Molex 105300 Series Manuale utente

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 1 of 7

Revision: B Revision Date: 10-22-20

CONDUCTOR

BRUSH

STRIP LENGTH

SEAM

CONDUCTOR

CRIMP HEIGHT

CUT-OFF

TAB

BELL MOUTH

BEND UP

TWIST

ROLL

BEND

DOWN

WIRE

INSULATION CRIMP

Application Tooling Specification

FEATURES

A full cycle ratcheting hand tool ensures complete crimps

Ergonomically designed soft handles

Precisely designed crimping profiles with simple contact positioning

Easy handling due to outstanding force ratio

This tool is IPC/WHMA-A-620 Class 2 compliant as indicated and RoHS compliant

Modular crimp head is removable and can be used in the Electric Crimp Machine (Order No.

63816-1500), accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600)

Can also be used in the Battery Powered Tool Order No. 63816-0270 (110 V) or 63816-0280

(220 V), accompanied by Battery Powered Crimp Adapter (Order No. 63816-0600)

SCOPE

Products: Nano-Fit Receptacle Terminals, 20-22 AWG UL1061 Wire and 22 AWG UL1007 Wire.

Terminal

Series No.

Terminal Order No.

Wire Size

♦Insulation Diameter

Strip Length

IPC/WHMA-A-620 (1)

Terminal (2)

AWG

Type

In.

105300

105300-2100

105300-2200

105300-2300

105300-2400

20-22

UL1061

1.30-1.55

.051-.061

1.05-1.40

.041-.055

2.50-3.50

.098-.138

UL1007

1.35-1.55

053-.061

(1) To achieve optimum IPC/WHMA-A-620 Class 2 insulation crimps, use this insulation OD.

(2) Overall insulation OD specification for terminal.

DEFINITION OF TERMS

TYPE 4A

Order Number

63827-5600

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 2 of 7

Revision: B Revision Date: 10-22-20

CRIMP SPECIFICATION

Terminal Series No.

Bell Mouth

Cut-Off Tab Maximum

Conductor Brush

In.

105300

0.25-0.50

.010-.020

0.17

.007

0.25-1.00

.010-.040

Terminal Series No.

Bend Up

Bend Down

Twist

Roll

Seam

Degree

105300

Seam shall not be open

and no wire allowed out of

the crimping area

After crimping, the conductor profiles should measure the following:

Terminal

Series

No.

Wire Size

Conductor Crimp

Insulation Crimp

Pull Force

Minimum

Profile

Height

Width (Ref.)

Height

Width

AWG

Type

In.

Lb.

105300

UL1061

0.85-0.95

.033-.037

1.40-1.50

.055-.059

1.65-1.75

.065-.069

1.80-1.90

.071-.075

57.9

13.0

UL1061

0.75-0.85

.030-.033

1.55-1.65

.061-.065

35.6

8.0

UL1007

0.75-0.85

.030-.033

1.75-1.85

.069-.073

35.6

8.0

▲To achieve IPC/WHMA-A-620 Class 2 Crimps, the following overall wire insulation diameter ranges are recommended:

Profile A: 1.40-1.55mm (.055-.061”)

Profile B: 1.30-1.45mm (.051-.057”)

Profile C: 1.35-1.60mm (.053-.063”)

Tool Qualification Notes

1. Pull force should be measured with no influence from the insulation crimp.

2. The above specifications are guidelines to an optimum crimp.

Notes

1. This tool should only be used for the terminals and wire gauges specified on this sheet.

2. This tool is not adjustable for crimp height. Variations in tools, terminals, wire stranding,

and insulation types may affect crimp height.

3. This tool is intended for standard conductor sizes. It may not give a good insulation crimp

support for all insulation sizes.

4. Molex does not repair hand tools (see warranty above). The replacement parts listed are the

only parts available for repair. If the handles or crimp tooling is damaged or worn, a new

tool must be purchased.

5. Pull force should be used as the final criteria for an acceptable crimp. Pull force is

measured with no influence from the insulation crimp. The insulation should be stripped

long (1/2 in.) so the insulation grips on the terminal do not grip the wire insulation or

the conductor. Refer to Molex Quality Crimping Handbook 63800-0029 for additional

information on crimping and crimp testing.

6. Molex does not certify hand crimp tools.

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 3 of 7

Revision: B Revision Date: 10-22-20

OPERATION

Open the tool by squeezing the handles together. At the end of the closing stroke, the ratchet

mechanism will release the handles, and the hand tool will spring open.

1. With the hand tool in the open position, pivot the terminal

locator open by pulling on the locator knob and lift the wire

stop blade. See Figure 1.

2. Insert the terminal into the correct profile until the terminal

is fully seated and stops. Make sure the wire stop blade is

fully in the up position.

3. Gently pivot the locator closed.

4. Bring down the wire stop blade. Make sure the wire stop

blade is fully seated on the terminal behind the

conductor grip section.

5. Slide the pre-stripped wire into the terminal.

Make sure to aim the wire brush toward the tip

point on the wire stop blade. See Figure 2. Align

the wire so that it is parallel and sitting into the

terminal. Maintain a light and constant pressure

on the wire that is seated in the terminal at all

times. (Do not let go of the wire.) Be sure to hold

the wire and terminal in place until the terminal

is fully crimped. See Figure 3.

6. Close the tool until the ratchet releases. The tool

handles will then spring open.

7. Lift the wire stop blade.

8. Carefully remove the crimped terminal. Pivot the terminal locator slightly outward if

necessary. See Figure 4.

WIRE

INSULATION

PUNCH

TERMINAL

WIRE STOP

BLADE

Figure 3

TERMINAL

SEATED IN

LOCATOR

SWING

LOCATOR OPEN

Figure 1

HAND

TOOL

OPEN

WIRE

STOP

BLADE

PIVOT

LOCATOR

Figure 4

REMOVE

CRIMPED

WIRE

Figure 2

WIRE

TERMINAL

LOCATOR

INSULATION

PUNCH

INSULATION

ANVIL

WIRE STOP

BLADE

CONDUCTOR ANVIL

CONDUCTOR

PUNCH

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 4 of 7

Revision: B Revision Date: 10-22-20

INCORRECT

Figure 6

CORRECT

INCORRECT

M4 BHCS

PIVOT

LOCATOR

Figure 5

Note: The tamper-proof ratchet action will not release the tool until it has been fully closed.

Note: To maintain good brush control and a consistent bell mouth, the crimping instructions must be

followed.

TERMINAL LOCATOR REPLACEMENT

This section describes the procedure for changing locators:

Removal

1. With the tool in the open position, pivot the terminal locator outward.

2. Remove the M4 BHCS. See Figure 5.

Installation

1. Place the locator on the hand tool. Install the M4 BHCS. See Figure 5.

2. Tighten the screw just enough to hold the locator. Make sure the locator can still float freely

with hand pressure.

3. Fully insert the proper terminal into the correct profile slot until the terminal is completely

seated and stops. Then, gently pivot the locator closed.

4. With hand pressure, slowly slide the locator to the correct position. See Figure 6.

5. Gently pivot the locator open without disturbing the location.

6. Hold the locator firmly in place, and slowly tighten the M4 BHCS.

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 5 of 7

Revision: B Revision Date: 10-22-20

MAINTENANCE

It is recommended that each operator of the tool be made aware of and responsible for the following

maintenance steps:

1. Remove dust, moisture and other contaminants with a clean brush or a soft, lint-free cloth.

2. Do not use any abrasive materials that could damage the tool.

3. Make certain all pins, pivot points and bearing surfaces are protected with a thin coat of high-

quality machine oil. Do not oil excessively. The tool was engineered for durability, but like

any other equipment, it needs cleaning and lubrication for a maximum service life of trouble-

free crimping. Light oil (such as 30 weight automotive oil) used at the oil points every 5,000

crimps or 3 months will significantly enhance the tool life.

4. Wipe excess oil from the hand tool, particularly from the crimping area. Oil transferred from

the crimping area onto certain terminations may affect the electrical characteristics of an

application.

5. When the tool is not in use, keep the handles closed to prevent objects from becoming

lodged in the crimping dies, and store the tool in a clean, dry area.

Miscrimps or Jams

Should this tool ever become stuck or jammed in a partially closed position, do not force the

handles open or closed. The tool will open easily by lifting the ratchet release lever. See Figure 10.

Warranty

This tool is for electrical terminal crimping purposes only. This tool is made of the best quality

materials. All vital components are long-life tested. All tools are warranted to be free of

manufacturing defects for a period of 30 days. Should such a defect occur, Molex will repair or

exchange the tool free of charge. This repair or exchange will not be applicable to altered, misused

or damaged tools. This tool is designed for hand use only. Any clamping, fixturing or use of handle

extensions voids this warranty.

CAUTION: Repetitive use of this tool should be avoided.

CAUTIONS

1. Manually powered hand tools are intended for low-volume use or field repair. This tool is

NOT intended for production use. Repetitive use of this tool should be avoided.

2. Insulated rubber handles are not protection against electrical shock.

3. Wear eye protection at all times.

4. Use only the Molex terminals specified for crimping with this tool.

CAUTION: Molex crimp specifications are valid only when used with Molex terminals and

tooling.

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 6 of 7

Revision: B Revision Date: 10-22-20

APPLICATIONS FOR THE MODULAR CRIMP HEAD

WARNING: NEVER operate, service, install or adjust this modular crimp head without proper

instruction and without first reading and understanding the instructions in the proper manual

or specification sheet. See chart below for the correct manual or specification sheet.

WARNING: NEVER install tooling or service this tool while it is plugged into any power

source. Disconnect the power by unplugging, or turn off the actuator from its power source.

CAUTION: Keep fingers away from the crimping area when operating this tool. It may cause

severe injury.

CAUTION: Wear safety glasses when operating or servicing this tool.

The chart below shows all applications for this modular crimp head:

Tool Order No.

Tool Description

Adapter Order No.

Adapter Description

Figure No.

63816-0000

Hand Crimp Frame (Short)

—

63816-0050

Hand Crimp Frame (Long)

—

63816-0270

Battery Power Tool (110 V)

63816-0600

Battery Power Crimp Adapter

63816-0280

Battery Power Tool (220 V)

63816-0600

Battery Power Crimp Adapter

63816-1500

Electric Crimp Machine

63816-0600

Battery Power Crimp Adapter

Applications for the Modular Crimp Head

Hand Crimp Tool

Battery Powered Tool

Electric Crimp Machine

Figure 7

Figure 8

Figure 9

MODULAR

CRIMP

HEAD

LOCKING

PINS

HAND CRIMP

FRAME LONG

OR SHORT

MODULAR

CRIMP

HEAD

BATTERY

POWERED

CRIMP

ADAPTER

LOCKING

PINS

LOCKING

PINS

BATTERY

POWERED

TOOL

ELECTRIC

CRIMP

MACHINE

MODULAR

CRIMP HEAD

BATTERY

POWER CRIMP

ADAPTER

Hand Crimp Tool for Nano-Fit Crimp Terminals

Doc No: ATS-6382756HM Release Date: 04-13-15 UNCONTROLLED COPY Page 7 of 7

Revision: B Revision Date: 10-22-20

RATCHET

RELEASE LEVER

HANDLE

SPRING

CRIMPING

SPRING (2)

LOCATOR

Figure 10

M4 X 12mm

LONG BHCS

M4 LOCKNUT

PARTS LIST

Item

Order Number

Description

Quantity

63827-5670

Modular Crimp Head

63816-0000

Hand Crimp Frame (Short)

63827-5675

Locator

63816-0001

Locking Pin

63600-0525

Handle Spring

63600-0520

Crimping Spring

Application Tooling Support

Phone: (402) 458-TOOL (8665)

E-Mail: [email protected]

Website: www.molex.com/applicationtooling

Molex is a registered trademark of Molex, LLC in the United States of America and may be registered in other countries; all other

trademarks listed herein belong to their respective owners.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali molex Utensili per crimpatura

molex

molex 207129 Series Guida utente

molex

molex 207129 Series Manuale utente

molex

molex 63827-8770 Manuale utente

molex

molex 2002180370 Manuale utente

molex

molex 63823-7970 Manuale utente

molex

molex 63823-4100 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 63819-0900 Manuale utente

molex

molex 207128 Series Manuale utente

molex

molex 4D Guida utente

molex

molex 63816-0200 Manuale utente

molex

molex 63825-5800 Guida utente

molex

molex 207129 Series Manuale utente

molex

molex AT-200 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 63819-1300 Manuale utente

molex

molex Avikrimp 64005-3000 Manuale utente

molex

molex 63811-9370 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 63811-6800 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 200218-2600 Guida utente

molex

molex AT 2200 Manuale utente

molex

molex 63819-7670 Manuale utente

Manuali Utensili per crimpatura popolari di altre marche

Panduit

Panduit CT-1000 Guida per l'amministratore

JST

JST CS 10 Manuale utente

Danfoss

Danfoss ET4200 Manuale utente

Tyco Electronics

Tyco Electronics PRO-CRIMPER III Manuale utente

TE Connectivity

TE Connectivity 2063528-1 Manuale utente

Tyco Electronics

Tyco Electronics 69156-1 Manuale utente

CRH

CRH CRL CBLHCT1 Manuale utente

Emerson

Emerson Klauke ES 105CFM Manuale utente

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Manuale di istruzioni

Danfoss

Danfoss ET4350 Manuale utente

Milwaukee

Milwaukee M18 Manuale utente

HOGERT

HOGERT HT1P169 Manuale utente

Textron

Textron ESG105L Manuale utente

Tyco Electronics

Tyco Electronics 90035-3 Manuale utente

Emerson

Emerson Klauke ES 20RMCCFB Manuale utente

Continental Refrigerator

Continental Refrigerator PC150HD Manuale utente

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 Manuale utente

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 Manuale utente

molex 105300 Series Manuale utente

Manuali Utensili per crimpatura popolari di altre marche