Monoprice PID 11752 Manuale utente
PID 11752
3G Digital SDI 8X1 Switch with Reclock function
User’s Manual
Content
1 INTRODUCTION………………….…………………………1
2 SPECIFICATION…………..……..…………………..……..1
3 PACKAGE CONTENT……….……………………………..2
4 PANEL DESCRIPTION………………….………….………2
5 CONNECTION AND OPERATION…………..……………3
SDI8X1SwitcherwithReclock
SDI 8x1 Switcher with Reclock
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read the following instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
1 INTRODUCTION
1.1 Product Description
This is an 8X1switcher, any eight of the SD-SDI, HD-SDI or 3G-SDI signals are
switchable before transfer to the output.
The input signals can be switched by the button. While with RS232 interface,
you can also switch the signals via computer system.
This product is also with Reclock, which provide you with multistage cascade
function. Besides, the memory function makes it possible to return the last
state after restarting or reconnecting.
1.2 Features
This product is specially designed with equalizer IC in its inputs and drive IC in
its output. All of the inputs and output support long coaxial cable.
Support multiple video resolution˖
• SD 480i, 525i and 625i
• HD 720p @ 24/25/30/50/60
• HD 1080i @50/60
• HD 1080p @24/25/30
• 3G 1080p @ 50/60
Support multiple color space˖
• RGB or YCbCr 4:4:4 sampled
• YCbCr 4:2:2 or 4:2:0 sampled
Support wide range of data rates˖270Mbps2.97Gbps.
Support multiple deep color˖8bitǃ10bitǃ12bit.
2 SPECIFICATION
Signal Input/ Output
Input Connector 8xSDI BNC Male
SDI8X1SwitcherwithReclock
1
Output Connector 1xSDI BNC Male
Support line length (Cable is
RG59 )
3G(1080P 60HZ) Mode Up to 80M
HD(720P 60HZ)Mode Up to 130M
SD(480i)Mode Up to 220M
Mechanical
Size(L-W-H) 257×133×26MM
Weight (Net) 863G
Warranty
Limited Warranty 1 Year
Environmental
Operating Temperature 0 ćto +70ć
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature -10ćto +80ć
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
External Power Supply 5V DC@ 2A
Power consumption (Max) 6W
Regulatory Approvals
Converter Unit FCC,CE,UL
Power Supply UL,CE,FCC
Accessories Adapter
User Manual English version
Note: Specifications are subject to change without notice.
3 PACKAGE CONTENT
Before using this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
z1XMain unit
z1XPower adapter 5V@2A
z1XUser's Manual
4. PANEL DESCRIPTION
SDI8X1SwitcherwithReclock
2
Power in, DC 5V/2A adapter available;
RS232 interface, connect to computer system;
Eight SDI inputs, connect to SDI sources, such as SDI Camera;
One SDI output, connect to SDI monitor or other SDI Device.
5 CONNECTION AND OPERATION
5.1 Connection and Operation
(1) Connect the product to appropriate power;
(2) Connect SDI signal to the “SDI in” through 75ȍcoaxial cable with
high-quality˄RG59 cable or equivalent as well˅;
(3) Connect the unit to the next SDI monitor or other SDI devises through the
75ȍcoaxial cable;
(4) Operate the SDI signal to start the show;
Now enjoy your show!
5.2 Functional Operation-RS232
Connect the PC’s RS232 interface to the RS232 on the back of the main
unit; user can select the input source by entering the command through the
“DOS” or "Hyper terminal" on the PC.
Under the “DOS” operating system:
1, You need to check the computer serial port number, such as the COMx.
2, Input “MODE COMx:9600,N,8 ,1”, + Enter.
3, Input “TYPE CON>COMxāˈ+ Enter.
4, Input the “Input port No” of the switcher as the serial No of DOS system,
such as Ā1āǃĀ2āǃĀ3āǃĀ4āǃĀ5āǃĀ6āǃĀ7āǃĀ8ā+
Enter.
SDI8X1SwitcherwithReclock
3
5, Select the corresponding serial number which need to start, then you
can realize the switching function.
Under the “Hyper terminal” operating system:
1, Start the “hyper terminal” software. (MenuėProcedureėCommunication
ėhyper terminal, then press Enter)
2, Input the name as your preference New Connection show interface, +
Enter.
3, Select the correct serial port number, + Enter.
4, BPS set to 9600, DFC select “no”. + Enter
5, Input the “Input port No” of the switcher as the serial No of DOS system,
such as Ā1āǃĀ2āǃĀ3āǃĀ4āǃĀ5āǃĀ6āǃĀ7āǃĀ8ā+
Enter.
6, Select the corresponding serial number which need to start, then you
can realize the switching function. (Hyper terminal is the software comes with
the computer system, if no, you can download it through the internet.)
5.3 Connection Diagram
Indice
Altri manuali Monoprice Interruttore
Monoprice
Monoprice Blackbird 43879 Manuale utente
Monoprice
Monoprice 38161 Manuale utente
Monoprice
Monoprice Blackbird 36633 Manuale utente
Monoprice
Monoprice Blackbird 21614 Manuale utente
Monoprice
Monoprice HDX-501 Manuale utente
Monoprice
Monoprice HRM-2214F Manuale utente
Monoprice
Monoprice 36652 Manuale utente
Monoprice
Monoprice Blackbird 31057 Manuale utente
Monoprice
Monoprice MD-415ARC Manuale utente
Monoprice
Monoprice 8462 Manuale utente
Monoprice
Monoprice PID 10530 Manuale utente
Monoprice
Monoprice 36651 Manuale utente
Monoprice
Monoprice 30919 Manuale utente
Monoprice
Monoprice 38298 Manuale utente
Monoprice
Monoprice HD-411E3 Manuale utente
Monoprice
Monoprice 36653 Manuale utente
Monoprice
Monoprice 611680 Manuale utente
Monoprice
Monoprice HDX-401E Manuale utente
Monoprice
Monoprice HDX-301 Manuale utente
Monoprice
Monoprice 38296 Manuale utente
