Motorola Symbol CS3070 Manuale utente
Symbol CS3070
Quick Reference Guide
2 Symbol CS3070
© 2010 by Motorola, Inc. All rights reserved.
No part of this publication may be reproduced or used in any
form, or by any electrical or mechanical means, without
permission in writing from Motorola. This includes electronic or
mechanical means, such as photocopying, recording, or
information storage and retrieval systems. The material in this
manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis.
Motorola grants to the user a non-transferable and non-exclusive
license to use each software or firmware program delivered
hereunder (licensed program). Except as noted below, such
license may not be assigned, sublicensed, or otherwise
transferred by the user without prior written consent of Motorola.
No right to copy a licensed program in whole or in part is granted,
except as permitted under copyright law. The user shall not
modify, merge, or incorporate any form or portion of a licensed
program with other program material, create a derivative work
from a licensed program, or use a licensed program in a network
without written permission from Motorola. The user agrees to
maintain Motorola’s copyright notice on the licensed programs
delivered hereunder, and to include the same on any authorized
copies it makes, in whole or in part. The user agrees not to
decompile, disassemble, decode, or reverse engineer any
licensed program delivered to the user or any portion thereof.
Motorola reserves the right to make changes to any software or
product to improve reliability, function, or design.
Motorola does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.
No license is granted, either expressly or by implication, estoppel,
or otherwise under any Motorola, Inc., intellectual property rights.
An implied license only exists for equipment, circuits, and
subsystems contained in Motorola products.
MOTOROLA and the Stylized M Logo and Symbol and the
Symbol logo are registered in the US Patent & Trademark Office.
Bluetooth is a registered trademark of Bluetooth SIG. Microsoft,
Windows and ActiveSync are either registered trademarks or
trademarks of Microsoft Corporation. All other product or service
names are the property of their respective owners.
Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742-1300
http://www.motorola.com/enterprisemobility
Warranty
For the complete Motorola hardware product warranty statement,
go to: http://www.motorola.com/enterprisemobility/warranty.
Quick Reference Guide 3
Introduction
This document provides basic instructions for
setting up, programming, and using the
CS3000 series scanners. The scanner is
available in the following configurations:
• CS3000 - USB (batch), 0.5 GB Flash
• CS3070 - USB (batch) and Bluetooth,
0.5 GB Flash
Each scanner includes a USB host cable. A
charging cradle is also available for mounting,
charging, and host connection.
Charging
To charge the CS3000 series scanner, connect
it to a host PC via the USB host cable or
charging cradle. No power supply is
necessary. Charge time is approximately three
hours for a fully discharged battery.
Charging via USB Host Cable
1. Remove the protective cover from the
scanner.
2. Insert the mini-USB connector on the host
cable in the interface port on the scanner.
4 Symbol CS3070
3. Connect the other end of the host cable to
a USB port on the host PC.
Charging via Charging Cradle
1. Insert the cradle’s USB connector into a
USB port on the host PC.
2. Remove the protective cover from the
scanner.
3. Place the scanner in the cradle, ensuring
the mini-USB connector in the cradle
inserts into the interface port on the
scanner.
Illustration to come
Illustration to come
Quick Reference Guide 5
Connecting to a Host
Batch Connection
See Charging on page 3 for instructions on
connecting the scanner to a host PC via USB.
Bluetooth Connection
Pairing
For RF-enabled scanners, to pair to a
Bluetooth-enabled host:
1. Press the scan button (+) to wake the
scanner.
2. Press and hold the Bluetooth button (round
button with Motorola logo) for five seconds.
The scanner beeps and the Bluetooth
button starts blinking quickly to indicate
that the scanner is discoverable by the
host.
3. On the host PC, launch the third party
Bluetooth pairing application and place the
application into discover Bluetooth device
mode.
Note To enter batch scanning mode, the
scanner cannot be paired to a
Bluetooth host (applies to CS3070
model only).
