Mitsubishi Electric MELSEC FX2N Manuale utente

MELSEC FX Family

Programmable Logic Controllers

Beginner´s Manual

FX1S,FX1N,

FX2N,FX2NC,

FX3G,FX3GC,FX3GE,

FX3S,

FX3U,FX3UC

MITSUBISHI ELECTRIC

Art. no.: 166388

15082013

Version E

INDUSTRIAL AUTOMATION

MITSUBISHI ELECTRIC

The texts, illustration, diagrams and examples in this manual are provided

for information purposes only. They are intended as aids to help explain the

installation, operation, programming and use of the

programmable logic controllers of the

MELSEC FX1S,FX1N,FX2N,FX2NC,FX3G,FX3GC,FX3GE,

FX3S,FX3U and FX3UC series.

If you have any questions about the installation and operation of any of the

products described in this manual please contact your local sales office or distributor (see back cover).

You can find the latest information and answers to frequently asked questions on our website at

www.mitsubishi-automation.com

MITSUBISHI ELECTRIC EUROPE BV reserves the right to make changes

to this manual or the technical specifications of its products at any time without notice.

Beginner’s Manual for the programmable logic controllers of the

MELSEC FX family FX1S,FX1N,FX2N,FX2NC,FX3G,FX3GC,FX3GE,FX3S,FX3U und FX3UC

Art. no.: 166388

Version Revisions / Additions / Corrections

A 01/2006 pdp-tr First edition

B 01/2007 pdp-dk Addition of chapter 7

Considering of the extended product range for the base units of the FX3U series in chapters 2.3

and 2.4.

C 07/2009 pdp-dk Consideration of the controllers of the FX3G and the FX3UC series

New adapter modules FX3U-4AD-PNK-ADP and FX3U-4AD-PTW-ADP

D — — Version skipped for internal reasons

E 08/2013 pdp-dk Consideration of the FX3GC, FX3GE and the FX3S series controllers

New adapter module FX3U-3A-ADP

New intelligent function module FX3U-4LC

Consideration of the programming software GX Works2 FX

Safety Guidelines

For use by qualified staff only

This manual is only intended for use by properly trained and qualified electrical technicians

who are fully acquainted with the relevant automation technology safety standards. All work

with the hardware described, including system design, installation, configuration, mainten-

ance, service and testing of the equipment, may only be performed by trained electrical techni-

cians with approved qualifications who are fully acquainted with all the applicable automation

technology safety standards and regulations. Any operations or modifications to the hardware

and/or software of our products not specifically described in this manual may only be

performed by authorised Mitsubishi Electric staff.

Proper use of the products

The programmable logic controllers of the FX1S,FX1N,FX2N,FX2NC,FX3G,FX3GC,FX3GE,

FX3S,FX3U and FX3UC series are only intended for the specific applications explicitly

described in this manual. All parameters and settings specified in this manual must be

observed. The products described have all been designed, manufactured, tested and docu-

mented in strict compliance with the relevant safety standards. Unqualified modification of the

hardware or software or failure to observe the warnings on the products and in this manual

may result in serious personal injury and/or damage to property. Only peripherals and expan-

sion equipment specifically recommended and approved by Mitsubishi Electric may be used

with the programmable logic controllers of the FX1S,FX1N,FX2N,FX2NC,FX3G,FX3GC,

FX3GE,FX3S,FX3U and FX3UC series.

All and any other uses or application of the products shall be deemed to be improper.

Relevant safety regulations

All safety and accident prevention regulations relevant to your specific application must be

observed in the system design, installation, configuration, maintenance, servicing and testing

of these products. The regulations listed below are particularly important in this regard. This

list does not claim to be complete, however; you are responsible for being familiar with and

conforming to the regulations applicable to you in your location.

쎲VDE Standards

–VDE 0100

Regulations for the erection of power installations with rated voltages below 1000 V

–VDE 0105

Operation of power installations

–VDE 0113

Electrical installations with electronic equipment

–VDE 0160

Electronic equipment for use in power installations

–VDE 0550/0551

Regulations for transformers

–VDE 0700

Safety of electrical appliances for household use and similar applications

–VDE 0860

Safety regulations for mains-powered electronic appliances and their accessories for

household use and similar applications.

쎲Fire safety regulations

FX Beginners Manual I

Safety Guidelines

쎲Accident prevention regulations

–VBG Nr.4

Electrical systems and equipment

Safety warnings in this manual

In this manual warnings that are relevant for safety are identified as follows:

PDANGER:

Failure to observe the safety warnings identified with this symbol can result in health

and injury hazards for the user.

EWARNING:

Failure to observe the safety warnings identified with this symbol can result in damage

to the equipment or other property.

II MITSUBISHI ELECTRIC

Safety Guidelines

General safety information and precautions

The following safety precautions are intended as a general guideline for using PLC systems

together with other equipment. These precautions must always be observed in the design,

installation and operation of all control systems.

DANGER:

FX Beginners Manual III

Safety Guidelines

쎲

Observe all safety and accident prevention regulations applicable to your spe-

cific application. Always disconnect all power supplies before performing

installation and wiring work or opening any of the assemblies, components and

devices.

쎲

Assemblies, components and devices must always be installed in a shockproof

housing fitted with a proper cover and fuses or circuit breakers.

쎲

Devices with a permanent connection to the mains power supply must be inte-

grated in the building installations with an all-pole disconnection switch and a

suitable fuse.

쎲

Check power cables and lines connected to the equipment regularly for breaks

and insulation damage. If cable damage is found immediately disconnect the

equipment and the cables from the power supply and replace the defective

cabling.

쎲

Before using the equipment for the first time check that the power supply rating

matches that of the local mains power.

쎲

Take appropriate steps to ensure that cable damage or core breaks in the signal

lines cannot cause undefined states in the equipment.

쎲

You are responsible for taking the necessary precautions to ensure that pro-

grams interrupted by brownouts and power failures can be restarted properly

and safely. In particular, you must ensure that dangerous conditions cannot

occur under any circumstances, even for brief periods.

쎲

EMERGENCY OFF facilities conforming to EN 60204/IEC 204 and VDE 0113

must remain fully operative at all times and in all PLC operating modes. The

EMERGENCY OFF facility reset function must be designed so that it cannot

ever cause an uncontrolled or undefined restart.

쎲

You must implement both hardware and software safety precautions to prevent

the possibility of undefined control system states caused by signal line cable or

core breaks.

쎲

When using modules always ensure that all electrical and mechanical specifi-

cations and requirements are observed exactly.

IV MITSUBISHI ELECTRIC

Safety Guidelines

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Mitsubishi Electric Controllori

Mitsubishi Electric

Mitsubishi Electric RD77MS2 Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3G SERIES Manuale del proprietario

Mitsubishi Electric

Mitsubishi Electric MELSEC L series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-YG66 DCA-J Manuale di servizio

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC-Q00U(J)CPU Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J4 series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q173CPU Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale di servizio

Mitsubishi Electric

Mitsubishi Electric AJ65BT-D75P2-S3 Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3U-7DM-HLD Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC-F FX2N-1HC Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC FX2N-232-BD Manuale utente

Mitsubishi Electric

Mitsubishi Electric MR-J5 Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric QD62 Manuale utente

Mitsubishi Electric

Mitsubishi Electric AE-200A Manuale utente

Mitsubishi Electric

Mitsubishi Electric FX3U-2HC Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAR-30MAA Manuale utente

Mitsubishi Electric

Mitsubishi Electric MR-J5-G Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manuale utente

Mitsubishi Electric

Mitsubishi Electric PAC-YT51CRB Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente