

welding current (MMA).

11 Setting welding voltage,

Arc adjust and welding process

Turn the control knob to set the desired

welding voltage or Arc adjust (see table 1).

Short press (11A) (MIG/MAG): Change

between display of welding voltage and Arc

adjust.

Long press (11A): Opens for setting the

welding process (see ﬁgure 1).

12 Selecting trigger mode

Change between 2-stroke (indicator off) and

4-stroke (indicator on).

2-stroke: The welding process starts when

the torch trigger is activated and ends when

the torch trigger is released.

4-stroke: The welding process starts when

the torch trigger is activated and released

and ends when the torch trigger is activated

again.

Long press: Opens user menu. For detail

information, see instruction manual.

11A

QUICKGUIDE OMEGA³ YARD BASIC

Altri manuali Migatronic Sistema di saldatura

Migatronic

Migatronic Focus Tig 200 AC/DC Manuale utente

Migatronic

Migatronic SIGMA SELECT ROBO Manuale utente

Migatronic

Migatronic SIGMA Select 300 Manuale utente

Migatronic

Migatronic FOCUS STICK 160E PFC Manuale utente

Migatronic

Migatronic OMEGA YARD PULSE Manuale utente

Migatronic

Migatronic SCOUT 130 E Manuale utente

Migatronic

Migatronic Delta 200 DC HP PFC Manuale utente

Migatronic

Migatronic AUTOMIG Manuale utente

Migatronic

Migatronic RALLY MIG 161i Manuale utente

Migatronic

Migatronic AUTOMIG 200 XE Manuale utente

Migatronic

Migatronic Automig 230 Manuale utente

Migatronic

Migatronic RALLY MIG 161i Manuale utente

Migatronic

Migatronic AUTOMIG Manuale utente

Migatronic

Migatronic ZETA 60 Manuale utente

Migatronic

Migatronic IWF Manuale utente

Migatronic

Migatronic SIGMA ONE 300 Manuale utente

Migatronic

Migatronic RWF2 Manuale utente

Migatronic

Migatronic FOCUS MIG 300 Manuale utente

Migatronic

Migatronic PILOT 1500 HP Manuale utente

Migatronic

Migatronic TIG Scout 160 HP Manuale utente

Migatronic

Migatronic FOCUS 200 AC/DC PFC Manuale utente

Migatronic

Migatronic MIGALOG Manuale utente

Migatronic

Migatronic PILOT 141 Manuale utente

Migatronic

Migatronic SIGMA ONE 230 Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente