Migatronic ZETA 60 Manuale utente

50113777

QUICKGUIDE

ZETA 60 I100

10A 30A 45A 60A

0 5 10 15 20

0.9

1.0

1.1

1.2

10A 30A 45A 60A 75A 85A 100A

0 5 101520253035

0.9

1.0

1.1

1.2

1.4

1.5

1.6

Expected quality cut

Dividing cut with reduced quality

Zeta 60

Zeta 100

Please regard the table as a guideline for choice of nozzle size/A compared with maximum

plate thickness for cutting in mild steel. In the case of cutting in other materials, the possible

cutting capacity and cutting speed are reduced.

Amperage

setting (A)

Amperage

setting (A)

Nozzle size mm

Plate thickness mm

1Control knob

Control knob for setting the cutting current:

20-60A for Zeta 60, and

20-100A for Zeta 100.

2Cutting voltage

The LED shines for safety reasons when

there is voltage on the cutting torch.

3Overheating

The LED shines if cutting is interrupted due

to overheating of the machine. The machine

will reconnect automatically after a short

cooling period.

4 Mains error

Low voltage.

5 Cutting current

The LED indicates cutting current.

6 Air pressure

The LED shines if the air pressure falls

to below 3 bar. The machine stops

automatically.

7 Torch error

The LED ﬂashes if there is a short circuit in

the torch. The machine stops automatically.

The LED shines if the torch body is assembled

incorrectly. Always turn off the machine

when changing the spare parts. There is a

risk of high voltage and electric chock.

8 Normal cutting

This function should be used in general.

9 ”Grid” cutting

This function should only be used under

special conditions (e.g. cutting in punched

plates or metal grids); Automatic change-

over between pilot arc and cutting arc.

10 Plasma gouging (Zeta 100 only)

This function is for gouging out

material/welds.

11 Air pressure test

Zeta 60: The gas valve will open without

igniting the arc. This function allows check

and adjustment of the air pressure on

the gauge positioned on the back of the

machine. The air pressure should be

min. 3.5bar for cutting.

Zeta 100: An electrical detection of

over/under pressure is present and

therefore the meter in the regulator has

been removed. The air pressure should be

min. 3.5 bar for cutting and 2.5 bar for

gouging.

12 A (Zeta 100 only)

Display of arc voltage or cutting current.

The key pad must be pressed for 3 seconds

and the LED next to the “A” indicator

will be turned off, when the arc voltage

is displayed. Repress = return to cutting

current.

QUICKGUIDE ZETA 60 I100

910 11

Altri manuali per ZETA 60

Questo manuale è adatto per i seguenti modelli

Altri manuali Migatronic Sistema di saldatura

Migatronic

Migatronic DELTA 140 E Manuale utente

Migatronic

Migatronic SIGMA ONE 300 Manuale utente

Migatronic

Migatronic MIG 305x Manuale utente

Migatronic

Migatronic Multimotive 220 Manuale utente

Migatronic

Migatronic MIG 305x C Manuale utente

Migatronic

Migatronic AUTOMIG PULSE Manuale utente

Migatronic

Migatronic SIGMA ONE Manuale utente

Migatronic

Migatronic PILOT 1800 Manuale utente

Migatronic

Migatronic OMEGA3 YARD 300 Manuale utente

Migatronic

Migatronic AUTOMIG Manuale utente

Migatronic

Migatronic CMI 183i Manuale utente

Migatronic

Migatronic PILOT 1800 Manuale utente

Migatronic

Migatronic PILOT 200 AC/DC Manuale utente

Migatronic

Migatronic SIGMA2 SYNERGIC Manuale utente

Migatronic

Migatronic Commander Manuale utente

Migatronic

Migatronic Automig 181 Manuale utente

Migatronic

Migatronic SIGMA SELECT ROBO Manuale utente

Migatronic

Migatronic PILOT 1500 HP Manuale utente

Migatronic

Migatronic FOCUS MIG 300 Manuale utente

Migatronic

Migatronic PI 320 DC Manuale utente

Migatronic

Migatronic SIGMA2 300 Compact Manuale utente

Migatronic

Migatronic RALLY MIG 161i Manuale utente

Migatronic

Migatronic SIGMA ROBO Manuale utente

Migatronic

Migatronic SIGMA ONE 270 Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Hypertherm

Hypertherm powermax1000 Manuale utente