Monster SUPERTHIN MEDIUM PIVOT MOUNT Guida
SUPERTHIN™MEDIUM PIVOT MOUNT
SECURE, EASY TO INSTALL, LOWPROFILE MOUNTWITH ADJUSTABLE PIVOT
INSTALLATION MANUAL
AND WARRANTY
80 lbs.
(36.28 kg)
27"
-46"
(68-116cm)
2
This SuperThin mount is designed to mount 27"– 46"
(68 – 116 cm) flatscreen televisions to vertical walls.
Maximum weight capacity is 80 lbs. (36.28 kg).
SUPERTHIN™MEDIUM PIVOT MOUNT
Before installing, carefully review the instructions
to ensure that no parts are missing or defective.
Improper installation can cause damage or serious
injury. Do not use this product for any purpose not
explicitly specified by Monster or the manufacturer.
Neither Monster nor the manufacturer can be liable
for damage or injury caused by incorrect assembly,
incorrect mounting or incorrect use.
All hardware is supplied for the following wall
conditions: Wood stud, brick, solid concrete and
concrete block.
Note: The supplied hardware is not for steel stud
walls. If you are uncertain about the nature of your
wall construction, consult an installation contractor.
SAFETY WARNING
If you don’t understand these directions, or are
unsure of how to install this product installation,
please call a qualified contractor or contact Monster
Cable Products, Inc.
If you bought the Product in the United States, Latin
America (Mexico 011-882-800-8989), or Asia Pacific
(China 400-820-8973), contact Monster, LLC (455
Valley Drive, Brisbane, CA 94005) at 1 877 800-8989.
If you bought the Product anywhere else, contact
Monster Technology International Ltd., Ballymaley
Business Park, Ennis, Co. Clare, Ireland. You can write
or use one of the following telephone numbers:
Canada 866-348-4171, Ireland 353 65 68 69 354,
Austria 0800296482, Belgium 0800-79201, Czech
Republic 800-142471, Denmark 8088-2128, Finland
800-112768, France 0800-918201, Germany
0800-1819388, Greece 00800-353-12008, Italy
800-871-479, Netherlands 0800-0228919, Norway
800-10906, Russia 810-800-20051353, Spain
900-982-909, Sweden 020-792650, Switzerland
0800834659, United Kingdom 0800-0569520.
Important Notice
Monster intends to make this manual accurate and
complete, however, Monster makes no claim that
the information contained herein covers all details,
conditions or variations, nor does it provide for
every possible contingency in connection with the
installation or use of this product. The information
contained in this document is subject to change
without notice or obligation of any kind. Monster
makes no representation of warranty, expressed
or implied, regarding the information contained
herein. Monster assumes no responsibility for
accuracy, completeness or sufficiency of the
information contained in this document.
3
8.6" (21.8cm) 8.6" (21.8cm)
1.60" (4.1cm)
10.2" (25.9cm)
7.87" to 15.75" (20cm to 40cm)
16.54" (42.3cm)
16.73" (42.5cm)
8.37" (21.25cm) 8.58" (21.8cm)
4.92" to 15.75" (12.5cm to 40cm)
18.94" (48.1cm)
13.98" (35.5cm)
Specifications and Notes
VESA™200×200 / 300×300 / 400×200 / 400×400 / Compliant
Monster is constantly striving to improve its products. Specifications are subject to change without notice.
4
Package Contents
If any parts are missing, please call the appropriate Monster number for your location.
See page 2for phone numbers.
1 Wall Mounting Plate
with Pivot Arm
2 Allen Keys
4 Rectangular
Washers
1 Cardboard
Installation Template 4 Concrete Anchors 4 Lag Bolts 4 Round Washers
1 Upper
TV Mounting Bracket
1 Hex Wrench
Screws
4 each M4×10 / M4×15 / M4×25
4 each M5×10 / M5×15 / M5×25
4 each M6×10 / M6×15 / M6×25
4 each M8×10 / M8×15 / M8×25
1 Lower
TV Mounting Bracket
1 Electronic
Studfinder
1 Bubble Level
5
WARNINGS
A WARNING alerts you to the possibility of serious
injury or death if you do not follow the instructions.
(1) DO NOT install on a sloping surface. Install
exclusively on a vertical surface.
(2) DO NOT mount to cabinetry made of
particleboard.
(3) DO NOT install in a room with excessively high
temperatures or high humidity. Install at least 3 ft.
from all water sources. Refer to TV manufacturer’s
manual for specific information regarding
temperature and humidity.
(4) DO NOT install near an air conditioner.
(5) DO NOT install in a location where there is
excessive dust, smoke or moisture. These sources
can create a fire.
(6) NEVER apply unnecessary stress or load on the
installed unit. Never hang on the unit.
(7) DO NOT install unit alone. Safe installation
requires at least two people.
(8) DO NOT route your flatscreen TV’s power cord
in wall. Check local building/electrical codes for
more information.
