Motion Domotica Box RS485 Manuale utente
pair unpair
scene
MANUAL CM-19
MOTION Domotica Box RS485
English
pair unpair
scene
Discover your MOTION domotica box RS485
CM-19 is a domotica box that can be used for the seamless integration of motorized blinds
with home and building automation networks and systems. Any USB-harger can be used to
power the domotica box.
For the latest information and updated manuals, visit rtube.nl/cm-19
Scenes Max.
blinds
Frequency Range
radio
Range
RS485
Power
supply
Length Width Height Certificates
15 unlimited 433 MHz 30 m with
1 concrete
wall 30 m Micro
USB 5V DC 79 mm 79 mm 25 mm
Inside the box you will find
CM-19 MOTION-domotica box Micro-USB cable 75cm
pair unpair
+
play
-
scene
pair unpair
+
play
-
scene
pair unpair
+
play
-
scene
Port #2 Dry contact box (RJ9)
Port #1 RS485 (RJ9)Micro-USB 5VDC
Scene
indicator
FCC Manual I FCC ID: ZY4CM19
Regulatory Information
1 FCC Information for User
This product does not contain any user-
serviceable components and is to be used with
approved antennas only. Any product changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference
received, including interference that may cause
undesired operation.
3 FCC Radio Frequency Interference
Statement
This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses and can radiate radio-
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference, in which case the
user will be required to correct the interference at
their own expense.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the distance separating the equipment
and receiver
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help
Safety
WARNING: Important safety instructions. Follow all
instructions, since incorrect installation can lead to
severe injury.
Do not let children play with the blind and/or
remote control.
Take care that the blind can move freely and is
not blocked by any objects.
Do not paint the device.
Keep the device dry.
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards.
Cleaning
Follow these general rules when cleaning the
outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol, or
abrasives.
Service & Support
Do not perform repairs yourself.
Do not attempt to open the device or disassemble
it. You run the risk of electric shock and voiding
the limited warranty. No user-serviceable parts
are inside.
Warranty Service
First follow the advice in this manual. If the product
appears to be damaged or does not function
properly, go to your local dealer for instructions on
how to obtain warranty service.
1
1. SET THE BLIND
Set the blind Set the blind(s) at the desired position for your scene.
The blind needs to have end positions. See the manual of your
motor how to program your blind.
pair unpair
+
play
-
scene
2
2.1
2.2
2.3
2. PAIR A SCENE
Pair a scene
To remove the blind from a (stop)scene press the unpair button while the motor is in program mode.
To program a stop scene simultaneously hold the pair + unpair buttons the screen will display a
S indicating that a stop scene has been saved.
To save the position of the blind you have to pair your blind
to a scene on your domotica box. Any scene from 1-15 can be
used to save the position of the blind.
Shortly press the program button on the motor. (Tip : Use channel select on your remote)
The blind will start stepping, indicating the program mode has been activated.
The blind remains stepping until the program mode is de-activated.
Select a desired scene for the blind by pressing the scene + / - button on the domotica box until the
desired scene has been found. ( Scenes 1-15 can be used for saving scenes.)
Press the pair button on the domotica box to save the position of the blind.
pair unpair
+
play
-
scene
pair unpair
+
play
-
scene
3.1
3
3. PLAY A SCENE
Play a scene When the play button is pressed while the blinds are moving,
the play button acts as a stop button.
Play all scenes on the desired location of the domotica box to make sure the range of
the domotica box is sufficient. If the range is not optimal, you can use a power bank to
search for the best location.
Select a desired scene by pressing the scene + / - button on the domotica box until the
desired scene has been found. Press the play button to activate the scene.
4
4. SCENE LIST
Scene list After all scenes have been programmed you can fill in the
name of scenario and give a short description of what the
scenario will activate.
Scenario Scenario Name Example description
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7
Scene 8
Scene 9
Scene 10
Scene 11
Scene 12
Scene 13
Scene 14
Scene 15
play
Building
automation
RS485
RS485+ (A / RX/TX+)
RS485- (B / RX/TX-)
1234
1: -
2: -
3: RS485 -
4: RS485 +
5
5. CONNECT CM-19 TO BUILDING AUTOMATION
Connect CM-19 to building automation
Use a RJ9 Data cable to connect the domotica box to your building automation system. When your
building automation system only has RS232 ports use a converter to RS485. Always refer to the building
automation system pinout diagram for the correct wiring.
The Domotica box has the following UART Parameters :
Protocol: USART
Baud Rate: 9.6 kps Parity Bits: None
Data Bit: 8 bit Stop Bit: 1 bit
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Motion Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
