Datalogic DS2x00N-DS4800 Series Guida

DS2X00N-DS4800 SCANNER FAMILY

SETUP PROCEDURE USING PROGRAMMING BARCODES

1 ID-NET™ NETWORK SETUP USING PROGRAMMING

BARCODES

For any DS2x00N-DS4800 Family scanner, programming barcodes can be used to setup the

ID-NET™ built-in high-speed interface dedicated for high-speed reader interconnection.

ID-NET™ is in addition to the Main and Auxiliary serial interfaces.

Following topologies are available:

ID-NET™ M/S Synchronized: Single station – multiple scanners

The ID-NET™ interface allows local connection of multiple scanners that are reading on

different sides of the same target. All scanners share a single presence sensor and

activate/deactivate simultaneously.

At the end of each reading phase a single data message is transmitted to the host.

Thanks to ID-NET™, data communication among scanners is highly efficient so that an

immediate result will be available.

Main Serial Interface (RS232 or RS485)

External Trigger (for On-Line Mode)

ID-NET™ (up to 16 devices - practical limit)

Host

Master

Slave#1 Slave#n

Power

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata: Multiple stations – single scanner

The ID-NET™ interface allows connection of scanners that are reading objects placed on

independent conveyors. All scanners are typically located far away from each other and they

use a dedicated presence sensor.

At the end of each reading phase, every scanner transmits its own data message to the host.

Thanks to ID-NET™, data collection among readers is accomplished at a high speed without

the need of an external multiplexing device. This leads to an overall cost reduction and to

simplified system wiring.

Terminal

Main Serial Interface (RS232 or RS485)

Auxiliary Serial Interface (Local Echo) (RS232)

External Trigger (for On-Line Mode)

ID-NET™ (up to 32 devices, max network extension of 1000 m)

Host

Master Slave#1 Slave#n

Power

Setup Procedure Using Programming Barcodes

1. Press and hold the X-PRESS™ button to enter the “AutoLearn Mode”. Once button is

pressed, the LED cycle appears as follows:

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS



Just pressed.



After 2 seconds.



After 4 seconds.

Release the button to

enter the AutoLearn

Mode.

The laser beam turns ON

and the yellow LEARN

LED blinks: the

AutoLearn Mode is

working.

2. Now, put the barcode related to the planned role and address in front of the scanner.

The picture below shows, as example, the scanner configuration as “Slave 1” 1:

3. Once the scanner has successfully read the code, the LEDs stay on steady for 2

seconds:

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

Successful reading.

1the barcodes shown are examples, only. Use the barcodes in the Network Layout Barcodes paragraph for the

actual programming.

Slave 1

Setup Procedure Using Programming Barcodes

4. The scanner is programmed and the AutoLearn Mode ends. The green “ready” LED

is on.

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

Programming done.

5. Repeat steps 1..3 above to configure all the slaves and master. The maximum

number of scanners is 32, including the master.

6. Connect the master scanner to a PC by means of the Genius™ configuration software.

Master

Slave 1

Slave n

Setup Procedure Using Programming Barcodes

7. Start the Genius™ Express Network Setup procedure. Refer to the Help On Line

document for details.

NOTE

Any network role can also be programmed using Genius™. Refer to the

Help On Line documentation for further details.

Setup Procedure Using Programming Barcodes

NETWORK LAYOUT BARCODES

ID-NET™ M/S Synchronized

Ì$+SYN00$-dÎ

Master

Ì$+SYN01$-kÎ

Slave 1

Ì$+SYN02$-rÎ

Slave 2

Ì$+SYN03$-yÎ

Slave 3

Ì$+SYN04$-ÄÎ

Slave 4

Ì$+SYN05$-ÂÎ

Slave 5

Ì$+SYN06$-'Î

Slave 6

Ì$+SYN07$-.Î

Slave 7

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Synchronized

Ì$+SYN08$-5Î

Slave 8

Ì$+SYN09$-<Î

Slave 9

Ì$+SYN10$-jÎ

Slave 10

Ì$+SYN11$-qÎ

Slave 11

Ì$+SYN12$-xÎ

Slave 12

Ì$+SYN13$-ÃÎ

Slave 13

Ì$+SYN14$-ÊÎ

Slave 14

Ì$+SYN15$-&Î

Slave 15

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL00$-8Î

Master

Ì$+MUL01$-?Î

Slave 1

Ì$+MUL02$-FÎ

Slave 2

Ì$+MUL03$-MÎ

Slave 3

Ì$+MUL04$-TÎ

Slave 4

Ì$+MUL05$-[Î

Slave 5

Ì$+MUL06$-bÎ

Slave 6

Ì$+MUL07$-iÎ

Slave 7

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL08$-pÎ

Slave 8

Ì$+MUL09$-wÎ

Slave 9

Ì$+MUL10$->Î

Slave 10

Ì$+MUL11$-EÎ

Slave 11

Ì$+MUL12$-LÎ

Slave 12

Ì$+MUL13$-SÎ

Slave 13

Ì$+MUL14$-ZÎ

Slave 14

Ì$+MUL15$-aÎ

Slave 15

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL16$-hÎ

Slave 16

Ì$+MUL17$-oÎ

Slave 17

Ì$+MUL18$-vÎ

Slave 18

Ì$+MUL19$-}Î

Slave 19

Ì$+MUL20$-DÎ

Slave 20

Ì$+MUL21$-KÎ

Slave 21

Ì$+MUL22$-RÎ

Slave 22

Ì$+MUL23$-YÎ

Slave 23

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Datalogic Lettore di codici a barre

Datalogic

Datalogic QuickScan 2500 Series Manuale utente

Datalogic

Datalogic Gryphon I GBT4100 Manuale utente

Datalogic

Datalogic Gryphon D432 Manuale utente

Datalogic

Datalogic PowerScan BC96 Series Manuale utente

Datalogic

Datalogic Magellan 800i Manuale utente

Datalogic

Datalogic DS4800 Manuale utente

Datalogic

Datalogic QW2520 Manuale utente

Datalogic

Datalogic Gryphon GM44XX Manuale utente

Datalogic

Datalogic DX6400 Manuale utente

Datalogic

Datalogic DS1100 SH2347 Manuale utente

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuale di installazione e funzionamento

Datalogic

Datalogic Magellan 800i Manuale utente

Datalogic

Datalogic BC9 0-BT Series Manuale utente

Datalogic

Datalogic Gryphon DX30 Manuale utente

Datalogic

Datalogic OM-DRAGON Series Manuale utente

Datalogic

Datalogic RIDA DBT6400 Manuale di servizio

Datalogic

Datalogic PowerScan RF SR Manuale utente

Datalogic

Datalogic Gryphon i Manuale utente

Datalogic

Datalogic DS6300 Manuale

Datalogic

Datalogic PowerScan 7000 Manuale utente

Datalogic

Datalogic DS8100A-3002 Manuale utente

Datalogic

Datalogic QuickScan L QD 2300 Manuale utente

Datalogic

Datalogic QuickScan i QD2100 Manuale utente

Datalogic

Datalogic CBX500 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente

Atid

Atid AT188N Plus Manuale utente