Mounting Dream MD2210 Manuale utente
MD2210 INSTALLATION INSTRUCTION
(A1)
17"~39" Max:200x200mm/8x8"
Min:100x100mm/4x4"
x3 x1
TV
1 2
Für die Installationsanweisungen auf deutsch, Siehe Seite 10~11.
Pour l'instruction en français, veuillez vous reporter à la page 12~13.
Para las instrucciones de la instalación en español, favor vea la página 14~15.
Per le Istruzioni in italiano, vedi pagina 16~17.
If you have any questions, please feel free to contact us:
USA E-mail: customers[email protected]
Phone call: (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific Time)
EU E-mail: customercare@mountingdream.com
AU E-mail: customersupport@mountingdream.com
Before getting started, let’s make sure this mount is perfect for you!
1 Is your TV VESA
equal to/greater than
100x100mm/4x4" and
equal to/less than
200x200mm/8x8"?
2 Does your TV
(including accessories)
weigh less than
44 LBS (20 kg)?
4 Installation Tools
(Not Included)
Yes --- Perfect!
No --- This mount is NOT compatible.
MAX:200mm/8"
MAX:
200mm/8"
Yes --- Perfect!
No --- This mount is NOT compatible.
Band Tape
2m
2M2M
5 Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer Service:
● The hardware provided in the package can only use in 0.5" thick or above wooden
board installation on RV.
● The wall must be capable of supporting five times the weight of the TV and mount
combined. According to the wall you're going to install, the structure of your RV may
require additional reinforcement.
● Incorrect installation may result in product damage or body injury. Mounting Dream shall
bear no responsibility for any damage or injury resulted from incorrect installation,
incorrect assembly or misuse.
● Do not apply this product to any purpose not indicated by Mounting Dream.
● Make sure to stow the TV and fully lock the mount in place before your RV is moving.
Pencil Screwdriver Electrodrill Socket Wrench
1/2"(13mm)
3 Where can you
install this mount?
0.5"(12.7mm) thick or above wooden board
Min. 0.5"(12.7mm)
5/32"(4mm)
Wood Drill Bit
1
USA E-mail: cus[email protected]
Phone call: (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific Time)
EU E-mail: customercare@mountingdream.com
AU E-mail: customersupport@mountingdream.com
Parts and Hardware
Allen Key
x1
1-1 Disassemble Wall Plate Unit into Two Pieces
Wall Plate Unit
x1
2
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x50mm
M6x17mm M8x22mm
M4 M6
10mm 2.5mm
Washers
Spacers
TV Screws
x4
x4 x4
x4 x4
x4
x4 x4
x4 x8
x4
x4
x4
Wall plate
TV plate
WARNING:This product contains small items that could be a choking hazard if
swallowed. Before starting assembly, verify all parts are included and undamaged. For parts
shortage or damage, please contact us via [email protected] (USA) or
[email protected] (EU) or customersupport@mountingdream.com (AU).
NOTE: Not all hardware included will be used.
1-2 Choose Configuration
1-3 Select TV Screws
TV back
Bracket Washer
Bracket
Long Screw
Spacer
No, go to PAGE 4 for detailed combination.
Yes, go to PAGE 4 for detailed combination.
TV back
1-4 Need Spacer?
Short Screw
Washer
3
① ①
① ①
② ②
② ②
③ ③
③③
① 100mm x 100mm
② 200mm x 100mm
③ 200mm x 200mm
M8
M6
M4
Tips: If you need to combine M8(c/f) screw with 2.5mm spacer(j), you have to remove
the inner circle.
Screw and washer
Spacer(s), screw and washer
1-5 Attach TV Plate to TV Back
No!
4
Parts and Hardware
Min. 0.5"(12.7mm)
Wall plate
Bolt Head UP!
5/32"
(4mm)
Wall plate
Wall
Plate
Lag Bolt
x4
No!
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to
the next step.
To prevent the TV falling down, the Bolt Head Must Keep UP at this step!!
5
The TV plate is off center about 1"/26mm to the
wall plate. Please consider this point, when
positioning your TV on the wall.
Wooden Board
1"(26mm)
TV plate centerWall plate center
44 LBS (20 kg)
Before hanging TV, please conduct "wall plate installation integrity test" first.
TV
1 2
6
Handle
② Pull out and hold the handle.
③ Turn the handle in the opposite direction.
④ Push and release the handle.
⑤ Turn handle again to tighten or loosen.
① Turn handle (loosen or tighten)
until stopped by mount.
To tighten or loosen the handle
4-1 Tilting angle adjustment (+5°/-15°)：
Loosen handle and tilting bolt, adjust TV to your desired position,
then tighten handle and tilting bolt.
Loosen
Tighten
Tilting bolts
7
-15°
+5°
Handle
4-2 TV leveling adjustment (±5°):
Loosen 2 leveling bolts on the rear of TV plate by maximum 2
turns, adjust to level, and retighten to secure.
Important ! Make sure to stow the TV and fully lock the mount in place
before your RV moves.
Push your TV to the wall. Pull down the strap and lock the TV plate to
the wall plate.
8
Loosen
Tighten
Stow
Pull down
the straps
9
Pull and hold the strap
Pull out
100mm
200mm
100mm
200mm
260mm
467mm 72mm
+90°/-90°
+5°
-15°
Altri manuali per MD2210
1
Indice
Altri manuali Mounting Dream Supporto TV
Mounting Dream
Mounting Dream MD2361-K Manuale utente
Mounting Dream
Mounting Dream MD2617-03 Manuale utente
Mounting Dream
Mounting Dream MD2463 Manuale utente
Mounting Dream
Mounting Dream HM2463-L Manuale utente
Mounting Dream
Mounting Dream MD2868-LK Manuale utente
Mounting Dream
Mounting Dream MD2263-XLK Manuale utente
Mounting Dream
Mounting Dream HM2380 Manuale utente
Mounting Dream
Mounting Dream MD2165-LK Manuale di programmazione
Mounting Dream
Mounting Dream HM2617 Manuale utente
Mounting Dream
Mounting Dream MD2463-03 Manuale utente
Mounting Dream
Mounting Dream MD2463-02 Manuale utente
Mounting Dream
Mounting Dream MD2378-03 Manuale utente
Mounting Dream
Mounting Dream MD2263-LK Manuale utente
Mounting Dream
Mounting Dream MD2658 Manuale utente
Mounting Dream
Mounting Dream MD2378 Manuale utente
Mounting Dream
Mounting Dream MD2104 Manuale utente
Mounting Dream
Mounting Dream MD2268-S Manuale utente
Mounting Dream
Mounting Dream MD2212 Manuale utente
Mounting Dream
Mounting Dream MD2298-XL Manuale utente
Mounting Dream
Mounting Dream MD5425 Manuale utente