(9) DO NOT over tighten screws or bolts. This can
damage the wall plate or the surface of your wall.
Thread screws or bolts carefully by hand before
tightening. If you feel any resistance, remove the
screw or bolt immediately.
(10) DO NOT release the wall plate until you are
absolutely sure it is secured to the wall.
Important!
Read Before Installing
CAUTIONS
A CAUTION alerts you the possibility of damage or
destruction of equipment if you do not follow the
corresponding instruction.
(1) To prevent eye fatigue, do not install where there
is direct sunlight or excessive light.
(2) When carrying out maintenance, disconnect the
TV’s power supply to avoid electrical shock.
(3) If planning to route AV cable in wall, only use
cable that is approved for this use.
Masonry Mounting
While masonry materials (bolts and concrete
anchors) are included, masonry mounting requires
specialized knowledge, skills and tools. Monster
highly recommends that you seek the assistance of
a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
6
Pre-Installation Checklist
For wood stud mounting, your mounting
location must have at least one wall stud.
Your view of the mounting location must be
free of glare or other obstructions.
Your mounting location must be near an AC
power outlet. Ideally the outlet should be
behind your TV. This allows you to conceal your
display’s power cord.
Your mounting location must be at least 3 ft.
from any source of heat or water.
Your mounting location must allow enough
room for your TV to swing completely to the
left and right on the pivot mount. Refer to
Specifications on page 3.
TIP: To hide your TV’s power cord and AV cables,
install a Monster FlatScreen™CleanView™Cable
Manager.
IMPORTANT NOTE
Due to the design of the Monster FlatScreen
Medium Pivot Mount, the center of your TV will
only be aligned on the center of the wall plate
when the mount is fully extended; otherwise
it will be offset to the right or left up to 8.6"
(218mm) when flat to the wall.
Required Tools
Wall Stud Mounting
Level (included)
Electronic studfinder (included)
Electric hand drill
³∕₁₆" drill bit
Phillips screwdriver
Wrench or socket set
Masking tape
Masonry Mounting
(brick, concrete, concrete blocks)
Above tools
Replace ³∕₁₆" drill bit with ½" masonry drill bit
Hammer
7
1Locate a wall stud at your desired mounting
location.
2Position the supplied cardboard template
over the stud and tape template to wall with
masking tape. Make sure the template is level by
using the supplied bubble level.
Wood Stud Mounting
An electronic studfinder is included. Remove
plastic tab on the back of the studfinder to activate
battery. To locate a wall stud, hold the studfinder
against the wall where you want to mount your TV.
Push down the button on the studfinder and slide
the studfinder along the wall until the indicator
light goes on.
Installing the Wall Mounting Plate
Remove all pieces of the wall mounting system to
ensure you have all necessary parts.
8
Wood Stud Mounting (cont’d)
5Position the wall mounting plate over the holes
drilled in the wall studs.
4Remove plastic covers on wall mounting plate.
3With your electric drill and ³∕₁₆" bit, pre-drill
a 3" deep hole where indicated on template.
After drilling holes, remove template from wall.
9
Wood Stud Mounting (cont’d)
7With the help of another person, attach the
wall plate to the wall using the lag bolts and
round washers as shown to the right. Tighten each
bolt with your wrench. Turn clockwise until secure.
8Replace plastic covers on wall mounting plate.
Continue to page 13 to continue your installation.
DO NOT over tighten bolts. This can
damage the wall plate or the surface
of your wall.
DO NOT release the wall plate until
you are absolutely sure it is secured
to the wall.
6Make sure the wall plate is level by using
the supplied bubble level. Place the provided
level on the wall plate and confirm that the wall
plate is vertically straight. Hold the plate firmly
in place.
10
Masonry Mounting
Masonry mounting requires specialized knowledge,
skills and tools. Monster highly recommends that
you seek the help of a professional installer when
mounting to masonry.
1Position the supplied cardboard template in
the desired location and tape template to wall
with masking tape. Make sure the template is level
by using the supplied bubble level.
2With your electric drill and ½" masonry bit,
pre-drill a 3" deep hole where indicated by
template. Be careful not to drill into a mortar joint.
After drilling holes, remove template from wall.
DO NOT drill holes in masonry
mortar joints.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Monster Rack e supporto
Monster
Monster Kicker KB600 Guida rapida
Monster
Monster SUPERTHIN LARGE TILT MOUNT Guida
Monster
Monster MTTVMT14-43 Manuale utente
Monster
Monster SUPERTHIN Manuale utente
Monster
Monster Flatscreen Guida
Monster
Monster SmartView 100S Manuale utente
Monster
Monster Flatscreen Manuale tecnico
Monster
Monster MSR ANT DSS Manuale tecnico
Monster
Monster Medium Articulating Mount Manuale tecnico
Monster
Monster FLATSCREEN PERFECTVIEW 400M Manuale tecnico
