Moshi BTHF205T Manuale utente

BTHF205T

Declaration:

Without written permission from original manufacturer, reproduction, transfer,

distribution or storage of part or all of the contents in this document in any form is

prohibited.

The company reserves rights to make any changes and improvements to the

product described in this document without prior notice.

Notice ：

Please make sure your mobile phone supports Bluetooth profiles and network

operator supports the functions described in this manual, otherwise the relative

functions cannot be realized on this Handsfree device.

Safety

zUse the charger that comes with package.

zCaution, risk of explosion if battery is replaced by an incorrect type.

zCheck the laws and regulations on the use of mobile phones and handsfree

equipment in the areas where you drive. Always give full attention to driving and

pull off the road and park before making or answering a call if driving conditions

require.

zDo not allow children to play with your Bluetooth Handsfree Speaker since it

contains small parts that could become detached and create a choking hazard.

zThis device contains a Li-polymer battery. Please keep it away from fire anytime

(including discarding the device) or the battery may explode.

zThe Handsfree Speaker, especially the embedded battery must be properly

disposed or may be recycled. Contacts your local recycling centers for disposal

methods.

BTHF205T

Certification and Safety Approvals

This product has been tested and found to comply with Bluetooth BQB requirements,

part 15 of FCC rules, R&TTE Directive（99/5/EC）or CE marked requirements.

Warning：Users should not make changes or modify the device in any way. Changes or

modifications without being expressly approved by the party responsible for compliance

could void the user’s authority to operate the device.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could

void the user's authority to operate the equipment.

RF exposure warning

This equipment must be installed and operated in accordance with provided instructions

and the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter. End-users and installers must be

provided with antenna installation instructions and transmitter operating conditions for

satisfying RF exposure compliance.

CE command：

EN 301 489-17 v1.2.1: 2002

ETSI EN 300 328 v1.6.1:2004

IEC 60950-1:2001 / EN 60950-1:2001

BTHF205T

Contents：

1. INTRODUCTION........................................................................................................... 5

1.1 BLUETOOTH TECHNOLOGY ........................................................................................ 5

1.2 BLUETOOTH HANDSFREE SPEAKER ........................................................................... 5

1.3 PRODUCT FEATURES................................................................................................... 5

1.4 PACKAGE CONTENTS.................................................................................................. 6

1.5 OVERVIEW .................................................................................................................. 7

2. USING YOUR HANDSFREE........................................................................................ 8

2.1 BATTERY CHARGING AND USAGE ............................................................................. 8

2.1.1 Battery Charging............................................................................................ 8

2.1.2 Battery Information ....................................................................................... 8

2.2 MOUNTING YOUR HANDSFREE................................................................................... 8

2.3 INITIAL SETUP............................................................................................................. 9

2.4 POST SETUP CONNECTION ISSUES.............................................................................. 9

2.5 MAIN VOICE COMMAND SET TRIGGER OPTIONS –2OPTIONS TO ACCESS.............. 10

2.6 MAIN VOICE COMMANDS &ACTIONS..................................................................... 10

2.7 INCOMING CALLER ID AND HANDSFREE ANSWER/IGNORE.................................... 11

2.8 CANCEL OPERATIONS ............................................................................................... 11

2.9 SAVE FAVORITE NUMBER ON THE HANDSFREE ...................................................... 11

3. QUICK USER GUIDE.................................................................................................. 12

3.1 LED PATTERN........................................................................................................... 12

3.2 QUICK USER GUIDE .................................................................................................. 12

3.2.1 Basic Function............................................................................................. 12

3.2.2 Voice Command.......................................................................................... 13

4. MAINTENANCE .......................................................................................................... 14

BTHF205T

1. Introduction

1.1 Bluetooth Technology

Bluetooth is an internationally standardized technology supporting short distance

wireless communications. Any two Bluetooth-compatible equipments, such as mobile

phone, PDA、PC, headset, mouse, keyboards, printer, etc. can wirelessly communicate

with each other via Bluetooth connection. To ensure worldwide compatibility, Bluetooth

operates on the globally available ISM (Industrial Scientific and Medical) frequency band.

Within 2.4 GHz and 2.48 GHz, Bluetooth transmits data up to either 10 meters (CLASS II

mode) or 100 meters (CLASS I mode) using 79 frequency hopping channels.

Though line-of-sight is not required, Bluetooth connections could be subject to

interferences from obstructions such as walls, human bodies, and other electronic

devices. In addition, due to variations on product implementation, it is likely that

Bluetooth equipments from different manufactures have interoperability issues. In that

case, you may consult with manufactures to check product compatibility.

Note that, there could be some restrictions imposing on using Bluetooth devices in some

countries. Please check with your local authorities.

1.2 Bluetooth Handsfree Speaker

This Bluetooth handsfree speaker is a specially designed product allowing car drivers to

make and receive calls without holding a mobile phone. It provides a clean wireless

audio connection with your Bluetooth mobile phone and PDA.

In addition to vehicle environment applications, this portable equipment, supported by an

internal rechargeable Li-ion battery, can also be used in office environment as normal

handsfree equipment to make/receive/conference phone calls.