Note If the host does not support
Bluetooth communication, a
third-party Bluetooth adapter is
required.
6 Symbol CS3070
4. Select the CS3070 from the discovered
device list. The Bluetooth application may
prompt you to scan a passkey it generated,
or for you to create and then scan a pin.
5. Scan Numeric Bar Codes on page 8
corresponding to the passkey, then scan
Enter on page 9.
The Bluetooth button blinks slowly to indicate
that the scanner paired with the host.
Unpairing
To unpair the scanner and host, press the
Bluetooth button. The Bluetooth button stops
blinking.
Note Bluetooth pairing suspends
temporarily while charging via a
USB cable. Disconnecting the cable
re-establishes the Bluetooth pairing.
Note To enter batch scanning mode, the
scanner cannot be paired to a
Bluetooth host (applies to CS3070
model only).
Quick Reference Guide 7
Bluetooth Communication Options
To set up the scanner for communication with
a host using standard Bluetooth profiles, scan
one of the following bar codes.
•Serial Port Profile (Slave) - The scanner
connects to the host via Bluetooth and
emulates a serial connection. The
scanner accepts an incoming connection
requested from a remote device and is the
slave. Scan Serial Port Profile (Slave) and
wait for the incoming connection.
•Bluetooth Keyboard Emulation (HID
Slave) - The scanner connects to the host
via Bluetooth and emulates a keyboard.
The scanner accepts an incoming
connection requested from a remote
device and is the slave. Scan Bluetooth
Keyboard Emulation (HID Slave) and wait
for the incoming connection.
Serial Port Profile (Slave)
Bluetooth Keyboard Emulation (HID Slave)
8 Symbol CS3070
Numeric Bar Codes
0
1
2
3
4
5
Quick Reference Guide 9
6
7
8
9
Enter
10 Symbol CS3070
Scanning
To scan bar codes:
1. Aim the scanner at the bar code.
2. Press the scan (+) button.
3. Ensure the scan line crosses every bar and
space of the symbol.
The scanner beeps and the LED turns green
to indicate a successful decode. See User
Indications for beeper and LED definitions.
Illustration to come
012345
RIGHT
WRONG
012345
Altri manuali per Symbol CS3070
1
Indice
Altri manuali Motorola Lettore di codici a barre
Motorola
Motorola Symbol LS1203 Manuale utente
Motorola
Motorola SYMBOL DS3578 Manuale di installazione e funzionamento
Motorola
Motorola DS4800 Series Manuale di installazione e funzionamento
Motorola
Motorola Symbol DS6878 Manuale utente
Motorola
Motorola Symbol DS6608 Manuale di installazione e funzionamento
Motorola
Motorola Symbol LS2208 Manuale utente
Motorola
Motorola Symbol LS2208 Manuale utente
Motorola
Motorola SYMBOL DS3578 Manuale di installazione e funzionamento
Motorola
Motorola SYMBOL LS7708 Manuale di installazione e funzionamento
Motorola
Motorola MK1250-0N0DAKBNTWR - Symbol Micro Kiosk MK... Manuale di installazione e funzionamento
Motorola
Motorola RS409 Manuale utente
Motorola
Motorola LI2208 Manuale utente
Motorola
Motorola Symbol CS3000 Series Manuale utente
Motorola
Motorola SYMBOL MT2000 Series Manuale utente
Motorola
Motorola SYMBOL LS3478 Manuale utente
Motorola
Motorola DS9808 - Symbol - Wired Handheld Barcode... Manuale di installazione e funzionamento
Motorola
Motorola RS507 Series Manuale utente
Motorola
Motorola SYMBOL LS9203 Manuale utente
Motorola
Motorola MK2200-0N0SCKBWT0R - Micro Kiosk MK2200 Manuale di installazione e funzionamento
Motorola
Motorola Symbol LS3578-ER Istruzioni operative
