Milesight UC100 Manuale utente
UC100
Quick Start Guide Cloud App
www.milesight-iot.comMilesight IoT Co., Ltd.
All software & files can be downloaded from
https://www.milesight-iot.com/documents-download/
SMART IOT CONTROLLER
1. Packing List 2. Hardware Introduction
3. LED Patterns
1 × Quick Start Guide
1 × UC100 Controller
1 × Terminal Block 1 × Type-C Cable
& Power Adapter
2 × Wall Mounting Kits
Type-C Port 120Ω Terminal
Resistor Switch
Embedded LoRa
Antenna
LED Indicator
DC Power Interface
RS485
Static On
Static On →Slowly Blinks
Static On →Quickly Blinks
Slowly Blinks
Static On
Device Status LED Status
Reboot: hold the reset button inside the device for more
than 3 seconds
Reset to factory default: hold the reset button inside the
device for more than 10 seconds
Fail to acquire data from data interfaces
System is functioning properly
Device upgrade or system error
Loss or damage to the equipment due
If defects or damages are caused by
Limited Warranty Protection
12 months from original purchase date
against all manufacturing defects.
This Warranty does not cover:
to improper maintenance, or failure to
follow operating instructions.
the use of unauthorized parts or by
service from other than our authorized
agent.
Dealer Stamp
Email: [email protected]
Tel:86-592-5085280
BuildingC09,SoftwareParkPhaseIII,Xiamen361024,Fujian,China
Model:
Date of Purchase:
QC:
Serial Number:
Milesight IoT Co., Ltd. www.milesight-iot.com
4. Configuration Guide 6. Warranty
Steps:
Ensure that the RS485 sensor has connected to UC100, connect
the UC100 device to computer via type-C port and open the
ToolBox, select serial port as USB port and type as “General”,
then type the password to log in ToolBox and configure the device.
(Default login password: 123456)
Preparation:
Type-C USB cable
PC (Windows 10 is recommended)
ToolBox Software: it can be downloaded from Milesight
IoT website.
https://www.milesight-iot.com/software-download/
5. Installation
Remove the back cover of the device, fix the wall plugs into the wall
according to drilling position as referred.
Then screw the cover on the mounting positions and install back the
device.
80g双胶纸
UC100
63x63mm
折页版
44.005.000149
V1.0
客 户
编 码
机 型
材 质
尺 寸
工 艺
版 本
Altri manuali per UC100
2
Altri manuali Milesight Controllori
Milesight
Milesight UC300 Manuale utente
Milesight
Milesight UC50 Series Manuale utente
Milesight
Milesight UC51 Series Manuale utente
Milesight
Milesight UC11 Series Manuale utente
Milesight
Milesight UC100 Manuale utente
Milesight
Milesight UC51 Series Manuale utente
Milesight
Milesight UC50 Series Manuale utente
Milesight
Milesight UC300 Manuale utente
Milesight
Milesight WS558 Manuale utente
Milesight
Milesight UC100-868M Manuale utente