1.3 Product Features

zBluetooth v 2.0compliant, interference-tolerable with WLAN devices

zVoice Command technology makes real hands-free operating possible. You may

voice command the device to-------

¾Answer/Ignore call

¾Redial/Call back

¾Enter pair mode

BTHF205T

¾Check connection status; attempt to reconnect to paired device if no

connection

¾Call speed dial up to seven set IDs

¾Call Microsoft Bing 411 Handsfree information service to check call

information (for USA market)

¾Check battery level and responds

¾Start voice recognition on Phone for Name Dial, etc

¾Cancel an operation

zClass II, operating range up to 10 meters

zData rate up to 723 Kbps

zCompatible with most Bluetooth-enabled devices such as cellular phones, PDAs,

and computers

zSupport up to 8 handset pairing info simultaneously

zBest-in-class voice quality ensured by cutting-edge noise suppression and echo

cancellation techniques

zVoice security ensured by using 128-bit encryption

zAudio output up to 115 dB

zBetter portability with internal rechargeable battery

zLow power consumption, up to 7 hours talk time and 460 hours standby time with

the internal battery

zEasy-to-mount with magnetic mounting design and Sun visor clip

zRobust performance, fast connection, accurate and sensible search of devices in

range

zStylish, portable, lightweight, mini-sized, suitable for vehicle and office

environment

1.4 Package Contents

zBTHF205T

zSun-visor Clip

z12/24V Car Charger Set（or Traveling Charger Set，Optional）

zUser Manual

BTHF205T

1.5 Overview

Figure 1 Overview

1. Speaker：Voice/AV music delivery.

2. Red/Blue LED：Indicate device status.

3. Button

：Switch the device on/off.

4. Button

：Answer/end call; Say/Cancel a command

5. Button ╋：Volume up

6. Button ━：Volume down

7. Microphone：Voice pick-up

8. Charging Port ：Connect to the travel (or car) charger to charge the battery

of device

BTHF205T

2. Using Your Handsfree

2.1 Battery Charging and Usage

2.1.1 Battery Charging

This device contains a rechargeable Li-Polymer battery. First-time charging time is about

4 hours. Later-on recharging time is around 2-3 hours. Detailed charging procedures as

follows:

1. Connect the car charger to the cigarette lighter, or plug the USB cable in PC.

2. Referring to Figure 2, plug the connector of the charger to handsfree’s charging

port to start charging.

Figure 2 Battery Charging

2.1.2 Battery Information

Once fully charged, the battery for BTHF205T supports continuous talk time up to 7

hours and standby time about 460 hours.

Note that, over-charging will reduce battery life. If a fully charged battery is left unused, it

will lose power over time. Extreme temperature (either too hot or too cold) will also affect

its ability to charge, capacity, and lifetime.

2.2 Mounting your Handsfree

This Handsfree device can be easily mounted inside the car by using the companion

Sun-Visor Clip to fix the product on the sun-visor over the driver’s seat. As shown in

Figures 3, there are two magnetic tips on the backside of the device. You can attach the

Sun-Visor Clip to them. For better mounting the device, please clip the Sun-Visor Clip to

the sun visor first, and then properly attach the device to the Sun-Visor Clip.

Note that, the microphone of the Handsfree must aim at the sound bearing.

BTHF205T

Magnetic Tip

Sun-Visor Clip

Figure 3 Attach Sun-visor Clip to Magnetic Tips

With great portability and flexibility, this device can also be used outside of car

environment such as in office and/or at home.

2.3 Initial Setup

zHave phone ready to do Bluetooth setup. Refer to Phone User Guide if required to

locate Bluetooth Setup function on phone.

zTurn on Handsfree speaker when phone gets ready. Follow user prompt

instructions to pair to your phone.

zIf you have accidentally cancelled the setup process, the main command “PAIR

MODE” (said after triggering and hearing the “Say A Command prompt) will allow

you to enter pair mode and set up your phone.

2.4 Post Setup Connection issues

zDevice is programmed to automatically attempt connection to your phone

whenever it is turned on. When the connection is timed out, you will hear “no

phone found” or “your phone is connected”. If it is “no phone found”, user needs

to use VR command to try to re-connect again. If it is connected user will hear

“your phone is connected”, if it is not currently connected, user will hear

“searching….”.When the connection processing is complete, user will either hear

“your phone is connected” or “no phone found”.

zTo check connection status, simply use one of the voice command trigger options

below, and then say “AM I CONNECTED?” The device should respond with

current connection status. If no connection exists the device will automatically

search for a previously paired phone and attempt connection.

zIf phone fails to connect, ensure that Bluetooth is enabled on the phone and re-

attempt.

BTHF205T

2.5 Main Voice Command Set Trigger options – 2 options to access

zTruly Handsfree option - Say “HELLO BTHF205T”, if no response say again.

Loud radio play or passengers talking may interfere with the ability to use the

Truly Handsfree Voice trigger.

zPress the Main Front Button on Handsfree Speaker

zEither approach will trigger the “SAY A COMMAND” prompt, which indicates the

device is listening for a operational voice command detailed in the chart blow.

2.6 Main Voice Commands & Actions

The most important command to remember:

“WHAT CAN I SAY?” - BTHF 205T will remind you the available commands it is

listening for.

Voice Command Action

“What Can I Say” Provides voice reminder of active

commands headset will understand

“Am I Connected” Provides voice response of connection

status; attempts to reconnect (to Pair) if

no connection

“Redial” Calls the Last Outgoing Call

“Call Back” Calls the Last Incoming Call

“Call Favorite <#>” (for #s 1-5) Calls Speed Dial 1-5 on phone

“Call Home” Calls Speed Dial 6

“Call Office” Calls Speed Dial 7

“Call Voicemail” Calls Speed Dial 1

“Call Information” Calls Microsoft Bing 411 Handsfree

information service

“Check Battery” Checks Battery Level and responds

“Pair Mode” Enter Pair Mode

“Phone Command” Starts voice recognition on Phone for

Name Dial, etc

“Settings Menu”

Starts configuration menu • Turning

Caller ID prompt on/off • Disable “Say

Your Command” prompt • Turning entire

Voice Interface off to return to button

only operation • Sets “Save Favorite”

prompt • Voice Control Help

“Cancel” Cancels the voice command process

and returns to standby mode

Indice

Altri manuali Moshi Altoparlanti

Moshi

Moshi spatia Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente