NEVER plug Palette+ into a
computer (USB) while Palette+
is powered on. The only time you
need to connect Palette+ with your
computer is to update firmware.
Don’t touch Palette+’s hot tool
when it’s hot. It hurts!
Palette+ is only compatible with
1.75mm filament.
Do not perform any
maintenance on Palette+’s
internal systems while Palette+
is powered on (or risk electrical
shock or injury, and potentially
damage to Palette+).
In the rare instance that you
hear Palette+’s drives skipping
(or any other unusual clicking
noises), do not force filament
into Palette+. Cancel the print,
unload filament, and unplug
Palette+, then remove the top
cover to check for jams or
blockages.
For detailed safety warnings and
instructions, please go to:
http://mm3d.co/support
Critical Warnings
SERIOUSLY, THESE ONES ARE REALLY IMPORTANT
1
2
3
4
5
6
7
To unload filament from Palette+,
select Utilities > Unload Inputs.
If you must unload filament
manually, pull the filament
slowly (or risk electrical damage to
Palette+).
If your printing environment is
staticky, Palette+’s LCD screen can
occasionally go blank or display
random characters due to static
discharge. If this occurs, simply allow
the print to finish. The static only
affects the screen; the print should
be unaffected.
Never place Palette+ on its
screen. Doing so can damage the
screen.
8
3
UNPLUG POWER
SUPPLY BEFORE
CONNECTING USB
